Our Products

Standard Motors Synchron

Standard Motors Synchron

NORD DRIVESYSTEMS synchronous motors based on permanent magnet technology provide high efficiencies. This technology offers low operating costs and can be simply and flexibly combined due to full compatibility with the NORD modular system.

Performance:

1,2 – 5,5 kW

Global approvals and acceptances

Efficiency class:

IE4

 

Nord Smooth Motors Synchron

Nord Smooth Motors Synchron

NORD smooth motors are produced in-house and are available in various sizes. Thanks to their wash-down design they can be used in hygienically demanding environments. This drive solution is also available as an nsd tupH version.

Performance:

0,75 – 2,2 kW

Global approvals and acceptances

Efficiency class :

IE4

Nord Gas Explosion Protected Motors

Nord Gas Explosion Protected Motors

Explosion protected NORD drive solutions have been a part of the NORD product range for decades and can be supplied according to ATEX Categories 2D and 3D for Zones 21 and 22.

Performance:

0,12 – 22 kW

Efficiency classes:

IE1 and IE2

Nord Dust Explosion Protected Motors-centro

Nord Dust Explosion Protected Motors

Explosion protected NORD drive solutions have been a part of the NORD product range for decades and can be supplied according to ATEX Categories 2D and 3D for Zones 21 and 22.

Performance:

0,12 – 22 kW

Efficiency classes:

IE1 and IE2

NORD V-BELT-centro

NORD V-BELT

Robust and low maintenance NORD variable speed drives are reliable drive solutions for applications which operate under continuous load and an optimum solution for simple conveyor systems or for pump applications and agitators.

Performance:

0,25 – 110,00 kW

Universal Smi Worm Gear Motor-centro

Universal Smi Worm Gear Motor

SMI worm gear units provide a high power density and are extremely compact. They have a low-noise torque transmission. Thanks to their simple and effective structure they take up considerably less room than other types of the gear unit. SMI worm gear units are available in the following versions: smooth surface closed surface.

Performance:

0,12 – 4,0 kW

Torque range:

21 – 427 Nm

Nord Universal Si Worm Gear Motor-centro

Nord Universal Si Worm Gear Motor

UNIVERSAL SI worm gear units provide a high power density and are extremely compact. They are characterised by having low-noise torque transmission. Thanks to their simple and effective structure they take up considerably less room than other types of gear unit.

Performance:

0,12 – 4,0 kW

Torque range:

21 – 427 Nma

Nord Universal Worm Gear Motors-centro

Nord Universal Worm Gear Motors

BLOCK worm gear units are characterized by their robust design. The UNICASE principle, which has been tried and tested since the 1980s provides high functionality, low maintenance, and long service life.

Performance:

0,12 – 15 kW

Torque range:

93 – 3 058 Nm

Nord Nordbloc 1 Bevel Gear Motor-centro

Nord Nordbloc 1 Bevel Gear Motor

The new, performance-optimized 2-stage parallel bevel gear units are an innovative NORD design made from high-strength aluminum alloy. Thanks to the washdown version, the new 2-stage NORDBLOC.1 bevel gear units are especially suitable for conveyor applications as well as in the food industry.

Performance:

0,12 – 9,2 kW

Torque range:

50 – 660 Nm

Nord Unicase Bevel Gear Motors-centro

Nord Unicase Bevel Gear Motors

Bevel geared motors with the tried and tested UNICASE principle offer security, as they need little maintenance and have long life cycles. BLOCK bevel gear units are available in various versions and sizes, especially suitable for your application.

Performance:

0,12 – 200 kW

Torque range:

180 – 50 000 Nm

Nord Unicase Parallel -Shaft Gear Motor-centro

Nord Unicase Parallel -Shaft Gear Motor

In combination with central or decentralized frequency inverters, parallel shaft geared motors provide a wide range of system solutions with ultimate efficiency and economy in all systems. The UNICASE concept guarantees long life cycles and low maintenance.

Performance:

0,12 – 200 kW

Torque range:

110 – 100 000 Nm

Nord Standard Helical Gear Motor-centro

Nord Standard Helical Gear Motor

Standard helical gear operation is a design which meets the basic requirements for the performance of gear units and geared motors and among other areas, can be used in intralogistics.

Performance:

0,12 – 7,5 kW

Torque range:

50 – 700 Nm

Nord Standard Helical Gear Motor-centro

Nord Nordbloc. 1 Helical Gear Motor

The NORDBLOC.1 helical gear unit with its smooth surface is an innovative drive solution for all applications where cleanliness is essential. These innovative and patented gear units do not have any installation openings.

Performance:

0,12 – 37 kW

Torque range:

30 – 3 300 Nm

Nord Unicase Helical Gear Motor-centro

Nord Unicase Helical Gear Motors

Functionality with tradition NORD helical gear units have been produced according to the tried and tested UNICASE principle since the 1980s and are characterised by low maintenance and a long service life.

Performance:

0,12 – 160 kW

Torque range:

10 – 26 000 Nm

Grundfos COMFORT hot water circulator pump

Grundfos COMFORT hot water circulator pump

Grundfos COMFORT hot water circulator pump: a brand new, low noise permanent magnet motor allows the energy
consumption of the COMFORT PM range to be reduced to as little as 5-8.5 W.
Combined with the intelligent AUTOADAPT function this sets new standards for energy-efficient hot water recirculation in private homes.

Thanks to the new high efficiency permanent magnet motor the COMFORT range now features two new variants for hot water recirculation. With an energy usage of only 5-8.5 W both the COMFORT pump with AUTOADAPT and the fixed speed COMFORT B pump can significantly reduce the power consumption. In fact, the electricity costs of operating in AUTOADAPT mode requires a mere 1-2 €* per year. Compared to conventional pumps that run continuously this equals a cost reduction of up to 96 %. Moreover, heat energy savings amount to as much as 48 %.

The AUTOADAPT principle The principle of the AUTOADAPT function is really very simple.
In the course of only a couple of weeks the COMFORT pump learns the hot water consumption pattern of the household and adapts to it. The stored data ensures that the pump runs only when required – which significantly cuts back on both water and power waste. Should the consumption pattern change, e.g. during holidays, the COMFORT pump with  recognises the standstill after 24 hours and automatically adapts to holiday mode. On the return of the occupants, the intelligent pump will automatically resume the same  consumption pattern as before the holiday. Consequently, the access to instantly hot water is never jeopardised.

Minimise water waste
All COMFORT pumps – with or without the AUTOADAPT function – combined with a return pipe deliver instantly hot water all over the house. This eliminates the expensive – and annoying – wait for the water to get warm and reduces the annual consumption of domestic water. The results are lower costs while still ensuring the comfort of instantly hot water.

Easy installation
The COMFORT BA pump with autoadapt and the continuously
running COMFORT B pump are equally compact and designed to greatly facilitate installation – even in confined spaces. Both featuring the renowned ALPHA plug all that is really required is to connect the plug and start pumping.

Grundfos ALPHA3 circulator pump

Grundfos ALPHA3 circulator pump

Grundfos ALPHA3 circulator pump is our newest circulator for domestic buildings. It is of the renowned Grundfos quality and guarantees easy installation, world-class energy efficiency and reliable operation in the toughest conditions. For the ultimate benefits of the Grundfos ALPHA3, however, installers need two other components – the ALPHA Reader and the Grundfos GO Balance app. Together, the state-of-the-art ALPHA3 system helps installers complete a hydronic balancing incredibly fast and accurately.

FAST AND EASY BALANCING
With the ALPHA3, the ALPHA Reader and the Grundfos GO Balance app, installers are set for fast and easy system balancing – without compromising on reliability, efficiency and easy installation.

Hydronic Balancing with ALPHA3 and ALPHA reader works with:
Two pipe radiator systems

The GRUNDFOS ALPHA3 is suitable for running in:
Systems with constant or varying flow
One pipe systems
Two pipe systems
Domestic hot-water recirculation
Underfloor heating systems
Systems where night setback is required.

Features and benefits
Hydronic Balancing
No blockage
Best in class efficiency

Benefits of hydronic Balancing:
Savings on heating bill between 7-20 %*
Lower return temperature in the system
Lower noise in the heating system

Grundfos ALPHA1 circulator pump

Grundfos ALPHA1 circulator pump

Grundfos ALPHA1 circulator pump is a complete range of circulator pumps with integrated differential-pressure control enabling adjustment of pump performance to the actual system requirement.

The pumps are energy-optimised and comply with the requirements of the EuP directive EuP 2015.

Advantages

  • High-efficient motors EuP 2015 ready.
  • Suitable for installation in existing systems.
  • Low-noise operation.
  • Built-in electrical and thermal protection of the pump.
  • Simple setting and operation in a very compact design.
  • Plug and play with patented cable plug for safe and easy connection.

Installing a Grundfos ALPHA1 pump will reduce power consumption considerably, lower noise from thermostatic valves and similar fittings and improve the control of the system. The ALPHA1 is a cost-efficient yet high-performing circulator. The reliable pump complies with the strict EuP requirements and is the ideal choice in applications where the well-known UPS has been used to fulfil basic circulator needs.

 

Mve Standard Range

Mve Standard Range

MVE External Electric Motovibrators consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends.

Function:

MVE External Electric Motovibrators can be used as flow aids, on hoppers or silos to improve material discharge, or as drives on vibrating machines for several purposes such as conveying, screening, sizing, or compacting in a variety of industries.
When the MVE is switched on a sinusoidal centrifugal force is provided by rotation of the eccentric weights. With only one MVE fitted on a vibrating machine a rotating force is provided resulting in a circular movement of the machine. Two counter-rotating MVE fitted in parallel on the same machine provide a linear force resulting in a linear movement of the machine. The requirement of circular or linear movement depends on the application.

Features:
  • Centrifugal force: 20 ~ 26,000 kg
  • Vacuum-impregnated windings using Class F insulating materials
  • Premium quality bearings
  • Sturdy FMEA-designed casing
  • ATEX ExII3D and ETL, Class II, Division 2 certification for hazardous environments
Benefits:
  • Wide range of centrifugal force covering all possible applications
  • Multiple voltages matching electric specifications worldwide
Options:
  • 2, 4, 6, 8 poles three-phase
  • 2 poles single phase
  • DC motors available
Accessories:
  • PTC standard from size 60 (available on request for smaller sizes)
  • Split covers for quick mass adjustment on request from size 60
  • Stainless steel covers on request from size 60
Mve-Exe Increased Safety Range

Mve-Exe Increased Safety Range

Increased Safety MVE-E External Electric Motovibrators consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends. Special design features materials used prevent sparking inside the motor.

Function:

Increased Safety MVE-E External Electric Motovibrators can be used as flow aids on hoppers or to improve material discharge, or as drives on machines several purposes such as conveying, screening, sizing, or compacting, in a variety of industries.
When the MVE-E is switched on a sinusoidal centrifugal force is provided by the rotation of the eccentric weights. With only one MVE fitted on a machine a rotating force is provided resulting in a circular movement of the machine. Two counter-rotating MVE fitted in parallel on the same machine provide a linear force resulting in a linear movement of the machine. The requirement of circular or linear movement depends on the application.
Specific materials geometry make Increased Safety MVE-E External Electric Motovibrators suitable highly hazardous environments.

Features:
  • Centrifugal force: 50 ~ 10,000 kg
  • Vacuum-impregnated windings using Class F insulating materials
  • Premium quality bearings sturdy FMEA-designed casing
Benefits:
  • ATEX ExII2GD certification hazardous environments in presence of flammable dusts or gases of all groups
  • Wide range of centrifugal force covering all possible applications
  • Multiple voltages available matching electric specifications worldwide
Options:
  • 2, 4, 6, 8 poles three-phase
Accessories:
  • PTC standard from size 60 (on smaller sizes on request)
Mve-Exd Explosion-Proof-centro

Mve-Exd Explosion-Proof

Explosion-Proof MVE-D External Electric Motovibrators consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends. Special design features and tight tolerances avoid that any possible explosion inside the motor will affect the external environment, making the explosion-proof MVE-D suitable for applications in the oil & gas industry where such a feature is mandatory.

Function:

Explosion-proof MVE-D External Electric Motovibrators can be used as flow aids on hoppers or silos to improve material discharge, or as drives for conveying, screening, dewatering or fluid recovery on vibrating machines, especially in the oil & gas industry, andoccasionally in the recycling sector.
When the MVE is switched on a sinusoidal centrifugal force is provided by the rotation of the eccentric weights. With only one MVE fitted on a vibrating machine a rotating force is provided resulting in a circular movement of the machine. Two counter-rotating MVE fitted in parallel on the same machine provide a linear force resulting in a linear movement of the machine. The requirement of circular or linear movement depends on the application.
Most applications in the oil & gas sector use two MVE Motovibrators per machine to generate linear movement.

Features:
  • Centrifugal force: 800 ~ 5,500 kg
  • Vacuum-impregnated windings using Class F insulating materials
  • Premium quality bearings
  • Sturdy FMEA-designed casing
Benefits:
  • ATEX ExII2GD and ETL Class I, Division 1 and Class II, Division 1 certification for hazardous environments in presence of flammable dusts or gases
  • Wide range of centrifugal force covering all possible applications
  • Multiple voltages available matching electric specifications worldwide
  • Stainless steel mass covers
Options:
  • 2, 4, 6, 8 poles three-phase
Accessories:
  • PTC standard from size 60 (for smaller sizes on request)
MVE Milling-centro

Mve-Milling

“MVE Milling” External Electric Motovibrators consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends, adopting oversized roller bearing to withstand heavy-duty operation.
“MVE Milling” External Electric Motovibrators are available with 8 or 10 pole motors only, due to low r.p.m. required this application.

Function:

“MVE Milling” External Electric Motovibrators are designed application on sieving machines where the different grain components are finely separated classified.
Each is fitted with two “MVE Milling” External Electric Motovibrators mounted in parallel to exploit linear centrifugal force in order to shake the clean at low frequency high amplitude. This has proven to be the best combination to obtain fine accurate separation.

Features:
  • Centrifugal force: 1,200 or 1,400 kg; 8 or 10 poles
  • Vacuum-impregnated windings using Class F insulating materials
  • Oversized roller bearings sturdy FMEA-designed casing
  • ATEX ExII3D hazardous environments in presence of flammable gases
Benefits:
  • Reliable durable due to oversized roller bearings
  • High centrifugal force/size ratio enabling fitting in confined space
  • Multiple voltages matching electric specifications worldwide
MVE-DC Direct Current-centro

MVE-DC Direct Current

MVE External Electric Motovibrators DC consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends that works at 12 or 24 volts.

An MVE originally designed for concrete pump grids and other industrial or agricultural vehicles, capable to resist to heavy-duty environment

Description

Increased Safety MVE-E External Electric Motovibrators consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends. Special design features materials used prevent sparking inside the motor.

Function:

MVE External Electric Motovibrators DC can be used as flow aids, on hoppers installed on vehicles to improve material discharge, or as booster on concrete pump grids to allow an efficient flow of fresh concrete.

Features:
  • Centrifugal force from 50 to  1500 Kg depending on the model
  • Stainless steel covers
  • DC Motor 3,000 RPM 12V-24V
  • Power from 80 to 520 Watt
  • Resistant to oxidation
  • II 3 D EX TD A22 TX IP 66
Benefits:
  • Economical
  • Robust
  • Safe
  • Terminal boxhidedbelow for a better protection
  •  Adjustable force
Mve-F Flanged Vibrators-centro

Mve-F Flanged Vibrators

Flanged  motovibrators “S” series

“S” series “Flanged Motovibrators” consists of an electric motor housed in a FEMA-designed cast casing, with eccentric weights fitted on both shaft ends.
“S” series “Sieves” have been specifically designed and optimized for circular sieve applications, with the target to improve the overall performance of the application.
“S” series “Industrial” have been developed for all other applications, with the aim of reducing maintenance costs and consequently machine shutdown times.

Flanged  motovibrators “I” series

“I” series “Industrial” consists of an electric motor housed in a FEMA-designed cast casing, with eccentric weights fitted on both shaft ends.
“I” series “Industrial” have been designed and optimized for all the applications, with the target to offer a product with a long life time.
“I” series “Industrial” have been developed for all other applications, with the aim of reducing maintenance costs and consequently machine shutdown times.

Function:

S and I Flanged Vibrator have the goal of transmitting the vibration to train solids from liquids, for separating coarser from finer particles, or for reducing soft solids to a pulp.

Features:
  • Centrifugal force: 200 ~ 3.500 kg
  • Vacuum-impregnated windings using Class F insulating materials
  • Premium quality bearings
  • FEMA-designed casing
  • ATEX ExII3D
Benefits:
  • Wide range of centrifugal force covering all possible applications
  • Multiple voltages matching electric specifications worldwide
Options:
  • 2, 4, 6 poles three-phase
Accessories:
  • PTC standard from size 60 (available on request for smaller sizes)
Mve-Fd Flanged Drive-centro

Mve-Fd Flanged Drive

Flanged Screen Devices FD consists of an electric motor housed in a FEMA-designed cast casing, with eccentric weights fitted on both shaft ends and a flange arranged to be connected to the vibrating machine lateral sides with a shaft designed for interconnection between two FD.
Flanged Screen Devices FD have been specifically designed and optimized to be applied onto horizontal or inclined vibrating equipments on mobile and stationary plants.

Function:

Flanged Screen Devices FD have been developed to be the right substitute of:

  • Eccentric masses driven by external AC motor and V belt pulley (circular motion machines);
  • Eccentric shaft driven by external AC motor and V belt pulley (circular motion machines);
  • Eccentric shaft or masses driven by hydraulic motor (circular motion machines);
  • 2 x Conventional unbalance motors (MVEs) installed on a traverse beam (linear/elliptical motion machines);
  • Parallel eccentric shaft/masses driven by external AC motor and V belt pulley (linear/elliptical motion machines).
Features:
  • Centrifugal force: 200 ~ 4,500 kg
  • Vacuum-impregnated windings using Class F insulating materials
  • Premium quality bearings
  • FEMA-designed casing
  • ATEX ExII3D
Benefits:
  • Performance: Most of the eccentric shafts can run only up to 850 rpm while FDs can be supplied in 4, 6 and  8 poles reaching up to 1800 rpm, enlarging the application range of this solution;
  • Easiness of maintenance: FD leaves more space between the screen decks, making  screen media inspection and wear parts replacement easier and quicker;
  • User Friendly: replacing eccentric drives requires extremely skilled personnel and heavy  tools and equipment ,while no special skills are needed to replace FD;
  • Environment Friendly: FDs contain a small amount of grease compared  to approximately 100 / 200 liters of oil required by the traditional eccentric shaft systems;
Options:
  • 6-8 poles three-phase
Accessories:
  • PTC standard
  • Heater on request
Italvibras ITVAF electric vibrators-centro

Italvibras ITVAF electric vibrators

Italvibras ITVAF electric vibrators, suitable to be applied to systems and machines in the precasting industry and whenever a high fixed frequency vibration is requested. The ITVAF series electric vibrators with fixed vibration (6000 or 9000 rpm) provide a centrifugal force of up to 1480 Kgf (14,6 kN).
They are available with either the fixed or cradle connection (RS types).

Power supply
Three-phase voltage from 24V to 690V at the various frequencies, depending on the type and series. Italvibras can supply variable frequency drive VIBRAVAR and different types of variable frequency equipments (CFV, MULTIVAR).

Operation
Continuous service (S1) at the maximum declared centrifugal force and electric power values.

Centrifugal force
Range extended up to 1480 kgf (14,8kN).

Insulation class
Class F (155°C).

Mve-Sv Screen Vibrators-centro

Mve-Sv Screen Vibrators

Description

SV electric vibrator “long” has been designed for quarry & mining, oil & gas sectors. No crossbeam, direct vibration, adjustable Centrifugal Force.

The SV size 75A and 75D are designed to retrofit existing vibrating machines using vibrating motors made by Derrick® Screen Vibrators. Thanks to its versatility, the SV range can also be used in a plenty of other applications:

QUARRY & MINING
Wet and dry solids separation (eg “Stack Sizer” by Derrick®)
Screening (eg “High speed screens” by Derrick®)

OIL & GAS
Drilling fluids recovery systems (eg “Hyperpool” shale shakers by Derrick®)

ADVANTAGES OF OLI SV
OLI SV size 75A and 75D match both the Derrick®’s long vibrator footprints;
First class bearings;
Long bearing life;
Easy mass adjustment positions;
Greased for life, 100% maintenance free.

APPLICATION ADVANTAGES:

The centrifugal force is provided directly on the screen walls, improving screening efficiency and screening mesh life span.
On OLI’s SV it is possible to adjust the centrifugal force  using pre-drilled holes on the adjustable mass.
SV comes with a standard factory preset star connection for high voltage inside the terminal box.
OLI’s SV can also be operated at low voltage by simply changing the position of the connection plates inside the terminal box from Star to Delta.
SVs can be supplied on request with multiple voltages suitable to be used in various countries all over the world.

Function:

Application: Vibrating screens, shale shakers, feeders/conveyors and dewatering screens for quarry, mining, recycling and other sectors
Problem SOLVING: SV acts as a structural part of the machine: it eliminates the crossbeam usually needed to support standard vibrating motors. The centrifugal force is applied directly on the screen walls.

Features:

  • Input voltage: 220-240/380-415V, 290-300/500-525V, 330/575V, 220-277/380-480V, 230/460V
  • Ambient temperature: -20°C/40°C as standard, -20°C/55°C on request
  • IP: 66
  • Thermal protection: Thermistor PTC 130°C included
  • Insulation class: F
Benefits:
  • NO CROSSBEAM – Designed to be installed on vibrating screens and feeders without any support crossbeam.
  • DIRECT VIBRATION – Designed to exert its centrifugal force much closer to the screen walls than traditional foot mounted electric vibrators fitted on a support crossbeam.
  • ADJUSTABLE CF – Available with both adjustable or fixed masses.
Options:
  • Greased for life
  • 2 and 6 poles available on request
Italvibras ITV-VR electric vibrator-centro

Italvibras ITV-VR electric vibrators

Italvibras ITV-VR electric vibrators, suitable to be applied to systems and machines in the precasting industry and whenever a high frequency vibration is requested.

The ITV-VR series electric vibrators are able to provide a centrifugal force of up to 5300 Kgf (52 kN) at a frequency varying from 0 to 6.000 rpm. They are available with either the fixed or cradle connection (RS types).

Power supply
Three-phase voltage from 24V to 690V at the various frequencies, depending on the type and series. Italvibras can supply variable frequency drive VIBRAVAR and different types of variable frequency equipments (CFV, MULTIVAR).

Operation
Continuous service (S1) at the maximum declared centrifugal force and electric power values.

Centrifugal force
Range extended up to 5300 kgf (52kN) with force output adjustable from 0 to 100%.

Insulation class
Class F (155°C).

Italvibras MVB-E-FLC electric vibrators

Italvibras MVB-E-FLC electric vibrators

Italvibras MVB-E-FLC electric vibrators have been designed for use in industrial processes with screens and sieves in environments with a potentially explosive atmosphere, caused by gas and dusts, in compliance with ATEX Directive (94/9/CE). These vibrators can be supplied in B, C, D versions (see page 86) according to the eccentric weights supplied with the vibrator and to be mounted by the user. In particular, these vibrators can be used in areas 1 and 2 (gas) and in areas 21 and 22 (dusts).

Power supply
Three-phase voltage from 220V to 690V, 50Hz or 60Hz; suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile.

Polarity
4 poles.

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.

Centrifugal force
1500 Kgf. (14.7 KN), adjustable with variation of the eccentric weights.

Insulation class
Class F (155°C).

Electric motor
Three-phase asynchronous type. Insulated windings using “drop by drop” trickle system with class H resin.

Italvibras MVB electric vibrators

Italvibras MVB electric vibrators

Italvibras MVB electric vibrators are made up of vertical vibrators with lateral flange and shaft projecting on both sides. These vibrators are typically used in circular screens and medium-size and large sieves, and can be supplied in 4 different versions, depending on type of eccentric weights supplied to be assembled by the user. Size 50 is only available in B, C and D versions. The size 50 complies with the most recent IEC and EN international standards for use in atmospheres with potentially explosive powders. In particular, the size 50 series can be used in areas 21 and 22.

Power supply
Three-phase voltage from 220V to 690V, 50Hz or 60Hz. Suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile.

Polarity
4 poles.

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.

Centrifugal force
Range extended up to 7000 Kgf. (68.7 KN)

Insulation class
Class F (155°C), class H (180°C) on request.

Electric motor
Three-phase asynchronous type. Insulated windings using “drop by drop” trickle system with class H resin.

Italvibras VB-E electric vibrators

Italvibras VB-E electric vibrators

The double-conical flange Italvibras VB-E electric vibrators have been designed for use in industrial processes in environments with a potentially explosive atmosphere, caused by gas and dusts, in compliance with ATEX Directive (94/9/EC). They are supplied without eccentric weights, which must be realised and mounted by the Manufacturer of the vibrating machine. In particular, these vibrators can be used in areas 1 and 2 (gas) and in areas 21 and 22 (dusts).

Power supply
Three-phase voltage from 220V to 690V, 50Hz or 60Hz; suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile

Polarity
4 poles.

Functionality
Continual service (S1) at maximum declared centrifugal force and electric power.

Centrifugal force
Proportioned for a centrifugal force equal to 2500 Kgf. (24.5 KN)

Classe d’isolamento
Classe F (155°C).

Electric motor
Three-phase asynchronous type. Insulated windings using “drop by drop” trickle system with class H resin.

italvibras MVB-E electric vibrators-centro

Italvibras MVB-E electric vibrators

The Italvibras MVB-E electric vibrators have been designed for use in industrial processes with screens and sieves in environments with a potentially explosive atmosphere, caused by gas and dusts, in compliance with ATEX Directive (94/9/EC). In particular, these vibrators can be used in areas 1 and 2 (gas) and in areas 21 and 22 (dusts).

Power supply
Three-phase voltage from 220V to 690V, 50Hz or 60Hz; suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile.

Polarity
4 poles.

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power

Centrifugal force
Up to 1500 Kgf. (14.7 KN).

Insulation class
Class F (155°C).

Electric motor
Three-phase asynchronous type. Insulated windings using “drop by drop” trickle system with class H resin.

Italvibras MTF-E electric vibrators

Italvibras MTF-E electric vibrators

The Italvibras MTF-E electric vibrators have been designed for use in industrial processes in environments with a potentially explosive gas and dust atmosphere, in compliance with ATEX Directive (94/9/CE).
In particular, the MTF-E series can be used in areas 1 and 2 (gas) and areas 21 and 22 (dusts).

Power supply
Three-phase voltage from 220V to 690V, 50Hz or 60Hz; suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile.

Polarity
2 or 4 poles.

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.

Centrifugal force
Range extended up to 2615 Kgf. (27.5 KN).

Insulation class
Class F (155°C).

Electric motor
Three-phase asynchronous type. Insulated windings using vacuum encapsulating up to size 30; using the “drop by drop” trickle system with class H resin for sizes 40-50-70

Italvibras VB electric vibrators

Italvibras VB electric vibrators

Italvibras VB electric vibrators are made up of vertical vibrators with double conical flange. These vibrators are typically used in circular screens and in medium-size and large sieves. They are supplied without eccentric weights, which must be realized and mounted by the Manufacturer of the vibrating machine. The VB series complies with the most recent IEC and EN international standards for use in atmospheres with potentially explosive powders. In particular, the VB series can be used in areas 21 and 22.

Power supply
Three-phase voltage from 220V to 690V, 50Hz or 60Hz; suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile.

Polarity
4 and 6 poles.

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.

Centrifugal force
Proportioned for a centrifugal force equal to 5000 Kgf. (49 KN),

Insulation class
Classe F (155°C), classe H (180°C) on request.

Electric motor
Three-phase asynchronous type. Insulated windings using“ drop by drop” trickle system with class H resin.

Siti Planetary Gearboxes

Siti Planetary Gearboxes

HIGH MODULARITY

  • modular design with compact subgroups, for easy ratio replacement (up to 4 reduction stages).

HIGH VERSATILITY

  • 6 sizes with 4 input and 4 output configurations.
  • 2 output support connections:
  •  Sm (standard)
  •  SmR (high load)
  • 3 options of mounting positions:
  • Direct
  •  Fm (foot-mounting)
  • FL (flange-mounting)

HIGH PERFORMANCES

  • max input power 200 kW.
  •  max torque 25000 Nm.
  •  Ratios up to 3657/1.

HIGH RELIABILITY

  • Sturdy cast iron housing for heavy duty applications.
  •  High resistant gears made in top quality steel.
  •  Largely proportioned bearings.
  •  High quality sealing for improved leaking prevention.
Italvibras MVB-FLC electric vibrators

Italvibras MVB-FLC electric vibrators

The Italvibras MVB-FLC electric vibrators are made up of vertical vibrators with central flange and shaft projecting on both sides. These vibrators are typically used in circular screens and medium-size and large sieves, and can be supplied in 4 different versions, depending on type of eccentric weights supplied to be assembled by the user. Frame size 50 is only available in B, C and D versions. The size 50 complies with the most recent IEC and EN international standards for use in atmospheres with potentially explosive powders. In particular, the size 50 series can be used in areas 21 and 22.

Power supply
Three-phase voltage from 220V to 690V, 50Hz or 60Hz. Suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile.

Polarity
4 poles.

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.

Centrifugal force
Range extended up to 7000 Kgf. (68.7 KN)

Insulation class
Class F (155°C), class H (180°C) on request.

Electric motor
Three-phase asynchronous type. Insulated windings using “drop by drop” trickle system with class H resin.

Siti Mechanical Speed Variators-centro

Siti Mechanical Speed Variators

HIGH MODULARITY

  • matched with a large range of gearboxes, they are suitable to modular assembling of flanges, feet and torque arms

HIGH VERSATILITY

  • 7 sizes, more than 200 versions, with wide range of different mounting positions.

HIGH PERFORMANCES

  • max input power 11 kW.
  • max torque 3000 Nm
  • With the differential device, output speed can be brought to “zero” speed, when the motor is running.

HIGH RELIABILITY

  • Sturdy cast iron housing for heavy duty applications.
  • Planets and races are made in special steel 100Cr6 and are in oil bath, that guarantee the best conditions of transmission of the motion by friction.
Italvibras MTF electric vibrators-centro

Italvibras MTF electric vibrators

The Italvibras MTF electric vibrators, made up of vertical vibrators with lateral flange and with weight protection covers fixed to the opposite part to the flange, adopt innovative technical solutions that increase performance and reliability.
Typically used in circular screens and in small and medium-size sieves, these vibrators are supplied with lamellar or clamped eccentric weights, which regulation is particularly easy.
The MTF series complies with the most recent IEC and EN international standards for use in atmospheres with potentially explosive powders. In particular, the MTF series can be used in areas 21 and 22.

Power supply
Three-phase voltage from 24V to 690V, 50Hz or 60Hz or single−phase 100-130V, 60Hz and 200-240V, 50Hz; suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile.

Polarity
2 or 4 poles.

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.

Centrifugal force
Range extended up to 2615 Kgf. (25.7 KN).

Insulation class
Class F (155°C), class H (180°C) on request.

Electric motor
Three-phase asynchronous type. Insulated windings through vacuum encapsulating up to size 30; using “drop by drop” trickle system with class H resin for sizes 40-50-70.

Italvibras M3 electric vibrators-centro

Italvibras M3 electric vibrators

Designed for industrial continuous duty, the Italvibras M3 electric vibrators feature a compact shape, reduced overall dimensions, terminal box underneath which means also a high electric protection in dusty environments. Multi-holes mounting feet
enable M3 series to match several existing mounting plates. M3 series motors comply with the most recent international
standards for use in explosive dust atmospheres. Particularly M3 series can be used in zones 21 and 22.

Power supply
Three-phase voltage from 24V to 690V, 50Hz o 60Hz or single−phase 100-130V, 60Hz and 200-240V, 50Hz; suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile

Polarity
2 and 4 poles.

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.

Centrifugal force
Up to 311 kgf (3.05 N).

Insulation class
Class F (155°C).

Electric motor
Three-phase or single−phase asynchronous type. Insulated windings using vacuum encapsulating. The rotor is die cast aluminum.

Siti Right Angle Gearboxes-centro

Siti Right Angle Gearboxes

HIGH VERSATILITY

  • 4 sizes with three different configurations and many mounting positions.

HIGH PERFORMANCES

  • max input power 8 kW.
  • max torque 35 Nm.
  • Ratios up to 3/1.

HIGH RELIABILITY

  • Housing built in pressure die casting aluminium, designed in order to guarantee lightness, strength and stiffness.
  •  High resistant gears made in top quality steel.

 

italvibras CDX electric vibrators-centro

Italvibras CDX electric vibrators

Italvibras CDX electric vibrators are explosion-proof vibrators designed for use in industrial processes in a potentially explosive atmosphere. The enclosure of the CDX vibrators is equipped with increased thickness and joints to prevent the transmission of an internal explosion to the surrounding area. The CDX series is characterized and enhanced by many different certifications, depending on the vibrator model.

Power supply
Three-phase voltage from 24V to 690V (limit at 600V for UL and CSA certification), 50Hz or 60Hz, or single−phase 100-130V 60Hz and 200-240V 50Hz (frame sizes 10,20,30); suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile.
Polarity
2, 4, 6 and 8 poles.

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.
Centrifugal force
Range extended to 22400 Kgf. (220 KN),
Insulation class
Class F (155°C).
Electric motor
Three-phase and single−phase asynchronous type. Insulated windings using vacuum encapsulating up to size 35; using the “drop by drop” trickle system with Class H resin for the larger sizes. The rotor is die cast aluminum.

 

]Italvibras MVSI-ACC electric vibrators

Italvibras MVSI-ACC electric vibrators

Italvibras MVSI-ACC electric vibrators, deriving directly from the MVSI series, are characterised by the motor shaft projecting from one side or from both sides, allowing in-line coupling, using a coupling, between two or even more equal vibrators. The MVSI-ACC series is very useful for manufacturers of large screens and vibrating machines, or for plants that require very high centrifugal force values.

With two vibrators of the MVSI-ACC series coupled in line, it is possible to arrive at a centrifugal force of 61.000 Kgf (600kN). Italvibras technical staff can help the user in the choice of the coupling as well as in the application of the vibrators.

Power supply
Three-phase voltage from 230V to 690V, 50Hz or 60Hz; suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile.
Polarity
2, 4, 6 and 8 standard poles, other polarities on request.
Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.
Centrifugal force
Possibility to reach very high centrifugal forces, multiple of the centrifugal force of each vibrator.
Insulation class
Class F (155°C), class H (180°C) on request.
Electric motor
Three-phase asynchronous type. Insulated windings using “drop by drop” trickle system with class H resin. The rotor is die cast aluminum.

Italvibras MVCC electric vibrators-centro

Italvibras MVCC electric vibrators

The Italvibras MVCC electric vibrators with direct current have been designed for use in those situations where network electricity is not present. In particular for hoppers, silos and gate-controls and roll-on roll-off vehicles (concrete mixers, pumps for concrete, plasterers, salt distributors, gravel spreader, fertiliser spreader, hauled silos, industrial sweeper filters). The newly-conceived electric motor, with permanent magnet poles, and the increase in size of the electrical parts, allow constant, high yielding performance.
The MF models have a multi-hole fixing base to adapt to different center distances of drilling.

Power supply
In direct current at 12 or 24V

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.

Centrifugal force
Range extended up to 1520 Kgf. (14.9 KN).

Electric motor
Direct current with permanent magnet poles. The rotor is a wound brush-type with collector

Italvibras MICRO electric vibrators-centro

Italvibras MICRO electric vibrators

The Italvibras MICRO electric vibrators have been designed for continual industrial service in processes where a reduced centrifugal force and reduced overall vibrator size are required. MICRO vibrators are used in numerous applications in feeding, transport, screening, sizing, separation processes, compaction in the automatic machines used in the chemical industry, food industry, pharmaceuticals, packaging and automation in general.

Power supply
Three-phase voltage from 24V to 480V (except M3/4-S02), 50Hz or 60Hz or single phase 100-130V, 60Hz and 200-240V, 50Hz

Polarity
2 poles.

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.

Centrifugal force
Range extended to 65 Kgf. (63.8 KN).

Insulation class
Class F (155°C).

Electric motor
Three-phase and single−phase asynchronous type. The M3/4 model can only be supplied in the single−phase version and does not require a capacitor. Models M3/20 and M3/45 can be supplied both in three−phase and single−phase versions. The capacitor is already included in a case along the power supply cable.

Italvibras MVSS electric vibrators

Italvibras MVSS electric vibrators

Italvibras MVSS electric vibrators are characterized by their total protection from liquids, dusts, aggressive agents and contaminants, thanks to the stainless steel casing and external components.

Power supply
Three-phase voltage from 24V to 690V, 50Hz or 60Hz or single−phase 100-130V 60Hz and 200-240V, 50Hz; suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile.
Polarity
2, 4, 6 and 8 poles

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.
Centrifugal force
Range extended up to 4300 Kgf. (42.4 KN)
Insulation class
Class F (155°C), class H (180°C) on request.
Electric motor
Three-phase and single−phase asynchronous type. Insulated windings using vacuum encapsulating up to size 35; using the “drop by drop” trickle system with class H resin for larger sizes. The rotor is die cast aluminum

Italvibras MVSI-TS electric vibrators

Italvibras MVSI-TS electric vibrators

Italvibras MVSI-TS electric vibrators, obtained directly from the MVSI series, are characterized by the split weight covers. The weight cover is divided into two halves that can be removed in a radial direction. According to requirements it is possible to mount one or two split weight covers. The MVSI-TS series is indispensable in those applications where the position of the vibrator in the vibrating machine makes it difficult to axially remove the weight cover, while it has space to carry this out in a radial direction.

The MVSI-TS series complies with the most recent IEC and EN international standards for use in atmospheres with potentially explosive powders. In particular, the MVSI-TS series can be used in areas 21 and 22.

Power supply
Three-phase voltage from 48V to 690V, 50Hz or 60Hz; suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile.
Polarity
4, 6 and 8 poles.
Functioning
Continual service (S1) at maximum declared centrifugal force and electric power
Centrifugal force
Range extended up to 30500 Kgf. (300 KN)
Insulation class
Class F (155°C), class H (180°C) on request.
Electric motor
Three-phase asynchronous type. Insulated windings using the “drop by drop” trickle system with class H resin. The rotor is die cast aluminum

Italvibras MVTX electric vibrators

Italvibras MVTX electric vibrators

The Italvibras MVTX electric vibrators have been designed for use in industrial processes in a potentially explosive atmosphere. They are used for industrial processes on screens. The enclosure of these screen vibrators is equipped with increased thickness and joints to prevent the transmission of an internal explosion to the surrounding area. Explosion-proof screen vibrators bear the UL, cUL, ATEX and IECEx markings

Power supply
Three-phase voltage from 120V to 690V (limit at 600V for UL and CSA certification), 50Hz or 60Hz; suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile.

Polarity
4 poles typical. 2, 6, 8 poles also available.

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.

Centrifugal force
Range extended to 7930 Kgf. (77.8 KN).

Insulation class
Class F (155°C).

Electric motor
Three-phase asynchronous type. Insulated windings using the “drop by drop” trickle system with Class H resin. The rotor is die cast aluminum.

Italvibras MVSI-E electric vibrators

Italvibras MVSI-E electric vibrators

Italvibras MVSI-E electric vibrators have been designed for use in industrial processes in environments with a potentially explosive atmosphere, due to the presence of explosive gas and dust, in compliance with ATEX Directive (94/9/EC).

In particular, the MVSI-E series can be used in areas 1 and 2 (gas) and in areas 21 and 22 (dusts).

Power supply
Three-phase voltage from 220V to 690V, 50Hz or 60Hz; suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile.
Polarity
2, 4, 6 and 8 poles.

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.
Centrifugal force
Range extended up to 11160 Kgf. (109 KN)
Insulation class
Class F (155°C).
Electric motor
Three-phase asynchronous type. Insulated windings using vacuum encapsulating up to size 35; using the “drop by drop” trickle system with class H resin for larger sizes. The rotor is die cast aluminum.

Italvibras MVSI electric vibrators

Italvibras MVSI electric vibrators

Italvibras MVSI electric vibrators represent the line of reference products for manufacturer’s of vibrating machines and plants operating in many industrial sectors and is made up of the largest range on the market, with centrifugal force values up to 30500 Kgf (300kN). The MVSI series has been conceived to guarantee higher performance in all conditions and environments and complies with the most recent IEC and EN international standards for use in atmospheres with potentially explosive powders. In particular, the MVSI series can be used in areas 21 and 22.

Power supply

Three-phase voltage from 24V to 690V, 50Hz or 60Hz or single−phase 100-130V, 60Hz and 200-240V, 50Hz; suitable for use with a PWM frequency drive from 20Hz to the base frequency with constant torque load profile.

Siti Shaft Mounting Helical Gearboxes

Siti Shaft Mounting Helical Gearboxes

HIGH VERSATILITY

  • 8 sizes that offer a wide range of possible mounting positions.

HIGH PERFORMANCES

  • max input power 135 kW.
  • max torque 14000 Nm.
  • Ratios up to 445/1.

HIGH RELIABILITY

  • Sturdy cast iron housing for heavy duty applications.
  • High resistant gears made in top quality steel.
  • Largely proportioned bearings.
  • High quality sealing for improved leaking prevention.
Generators

Generators

Marelli Motori manufactures generators for combined heat and power applications, marine, oil and gas, industrial industries.

Products range
  • Totally enclosed water to air cooled generators (TEWAC) with top mounted heat exchanger
  • Totally enclosed air to air cooled generators (TEAAC) with top mounted heat exchanger
  • Open drip proof generators (ODP)

Generators are designed in compliance with: IEC EN 60034 – 1 BS 4999 – 5000 VDE 0530 NF 51 – 100 NF 51 – 111 OVE M – 10 NEMA MG 1.22 Generators conform to EU rules. UL/CSA certifications available on request.

Electric Motors

Electric Motors

Marelli Motori manufactures electric motors for a wide variety of industrial applications.

Products range
  • Totally enclosed fan cooled motors (TEFC) for safe areas
  • Totally enclosed fan cooled motors (TEFC) for hazardous areas
  • Totally enclosed water to air cooled motors (TEWAC)
  • Totally enclosed water motors (TEWC)
  • Open drip proof motors (ODP)
Motor for dust-centro

Motor for dust

Series AD, AQ

To Norms IEC-EN 60079-0:2009, 60079-15:2010, 60079-31:2009
Ex tb, Ex tc
Frame size (cast-iron) 63 ÷ 315 certificated by Notified Body
ATEX category 2D, 3D
Group IIIB, IIIC
Protection IP65 ÷ IP55
Maximum surface temperature [°C] T135, T100, T85
Power 0.05 ÷ 200 kW
Three-phase 1 or 2 speed
Single-phase (frame size 63÷100)
Ventilation IC410, IC411, IC416, IC418
Available with brake
Available for Gas + Dust (Series AQ

Non sparking motors-centro

Non sparking motors

Series AN

Norms IEC-EN 60079-0:2009, 60079-15:2010, 60079-31:2009
Ex-nA
Frame size (cast-iron) 63 ÷ 315
certificated by Notified Body
ATEX category 3G
Group II
Temperature class T3 (max 170 °C)
Protection IP55
Power 0.05 ÷ 200 kW
Three-phase 1 or 2 speed
Ventilation IC410, IC411, IC416, IC418
Available IE2

Siti Parallel Shaft Gearboxes-centro

Siti Parallel Shaft Gearboxes

HIGH VERSATILITY

  • 8 sizes that offer a wide range of possible mounting positions.

HIGH PERFORMANCES

  • max input power 187 kW.
  • max torque 14000 Nm
  • Ratios up to 248/1.

HIGH RELIABILITY

  • Sturdy cast iron housing for heavy duty applications.
  • High resistant gears made in top quality steel.
  • Largely proportioned bearings.
  • High quality sealing for improved leaking prevention.

 

Flameproof - explosionproof motors for special applications-centro

Flameproof – explosionproof motors for special applications

Electrical variants

Special voltage and frequency
Bimetallic thermal protection (NC, NO), thermistor (PTC), platinum resistor (PT100)
Single-phase with permanent capacitor
Single-phase with centrifugal switch

Mechanical variants

Protection IP56, IP65, IP66
Special flanges and shafts
Without terminal box (loose leads)
Terminal box on side
Uni-directional bearings, locked bearings or special bearings
SPM probe (vibrations measurement)
Heaters

Siti Bevel Helical Gearboxes-centro

Siti Bevel Helical Gearboxes

HIGH MODULARITY

  • modular design with compact subgroups, for easy ratio replacement.

HIGH VERSATILITY

  • 9 sizes with 4 input versions.
  • Wide range of different mounting positions.
  • Integral geared motor construction, for use in restricted space.

HIGH PERFORMANCES

  • max input power 291 kW
  • max torque 14000 Nm.
  • Ratios up to 226/1.

HIGH RELIABILITY

  • Sturdy cast iron housing for heavy duty applications.
  • High resistant gears made in top quality steel.
  • Largely proportioned bearings.
  • High quality sealing for improved leaking prevention.
Inverter flameproof - explosionproof motors-centro

Inverter flameproof – explosionproof motors

Series A cast-iron

To Norms IEC-EN 60079-0:2009, 60079-1:2007, 60079-7:2007
To Norms IEC 60034-1,5,6,7,8,9,12,14, IEC 60072
Ex-d, Ex-de
Frame size 63 ÷ 315
ATEX category 2G
Group IIB, IIC
Temperature class T3, T4
Protection IP55 ÷ IP66
Power 0.05 ÷ 240 kW
Three-phase
Ventilation IC410, IC411, IC416, IC41

Siti Helical Inline Gearboxes-centro

Siti Helical Inline Gearboxes

HIGH MODULARITY

  • modular design with compact subgroups, for easy ratio replacement.
  • Foot or flange mounting.

HIGH VERSATILITY

  • 10 sizes with 3 input versions.
  • Wide range of different mounting positions.
  •  Integral geared motor construction, for use in restricted space.

HIGH PERFORMANCES

  • max input power 210 kW
  • max torque 12000 Nm
  • Ratios up to 466/1.

HIGH RELIABILITY

  • Sturdy cast iron housing for heavy duty applications.
  • High resistant gears made in top quality steel.
  • Largely proportioned bearings.
  • High quality sealing for improved leaking prevention.

 

Flameproof-explosionproof brake motors

Flameproof-explosionproof brake motors

Series D, H, cast-iron

To Norms IEC-EN 60079-0:2009, 60079-1:2007, 60079-7:2007
To Norms IEC 60034-1,5,6,7,8,9,12,14, IEC 60072
Ex-d, Ex-de
Frame size 63 ÷ 315
ATEX category 2G
Group IIB, IIC
Temperature class T3, T4
Protection IP55 ÷ IP65
Power 0.05 ÷ 132 kW
Three-phase 1 or 2 speed
A.C. or D.C. disk brake
Ventilation IC410, IC411, IC416, IC418

Flameproof – explosionproof motors

Flameproof – explosionproof motors

Series A cast-iron

To Norms IEC-EN 60079-0:2009, 60079-1:2007, 60079-7:2007
To Norms IEC 60034-1,5,6,7,8,9,12,14, IEC 60072
Ex-d, Ex-de
Frame size 63 ÷ 315
ATEX category 1M2, 2G
Group I (mine), IIB, IIC
Temperature class T3, T4, T5, T6
Protection IP55 ÷ IP66
Power 0.05 ÷ 240 kW
Three-phase 1 or 2 speed
Single-phase (frame size 63÷100)
Ventilation IC410, IC411, IC416, IC418

Series F aluminium

IEC 60079-0, IEC 60079-1, IEC 60079-7
Ex-d, Ex-de
Frame size 56 ÷ 80
ATEX category 2D, 2G, 2GD
Group IIB, IIC
Temperature class T4, T5, T6
To Norms IEC 61241-0, IEC 61241-1
A21 – tD
Protection IP55, IP65
Maximum surface temperature [°C] T125, T85, T70
To Norms IEC 60034-1,5,6,7,8,9,12,14, IEC 60072
Power 0.06 ÷ 1.5 kW
Three-phase 1 or 2 speed
Single-phase
Ventilated, unventilated
PAD mounting

lafert-brushless-servo-motors-and-torque-motors

Lafert brushless servo motors and torque motors

Manufacturing brushless motors with permanent magnet motors since the early 90s, Lafert offers extensive proven expertise in this continuously developing technology.

This know-how is combined with the company’s on-going drive for excellence and its ability to offer non-standard solutions, all of which is invested in this product range. On-going research and development, often in conjunction with customers, continues to bestow superior performance in terms of speed, accuracy and control to satisfy application needs.

To demonstrate its strong customisation capacity, Lafert has presented the new series of compact motors with dedicated mechanical components (40, 60, 80, 130 and 180 mm square flange) and special electrical designs (230V and 400V).

Lafert brake motors

Lafert brake motors

The harsher the working environment the greater the demand on engineering standards, and non-standard then becomes the norm. Custom-design and engineering fulfil this need to give the reliability and performance demanded.

The Lafert Brake Motor series is engineered according to the client’s specification. Total control over all aspects of production permits multiple design options including flanges, shafts, brakes plus optimum resistance to external agents and hostile environments for paints, seals, and magnet surfaces.

The result is a range of AC motors produced entirely in-house which incorporates Lafert’s own technical solutions for achieving high efficiency and performance, combined with the option for application-specific customization.

Lafert AC motors

Lafert AC motors

AC motors have a significant impact on the total energy operation cost for industrial, institutional and commercial buildings.

With this in mind Lafert embraced the challenges and brought a combination of IE3 Premium Efficiency and high reliability product to service this lucrative market.

Today, the major factor influencing the motor industry is energy efficiency driven by both increasingly demanding legislation and industry’s greater awareness of green issue responsibilities.

Lafert synchronous PM motors IE4

Lafert synchronous PM motors IE4

High Performance Motors (HP) is an innovative range of PM (Permanent Magnet) Synchronous Motors, achieving IE4 and even IE5 Super Premium Efficiency level, that offers improved efficiency and reduced operating costs. This uniquely engineered product combines the electrical design of Brushless Servomotors with the mechanical design of AC Induction Motors. The result is a compact motor range primarily targeted toward HVAC applications in pumps, fans, compressors, and blowers, where there is an emphasis on reducing the operating cost or weight and size of the motors.

Lafert places great emphasis on materials research. This has resulted in reduced dependency on rare earth magnets, allowing for the use of more readily available permanent magnets, which ensure price and supply stability into the future. Following this development work Lafert have introduced a second generation of PM Synchronous Motors, named HPF, achieving IE4 Super Premium Efficiency level, with more stable and reduced production costs without applying rare earth magnets.

Enclosed Gearing

Enclosed Gearing

Baldor In-Line Helical Reducers have higher torque ratings in a compact design. Available in case sizes 38-88. Utilize NEMA C-Face clamp collar mounting construction ranging from 56C thru 250TC.

Products range
  • In-Line/Concentric Reducers
  • Off-Set/Parallel Reducers
  • Right Angle Reducers
  • Gearing Accessories
Drives

Drives

Baldor Drives offer a complete solution to your AC Motor Control needs.  From soft starters to High Functionality Sensorless Vector Technology, Baldor offers high performance products in with easy to use Keypads. Baldor AC Controls start at FHP and continue up to 550HP and are available in 115V, 230V, 460V and 600V Configurations.

Baldor offers two lines of DC drives for control of DC motors. The BC series starts at fractional and runs through 5 horsepower for single phase 115 and 230 Vac applications.

The DCS800-EP series covers sizes between 5 and 600 horsepower for three phase 230 and 460 Vac. Both provide rugged, heavy duty control for demanding applications.

Products range
  • AC Drives
  • DC Drives
motors-centro

Motors

Baldor’s extensive line of  motors are available in a wide variety of construction enclosures from industrial steel band open designs to harsh applications requiring totally enclosed cast iron designs in both single and three phase.

Products range
  • AC Motors
  • Large AC Motors
  • DC Motors
  • Servo Motors
  • Grinders, Buffers, Lathes
  • Gearmotors
Chiorino polyurethane round and V-belts-centro

Chiorino polyurethane round and V-belts

HIORINO manufactures by extrusion both polyurethane round and V Section belts which are used in various markets for transmission of light duty drives, at medium low speeds and conveying light loads.

Main characteristics: extremely good tensile strengths, elasticity and flexibility values; very high resistance to abrasion, tearing, grease and pure mineral oils, petrols and hydrolisis.

The recommended working temperatures is between –20 and +60 C degrees. Round belting is now available in two versions:

“RU HP” series in blue color with smooth surface, complying to EU regulations EC 1935/2004, EC 2023/2006, EU 10/2011 and FDA, 85 Sh.A hardness;

“RU” series in green colour with rough surface, 92 Sh.A hardness. The V-belts are manufactured in a single range which has a smooth surface, 92 Sh.A hardness, in bright green colour.

Fast joint

Being thermoweldable polyurethane it enables quick endless jointing of belts. For high precision joints of round and V-belts of any size CHIORINO supply the FAST JOINT welder “S15”.

Siti Combined Worm Gearboxes-centro

Siti Combined Worm Gearboxes

HIGH MODULARITY

  • Worm gearboxes suitable for the modular assembling of flanges, feet and torque arm.

HIGH VERSATILITY

  • Wide range of combinations and mounting positions.

HIGH PERFORMANCES

  • max input power 6.6 kW
  • max torque up to 4400 Nm.
  •  Ratios up to 8000/1

HIGH RELIABILITY

  • Up to size 80, housing built in pressure die casting aluminium, designed in order to guarantee lightness, strength and stiffness
  • For sizes larger than 80 we supply a sturdy cast iron housing that is also suitable for heavy-duty applications.
  • “ZI” teeth profile on worms and wormwheels for a silent working without vibrations.

 

 

Chiorino flat transmission belts-centro

Chiorino flat transmission belts

CHIORINO manufactures from raw materials a wide range of high duty transmission belts with excellent resistance to temperature, oils, dust and abrasion.

They are widely used as live roller drives, tangential drives, power transmission drives crossed or multiple, for low, medium and high power, as machine feeding belts and process belts in the paper and folding industry.

Belts can be supplied endless spliced or with prepared ends for on-site splicing, to be done with dedicated solutions and CHIORINO designed equipment.

Special transmission belts can also be manufactured complete with:
  • guides, profiles and sidewalls fitted by means of high frequency and hot air welding machines
  • perforations
Chiorino conveyor and process belts-centro

Chiorino conveyor and process belts

CHIORINO‘s full-cycled production equipment includes sophisticated calendering and spread-coating lines that treat raw materials and combine them with other components to obtain, as the end product, conveyor and process belts for light and medium duty, suitable for any industrial field. The standard production range includes belts with textile carcass made of polyester, cotton, polyamide or fiberglass, covered with:

  • POLYURETHANE
  • PVC
  • ELASTOMER
  • SILICONE

CHIORINO is able to perform all necessary operations in its highly automated workshops including finger punching, skiving, pressing, edge trimming, for the fabrication of endless belt manufacture. Belts can be supplied endless spliced or with prepared ends for on-site splicing, to be done with dedicated solutions and CHIORINO designed equipment

Siti Worm Gearboxes With Primary Reduction-centro

Siti Worm Gearboxes With Primary Reduction

HIGH MODULARITY

  •  Helical worm gearboxes suitable for modular assembling of flanges, feet and torque arm

HIGH VERSATILITY

  • It is possible to supply a separate kit for an easy assembling on the standard gearbox

HIGH PERFORMANCES

  • max input power 7.5 kW.
  •  max torque 2500 Nm.
  •  Ratios up to 404/1.

HIGH RELIABILITY

  • Housing built in pressure die casting aluminiu
  • “ZI” teeth profile on worms and wormwheels for a silent working without vibrations.

 

Rexnord Marbett conveyor components-centro

Rexnord Marbett conveyor components

Chain guide components
Profiles, corner tracks, straight tracks, return rollers, serpentine, plugs for connections.

Product handling components
Guide rails, roller guides, guide rail clamps, guide rail brackets and connecting clamps in plastic or stainless steel.

Frame support components
Side mounting top brackets, bearing heads, support bases and connecting joints, stainless steel components.

Supporting and leveling elements
Different versions in steel and plastic, articulated and fixed, with and without gripper bottom and vibration absorbing feet.

Self-aligning bearings
Square, oval, pillow block, side flange, take-up, round, and other executions, all with open and closed unit. Lubricated for life versions are also available.

Miscellaneous components
Line control elements, hinges, locks, knobs, modular transfer roller plates, rollers, tensioners, nozzles, cable carriage chains, shaft collars and nose-over bars.

Siti Worm Gearboxes-centro

Siti Worm Gearboxes

  • HIGH MODULARITY
  •  Siti worm gearboxes are suitable for the modular assembling of flanges, feet and torque arm.

HIGH VERSATILITY

  •  12 sizes with wide range of different mounting positions.

HIGH PERFORMANCES

  • max input power 55 kW.
  • max torque 3000 Nm.
  • Ratios up to 100/1

HIGH RELIABILITY

  • Up to size 80, housing built in pressure die casting aluminium, designed in order to guarantee lightness, strength and stiffness
  •  For sizes larger than 80 we supply a sturdy cast iron housing that is also suitable for heavy-duty applications
  • “ZI” teeth profile on worms and wormwheels for a silent working without vibrations.

 

 

Rexnord MatTop Chains

Rexnord MatTop Chains

With a large variety of MatTop executions and materials Rexnord has got a conveying solution for virtually any application, especially in combination with the huge TableTop chain progamme. The MCC brand has set a standard for modular conveyor belts in beverage industry and now the cleanable designs and specific accessories make several Rexnord MatTop series very suitable for food industry as well. Also in many other industries, such as container making, pharmaceutical and automotive, lines are equipped with Rexnord MatTop chains.

MatTop chains offer a reliable drive concept, using Rexnord great experience in chain drive technology. The design of both belt and sprocket make a perfect combination meeting high standards for tooth and belt engagement, belt release from the sprocket and allowable elongation. Rexnord and MCC MatTop chains are also known for their clever pin retention systems, which make them very easy to install and maintain.

The range of MatTop chains varies from ½-inch small pitch sideflexing executions to 2½-inch pitch straight running heavy duty solutions. The different series are offered in many variations to suit any applicatio

 

Rexnord PlateTop and Grippers Chains-centro

Rexnord PlateTop and Grippers Chains

Rexnord has a wide variety of Plate Top and Gripper chains. The roller chain based Plate Top is developed for greater loading capacity and permits even higher speeds and longer runs than slatband chains. The roller based Gripper is perfect for product elevating, lowering, rinsing, sterilizing and inverting, by means of soft rubber gripper elements. The base chain is made of steel or stainless steel.

Features
  • Plate Top chains
  • Gripper chains
  • Connection links
  • Sprockets
Rexnord Multiflex and MCC Case Conveyor Chains

Rexnord Multiflex and MCC Case Conveyor Chains

The product program offers a wide range of Rexnord multiflex chains and MCC case conveyor chains. These chains are intended for single lane product handling in a variety of applications.

Features
  • Multifl ex chains
  • Armor Clad
  • Safety
  • Case conveyor chains
  • Pin design
  • Corner discs
Rexnord FlatTop TableTop Chains

Rexnord FlatTop TableTop Chains

In 1938 Rexnord introduced the worlds first metal TableTop chain with integrated top plate and hinge eyes. Nowadays the Rexnord FlatTop and MCC product lines of steel slatband chains offer many materials, types and grades, enabling a solution for any application. Metal slatband chains are ideal for handling glass bottles, PET containers, kegs, crates and many other products.

From standard low friction to specialized high-tech materials for very specific applications, the Rexnord plastic TableTop range is capable of delivering a wide range of solutions for conveyor applications for virtually any industry.

  • Metal TableTop Chains
  • Plastic TableTop Chains
Siemens Backlash-free Couplings

Siemens Backlash-free Couplings

BIPEX-S and SIPEX Backlash-Free Couplings

We offer you a large range of types and sizes in two model ranges for problem-free installation: vibration-damping and electrically insulating plug-in BIPEX-S elastomer couplings and SIPEX metal bellows couplings with high torsional stiffness for angle preserving torque transmission.

Both coupling series are almost completely maintenance- and wear-free and have an exceedingly low moment of inertia. These Siemens couplings are very compact, suitable for a range of installation requirements due to availability of different hub versions, and are very easy to install. The use of high-quality materials combined with optimum workmanship maximizes the availability of your plant.

BIPEX-S and SIPEX are designed for below-mentioned applications in which Siemens has been at home for decades and fit seamlessly into our Integrated Drive Systems concept.

SIPEX couplings are made up of two aluminium hubs and stainless steel bellows. Their metal bellows compensate for axial, radial and angular misalignment with only low restoring forces. They cover a torque range from 0.5 to 5,000 Nm.

BIPEX-S couplings are made up of two aluminium or steel hubs and a polyurethane cam ring. Different cam ring hardness ratings allow the damping ratio and the torsional stiffness to be varied.

Siemens High Performance Couplings

Siemens High Performance Couplings

ARPEX ART high performance couplings consist of pure expertise together with the greatest possible power density. They are used in all high-speed drive systems that require torque transfer where shaft displacement is occurring simultaneously. With ARPEX ART there is nothing left to be desired in terms of both bore capacity and safety: Their compact design allows for compensation of all of the expected displacements in a very small space and, at the same time, the highest possible torque capacity, the lowest possible weight and a very good center of gravity.

The double cardan functional principle of the ARPEX ART enables very high radial offsets, even under great loads. With thin, individual discs, the reaction forces that occur with shaft displacements remain relatively low. The discs of the ART high performance coupling consist of high-alloyed stainless spring steel, and all of the other coupling components are made of high quality, heat-treated steel.

Siemens Rail Couplings

Siemens Rail Couplings

Our Siemens couplings are used for thousands of rail vehicles all around the world, where they have to fulfill multiple requirements, sometimes in extreme conditions. Whether streetcars, underground trains or high-speed trains – FLENDER’s extensive range of rail couplings offers solutions for all types of vehicle.

Be it as a standard coupling or a customized solution, a complete drive concept or an integrative system component – FLENDER rail couplings boast outstanding quality and extraordinary service life.

With almost a hundred years of experience in manufacturing gear units and couplings, we can offer the expertise that your rail vehicle deserves. Our quality assurance measures ensure consistent product features.

Products range:
  • FLENDER ZBG Gear Coupling
  • FLENDER MBG Membrane Coupling
  • FLENDER GKG Cardan Coupling
  • FLENDER LBK Connecting Rod Coupling

     

Siemens Hydrodynamic Couplings

Siemens Hydrodynamic Couplings

FLUDEX couplings are hydrodynamic fluid couplings operating according to the Föttinger principle. The coupling parts on the input and output side are not mechanically connected and thus not subject to wear. Torque is transmitted by the fluid movement in the coupling accelerated by the radial blades.

Benefits:

Soft and shockless starting of machines and conveyors
Acceleration of very large masses without the necessity to use overdimensioned motors
Protection of drive against peak loads in case of frequent starting and reversing operations
Excellent vibration separation and shock damping; greatest possible extent of torsional vibration uncoupling in drives subject to vibration

Siemens Highly Flexible Couplings-centro

Siemens Highly Flexible Couplings

Due to their low torsional rigidity and good damping properties, highly flexible FLENDER couplings are excellently suitable for connecting non-uniformly working machines. They are preferably used in periodically exciting systems, such as drives with internal combustion engines or piston compressors. Because of the large elastomer volume, comparably large shaft misalignments can be compensated.

Transmission of torque possible with nearly no circumferential backlash
Compensates very large axial, radial and angular misalignment (e.g. on flexibly installed machines)
Easy removal and fitting of flexible elements
Series available for use in potentially explosive atmospheres in conformity with directive 94/9/EC

Products range:
  • ELPEX Flexible Ring Coupling
  • ELPEX-B Rubber Tyre Coupling
  • ELPEX-S Rubber Disk Coupling
Siemens Flexible Couplings-centro

Siemens Flexible Couplings

Flexible FLENDER couplings are suitable for plug-in assembly and are easy to mount. The flexible elements compensate shaft misalignments and absorb moderate shock loads of motor or driven machine.
Standard couplings of a wide modular design range and application-related couplings in special design cover a multitude of applications.

Reliable transmission of torque in case of shaft misalignment with low restoring forces
Suitable for vertical mounting position
Electrically insulating series are also available
Low degree of maintenance
Many series and sizes available ex stock at short term

Products range:
  • N-EUPEX Pin Coupling
  • N-EUPEX DS Pin Coupling
  • RUPEX Pin and Bush Coupling
  • N-BIPEX Claw Coupling
Siemens Torsionally Rigid Couplings-centro

Siemens Torsionally Rigid Couplings

As the world’s largest manufacturer of mechanical couplings, thanks to more than 80 years of experience Siemens ensures that machine shafts are securely connected in almost all industrial sectors – worldwide. High-quality FLENDER couplings and clutches are particularly reliable and low-maintenance and require low investment and operating costs. The range comprises couplings in a torque range between 10 and 10 000 000 Nm as well as versions for use in potentially explosive areas in (ATEX 95) and, of course, individually adapted solutions.

ZAPEX gear couplings are particularly suitable for rough operating conditions as occur, for example, in metallurgical engineering or in the cement industry. In addition, ZAPEX couplings stand out due to their power capacity combined with compact design.

ARPEX all-steel couplings are without circumferential backlash, suitable for high ambient temperatures, and especially for machines which must be operated with high precision. Examples are papermaking and printing machines.

Products range:
  • ZAPEX ZW Gear Coupling
  • ZAPEX ZN Gear Coupling
  • ARPEX All-Steel Coupling
Flender Planetary Gear Units-centro

Flender Planetary Gear Units

Highest performance in the smallest possible design envelope

With the FLENDER planetary gear unit series, Siemens offers gear unit solutions for capacity ranges between 10,000 and 5,450,000 Nm in tried-and-true FLENDER quality. 37 sizes guarantee not only a large torque spectrum but also a product range that provides you with every option.

Make the most of the flexibility we offer. Profit from the advantages of FLENDER planetary gear units. Here, you will find off-the-shelf, highly sophisticated drive and gear unit solutions.

Our standard product range already includes solutions for a large number of specific requirements that need to be taken into consideration in a great variety of applications.

Products range:

 

  • FLENDER SIP
  • PLANUREX 2
  • PLANUREX 3
Flender Helical And Bevel-Helical Gear Units-centro

Flender Helical And Bevel-Helical Gear Units

Price, performance and reliability

The FLENDER helical and bevel-helical gear unit portfolio is by far the most comprehensive range of industrial gear units in the world. It includes a multifaceted range of universal gear units, application-specific gear units and customer-specific solutions.

Today, our standardized industrial gear units are especially important due to their high level of availability, their quality and their attractive price-performance ratio. The reliable and highly sophisticated FLENDER universal solutions are the measure of all things for machinery and plant manufacturers in the global gear unit industry. This range of models has it all.

Our selection of universal Siemens gear units design is perfectly supplemented by a wide range of standard options such as motor bell housings, backstops and taconite seals.

For this reason, our portfolio of Siemens gear units provides a nearly unlimited variety of design options. The gear units’ compact design, the choice between horizontal and vertical installation, the various mounting types (base- or shaft-mounted gear units) and the simple attachment of auxiliary components provide you with maximum flexibility when designing your plant.

 

Servo Geared Motors-centro

Servo Geared Motors

SIMOTICS S-1FG1

The SIMOTICS S-1FG1 servo geared motors are compact geared motors. Compared to standard Siemens geared motors with induction machines, they have smaller dimensions, weigh less and have a higher dynamic response.

The range of types covers helical, parallel shaft, bevel and helical worm geared motors in the usual frame sizes and speed/torque classes. The SIMOTICS S-1FG1 servo geared motors use the same operating heads as the SIMOGEAR geared motors.

Flexible servo drive system for demanding applications. Siemens has expanded its drive portfolio for servo applications to include the SIMOTICS S-1FG1 servo geared motor that is optimally harmonized with the SINAMICS S120 inverter system.

Products range:
  • Bevel geared Motor
  • Parallel shaft geared Motor
  • Helical geared Motor
  • Worm geared Motor

     

Sigentics Industrial Generators-centro

Sigentics Industrial Generators

SIGENTICS Industrial Generators are the optimum solution for every application and every location. The range includes high and low voltage, diesel genset, small hydro and turbine driven generators. Whether installed in closed switchgear rooms or outdoors, whether subject to tropical heat, arctic cold, extreme humidity or salt-laden sea air: All the series provide the maximum energy yield – reliably and efficiently.

Siemens industrial generators seamlessly address a power range extending from 0.3 up to over 70 MVA. With their high efficiencies – frequently exceeding 98 percent – our rugged high-voltage generators always achieve the maximum energy yield, reliably and without interruption. Featuring high-quality materials, efficient excitation and optimized cooling, the high operational reliability of our SIGENTICS Industrial Generators directly translates into high revenues. At the same time our Siemens generators design results in extremely low inspection and maintenance costs.

And last but not least: The time-saving concept – from planning through to system integration – ensures that all efficient generators can quickly go online und you reach your maximum energy yield faster.

Products range:
  • SIGENTICS Series Diesel Genset
  • SIGENTICS Series Small Hydro
  • SIGENTICS HV Series Turbine Driven
  • SIGENTICS HV Series S-modyn
DC motors-centro

DC Motors

The DC Motor: Proven Technology, Engineering Excellence

Siemens is known worldwide for engineering leadership and manufacturing excellence. These strengths are built into every Siemens DC motor. Our proven DC technology will continue to provide you with efficient, reliable service – building on our 125 years of experience and extensive know-how.

Our Siemens DC motors have proven its merit in decades of day-to-day use — and in the widest possible range of applications. Thanks to their outstanding reliability, it is hard to imagine a working world without a DC motor.

Alongside our SIMOREG DC-Master inverters and its successor SINAMICS, the Siemens DC motor always forms the ideal system, whenever you need cost-effective drive performance and the highest possible level of availability.

 

High Voltage Motors

High Voltage Motors

High voltage motors for all applications

Siemens high voltage motors can satisfy your every need. All HV motor systems from our extensive portfolio deliver superior reliability and long service lives. Our high voltage motors provide added value because they provide the option of operating on a converter, which generates considerable cost savings over the operational lifecycle.

Our high voltage motors are available in virtually any imaginable configuration, and offer power ranges up to over 100 MW. When you select your high voltage motor from our HV motor lineup, you gain considerable flexibility. This includes several cooling systems and degrees of protection as well as suitability for use in aggressive atmospheres and in potentially hazardous areas.

Products range:
  • Asynchronous Squirrel Cage Motors
  • Asynchronous Slipring Motors
  • Synchronous Motors
  • SIMOTICS AMB-Technology

 

Motion Control Motors

Motion Control Motors

The world’s widest range of motors for motion control

Whether synchronous or asynchronous, with or without gear units – when it comes to selecting the optimum motor for your motion control application, Siemens has the widest motor selection in the world – also covering built-in motors and motor spindles. Plus every Siemens electric motors for motion control is perfectly matched to operate with our family of SINAMICS frequency converters.

Our customers give us many reasons why our motors are right for them. They include the highly dynamic positioning and precise motion sequences of our permanent-magnet servo motors. Our servo motors, main motors and direct drives stand for excellent dynamics and precision. Every motor for motion control is characterized by compact design and high operating efficiency. With a wide range of performance classes and installation sizes, our product range has the right motor for your motion control application, too.

Products range:
  • SIMOTICS S Servomotors
  • SIMOTICS M Main Motors
  • SIMOTICS L Linear Motors
  • SIMOTICS T Torque Motors
  • Motor spindles

     

Low Voltage Motors

Low Voltage Motors

The Right AC Motor for Every Application

Don’t compromise when selecting your low voltage motor. Choose a Siemens AC motor right from the start. We are the leading drive technology manufacturer for industrial applications. As your partner, we offer you the best AC motor systems — at a convincing price/performance ratio and backed by our global support network for production, sales, and service.

Our Siemens low voltage motors cover a performance range from  0.09 to 4000 kW. Advantages of our AC motor systems are many: they are highly efficient with a positive energy balance; they come with explosion protection to meet high safety standards; and they conform to IEC or NEMA standards. The many standard features that come with every Siemens low voltage motor ensure the highest possible cost-effective operation.

Products range:
  • IEC Motors
  • Non-Standard Motors
  • SIMOTICS HT High-Torque Motors
  • Motors acc. to NEMA
  • SIMOTICS XP Explosion-Proof Motors
  • LOHER Motors

     

DC converters

DC converters

Cost-effective in DC

With DC drives from Siemens you can significantly reduce drive technology costs. SINAMICS and SIMOREG converter families deliver top performance and integrated intelligence for maximum availability. Perfectly aligned to our DC motors, our DC drives offer maximum availability and user-friendliness.

SINAMICS DCP is a highly innovative bidirectional DC-DC converter and completes our offering for grid applications. It suits perfectly for industrial as well as for multi-generator applications.
THYRIPOL excitation system is suitable from low to high power classes, mainly in hydroelectric, gas and steam power plants and set itself apart with the high level of reliability and efficiency.

Products range:
  • SINAMICS DCM
  • SINAMICS DCP
  • Power Plant Excitation Systems
  • SIMOREG DC-MASTER
  • SIMOREG CM
Medium Voltage Converters

Medium Voltage Converters

Siemens has over four decades of experience manufacturing nearly every type of medium voltage converter or inverter that exists today.

We have chosen our portfolio of Siemens converters and drives to meet your specific needs with the optimal solution for every type of medium voltage application:
Standard applications such as conveyors, pumps, fans and compressors.
Specialized applications such as rolling mills, horizontal mills, shaft generators, and high speed compressors.

One topology or drive configuration does not fit all applications. This is the reason why we offer Siemens medium voltage converters and inverters featuring 6 different technologies, voltage classes from 2.3 kV to 11 kV and power ratings from 150 kW to 85 MW.

Plus our Siemens converters and drive systems match perfectly with our high voltage motors to provide you with unparalleled levels of reliability, availability, flexibility and performance.

Products range:
  • SINAMICS PERFECT HARMONY GH150
  • SINAMICS PERFECT HARMONY GH180
  • SINAMICS SM120 CM
  • SINAMICS GM150
  • SINAMICS SM150
  • SINAMICS GL150
  • SINAMICS SL150

     

Low Voltage Converters

Low Voltage Converters

First Choice Low Voltage Drive Systems for Variable Speed Operation

Our extensive portfolio of Siemens low voltage converters is the most complete and thoroughly integrated family of drives in the world.

With a high level of flexibility, functionality and engineering comfort, our systems cover all performance levels, from simple frequency converter tasks and coordinated drives through to motion control tasks.

Drive units LOHER DYNAVERT can be recommended for special applications in the area of “explosion protection”.

Products range:
  • Basic Performance Converters SINAMICS V
  • General Performance Converters SINAMICS G
  • High Performance Converters SINAMICS S
  • Frequency Inverters MICROMASTER
  • Converter Systems SIMODRIVE
  • Converters for SIMATIC ET 200pro Distributed IO
  • LOHER DYNAVERT Drive System

 

Mgm Variable Speed Motors

Mgm Variable Speed Motors

Built-in inverter motors consist of three-phase asynchronous electric motors with an integrated frequency inverter. The power range is between 0,37 kW and 15,0 kW while the motor frame is from 71 up to 160.
The unit is composed of a high-efficiency 3-phase asynchronous electric motor and a compact frequency inverter placed at the non-drive motor end.

The basic construction is closed, fan cooled and IP 55 enclosure duty. A built-in inverter motor is able to properly run also under heavy overload conditions thanks to a high thermal reserve; the insulating materials are class F. The frame is made of aluminum alloy up to 132 frame size and of cast iron for above sizes.

Mgm brake motors

Mgm brake motors

MGM brake motors are asynchronous three-phase totally enclosed fan cooled motors:

  • MX Series is the standard series of high-efficiency motors
  • BA Series: AC/DC brake motor series (the engineered series)
  • BM Series: DC brake motor series (Motor plus a DC brake)
  • SMI Series is the built-in inverter motor series

MGM brake motors are designed and assembled as real brake motors. The perfect engineering and assembling combined with a strong and safe brake, make these motors very reliable.

Feet are integrated in the frame (they are not attached to the frame) as standard on the IM B3 foot mounted motors. This feature is very important on those applications where the stress during start/stop requires a very sturdy motor.

SMX and SMI series are provided with IP55 enclosure rating (IP56 or IP66 available on request). BA and BM series are provided with IP 54 enclosure rating (IP55, IP56 or IP66 available on request). Winding Insulation class is F (Class H on request).

SMX and SMI series are provided with IP55 enclosure rating (IP56 or IP66 available on request). BA and BM series are provided with IP 54 enclosure rating (IP55, IP56 or IP66 available on request). Winding Insulation class is F (Class H on request).

All MGM motors are designed for inverter duty. On request it is possible to supply the motor with the encoder fitted on the ND shaft end or to have the ND shaft end ready to fit an encoder (E series).

MGM also manufactures Totally Enclosed Not Ventilated motors (S series).

Wide range of electric pumps-centro

Wide range of electric pumps

Italian-made quality is an essential requirement and conscious investment for a company which from the very beginning has built its reputation on production process control and the reliability of its end results.

SAER is the direct producer of over 1,300 different types of submersible and centrifugal pumps and motors, which we export all over the world. Our extremely high levels of warehouse availability and production speed, which is on average four times higher than that of our competitors, allow us to offer a wide range of solutions which is always kept up-to-date to meet every water lifting and pumping requirement.

  • Centrifugal electrical pumps
  • Eletric submersible pumps
  • Multistage vertical electric pumps
  • Multistage horizontal electric pumps
  • Wet-end motors
KSB valves-centro

KSB Valves

KSB valves are used in power stations, buildings, on ships and in process and water engineering systems in the UK and globally. This diverse product spectrum complements our broad range of pumps, leaving it well positioned to offer all-in solutions for hydraulic applications and draw on its 140 years of experience.

Throughout the company’s history, our engineers have consistently developed new innovative solutions including the first maintenance-free cast iron globe valve (BOA-H) and the first soft-seated globe valve (BOA-W).

A comprehensive product range, short response times and tailored service and spare parts solutions – no other competitor offers a comparable range of products and services. In all phases of the product life cycle, we are on hand to ensure that our customers secure long-term value from their systems.

First-class products and excellent service take top priority. To maintain this level of excellence, we have developed a modern quality management system with globally applicable guidelines.
It is based on the Business Excellence model of the European Foundation for Quality Management.

KSB is the brand with the greatest technical expertise in pumps and valves. The company also offers excellent service, which, in addition to maintenance and repairs for pumps and valves , also includes the supply and installation of KSB spare parts.

We produce the following types of valves:

  • KSB Globe Valves
  • KSB Butterfly Valves
  • KSB Gate Valves
  • KSB Diaphragm Valves
  • KSB Control Valves
  • KSB Non-return Valves
  • KSB ASME/ANSI Valves
  • KSB Ball Valves
  • KSB Valves for Nuclear Applications
  • KSB Pneumatic Actuators
  • KSB Hydraulic Actuators
  • KSB Control and monitoring