Our Products

Worm Gear Reducer Iron

Motovario Motovariator + Worm Gear Reducer – Cast Iron Series

With great reliability developed over 45 years of service, the VAR series motovariator-gear reducer is a viable alternative to electronic drives and is easy to use and maintain. They are available with variators in cast iron from size 003 to 100 combined with NMRV worm gear reducers from size 030 to 150.

Warranty:

Two years from date of delivery.

]R series Sew Eurodrive explosion-proof helical gear units-centro

R series Sew Eurodrive explosion-proof helical gear units

What is special about SPIROPLAN® right-angle gear units is their wear-free gearing. It ensures that the power is transmitted reliably and adjusts the speed in your materials handling system.

With this gearing, our SPIROPLAN® right-angle gear units deliver output torques up to 180 Nm in the power range from 0.09 kW to 3 kW.

The steel-steel material combination and the special tooth meshing enable a short gear unit design for space-saving installation of the drives.

It’s the details that make the difference

Thanks to their aluminum housing, these right-angle gear units are real lightweights. Their special gearing and lubrication for life ensure that they require very little maintenance. These gear units are designed for long and reliable operation. No compromises: The SPIROPLAN right-angle gear units are suitable for almost any drive task due to their many design variants.

DR DRIVES - Single-Phase Motors

DR DRIVES – Single-Phase Motors

DR-M – Single-phase motors
Aluminum cases from size 056 to 100
Power from 0,09 to 2,2 kW

Poles:

2,4

Run capacitor permanently inserted

DR DRIVES – Three-Phase Motors

DR DRIVES – Three-Phase Motors

Aluminum cases and removable feet for the complete range, from size 056 up to 132
Cast iron cases for the complete range, from size 160 to 315
Power up to 200 kW

Poles:

2,4,6

Nominal power and dimensions according to IEC 72-1 standards

High Starting Torque Single-Phase Motor-centro

High Starting Torque Single-Phase Motor

The commercial range also offers 4-pole single-phase asynchronous motors as per IEC international standards, from size 063 to 100, in versions with B5 and B14 flanges and B3 feet, in a power range from 0.12 kW to 2.2 kW.

Certifications Available:

ATEX 3GD – UL/CSA/EAC

Warranty:

Two years from date of delivery.

Double Polarity Three-Phase Motor/Double Polarity Three-Phase Brake Motor

Double Polarity Three-Phase Motor/Double Polarity Three-Phase Brake Motor

The three-phase double polarity motors are available as per IEC international standards, from size 063 to 132 in versions with  B5 and B14  flanges and B3 feet. They are available with double polarity in 2-4, 2-8, 4-8 poles, with alternating or direct current brake.

Certifications Available for D:

ATEX 3GD – UL/CSA/EAC

Certifications Available for DB:

UL/CSA/EAC

Single Phase Motor

Single Phase Motor

The commercial range also offers 4-pole single-phase asynchronous motors as per IEC international standards, from size 063 to 100, in versions with B5 and B14 flanges and B3 feet, in a power range from 0.12 kW to 2.2 kW.

Certifications Available:

ATEX 3GD – UL/CSA/EAC

Warranty:

Two years from date of delivery.

Three Phase And Three-Phase Brake Motors

Three Phase And Three-Phase Brake Motors

Motovario three phase brake motors are the most effective and economical solution for transmissions requirements in alternating current. The three-phase motors are available as per IEC international standards from size 063 to 280 in versions with B5 and B14 flanges and B3 feet. They are available with single polarity (2, 4, 6; IE2 efficiency from size 080, IE3 from size 132) and with alternating or direct current brake and a power range from 0.09 kW to 90 kW.

Certifications Available for TS/TH:

ATEX 3GD – UL/CSA/EAC

Certifications Available for TBS/TBH:

UL/CSA/EAC

Drivon

Drivon

DRIVON, designed to be used in different types of applications (especially pumps, fans and conveyor belts) consists of extremely reliable components and is controlled by our software that provides excellent performance with special attention to the system energy efficiency.

Its Vectorial Check, besides ensuring a constant motor torque throughout a wide range of frequencies without requiring the use of the servo-ventilation at low rpm, provides fast and precise output according to the application dynamic conditions allowing high torque overload of the motor

Parallel Helical And Bevel Helical Gear Reducers For Heavy Industry – Cast Iron-centro

Parallel Helical And Bevel Helical Gear Reducers For Heavy Industry – Cast Iron

The Motovario PBH series of gearboxes for heavy industries is a range of parallel and bevel helical gearboxes up to 4 reduction stages, built as standard and designed specifically to ensure maximum reliability in the most arduous conditions.

PBH series reducers present the classic features of parallel and bevel helical gear reducers such as robustness, efficiency, compactness, and reliability, combined with universality, ease of application and low maintenance which are a result of a modern design concept, typical of quality reducers.

Certifications Available:

ATEX 3GD on special request

W series SPIROPLAN right-angle gear units-centro

W series SPIROPLAN right-angle gear units

Our smallest right-angle gear units: powerful with wear-free gearing

What is special about SPIROPLAN® right-angle gear units is their wear-free gearing. It ensures that the power is transmitted reliably and adjusts the speed in your materials handling system.

With this gearing, our SPIROPLAN® right-angle gear units deliver output torques up to 180 Nm in the power range from 0.09 kW to 3 kW.

The steel-steel material combination and the special tooth meshing enable a short gear unit design for space-saving installation of the drives.

What is special about SPIROPLAN® right-angle gear units is their wear-free gearing. It ensures that the power is transmitted reliably and adjusts the speed in your materials handling system.

With this gearing, our SPIROPLAN® right-angle gear units deliver output torques up to 180 Nm in the power range from 0.09 kW to 3 kW.

The steel-steel material combination and the special tooth meshing enable a short gear unit design for space-saving installation of the drives.

It’s the details that make the difference

Thanks to their aluminum housing, these right-angle gear units are real lightweights. Their special gearing and lubrication for life ensure that they require very little maintenance. These gear units are designed for long and reliable operation. No compromises: The SPIROPLAN right-angle gear units are suitable for almost any drive task due to their many design variants.

Helical Bevel Gear Reducers – Aluminium-centro

Helical Bevel Gear Reducers – Aluminium

The technological content of B-Series gear reducers allows for an extraordinary performance/lifespan ratio. These highly versatile gear units are successfully used in a vast number of industrial and civil applications. B-Series units offer excellent value for money and output torque/weight ratio, especially considering that they need very limited servicing.

Available in aluminium from size A40 to A70.

Certifications Available:

ATEX 2GD/3GD

Helical Bevel Gear Reducers – Cast Iron-centro

Helical Bevel Gear Reducers – Cast Iron

The technological content of B-Series gear reducers allows for an extraordinary performance/lifespan ratio. These highly versatile gear units are successfully used in a vast number of industrial and civil applications. B-Series units offer excellent value for money and output torque/weight ratio, especially considering that they need very limited servicing.

Available in cast iron from size 063 to 163.

Certifications Available:

ATEX 2GD/3GD

Worm Gear Reducers And Combined Units-centro

Worm Gear Reducers And Combined Units

The SW reducer, which complements the Motovario NMRV gear reducer, has a shaft height between 30 and 110 mm (Baugrößen 030 bis 105) and a compact round smooth body casing design that reduces the space as much as possible.

For better reliability and compatibility/effectiveness of supply, the gearing, the bearings, the motor flange and the accessories are those of the NMRV series.

Warranty:

Two years from date of delivery.

S series Sew Eurodrive helical-worm gear units-centro

S series Sew Eurodrive helical-worm gear units

Helical-worm gear units: simple design, high efficiency.

The simple design makes for cost-effectiveness. The individual adjustment of torque and speed allows for space-saving installation of our helical-worm gear units. Use the S series gear units to implement simple tasks in your machine or plant applications.

The combination with a helical gear stage significantly increases the efficiency compared to pure helical-worm gear units. The linear power transmission makes the helical-worm gear units especially quiet in operation. Why? Power is transmitted via the worm shaft and the worm gear to the drive shaft. This dampens the torque impulses and reduces the noise.

The torque ranges from 92 Nm to 4,000 Nm.

Features
  • Significantly more efficient than pure worm gear units due to helical-worm combinations
  • Very low-noise operation
K series Sew Eurodrive helical bevel gear units-centro

K series Sew Eurodrive helical bevel gear units

High degree of efficiency and gearing with high fatigue strength

The compact design of all our gear units is most obvious in our helical-bevel gear units. This property is particularly interesting, for example, for machine applications with limited space available.

Here, you need powerful drive technology with a compact design. This is just the right environment for our helical-bevel gear units with a torque range from 80 to 50,000 Nm.

With their high efficiency in both directions of rotation and at any input speed, these right-angle gear units are very energy-efficient. Their high-endurance gearing is wear-free and lasts a gear unit’s lifetime.

In our portfolio: sizes K..39 and K..49 complete our range of two-stage helical-bevel gear units. They set the standards together with sizes K..19 and K..29: four sizes allow for torques from 80 Nm to 500 Nm.

F series Sew Eurodrive parallel-shaft helical gear units

F series Sew Eurodrive parallel-shaft helical gear units

Design e coppia sono perfettamente abbinati a spazi di installazione limitati.

Una delle nostre migliori riduzioni per spazi di installazione limitati. Una vasta gamma di posizioni e varianti di montaggio consente un ampio spettro di applicazioni anche in condizioni di installazione difficili, senza dover scendere a compromessi sulle prestazioni. E ciò che vale per molti dei nostri riduttori standard Sew Eurodrive: lunga vita operativa senza manutenzione e ingranaggi esenti da usura con elevata resistenza a fatica.

Con una coppia elevata da 130 Nm a 18.000 Nm, i nostri riduttori ad ingranaggi elicoidali ad albero parallelo offrono grandi prestazioni in molte applicazioni di trasporto e trattamento. È possibile scegliere tra opzioni a piede, a flangia o ad albero. Per compiti di posizionamento precisi, i nostri riduttori ad ingranaggi elicoidali ad albero parallelo sono disponibili con gioco ridotto.

Caratteristiche

  • Design sottile per uno spazio di installazione limitato
  • Disponibile anche con gioco ridottoVarianti disponibili

Piede o flangiate

  • B5 o B14 montati su flangia
  • Albero pieno o albero cavo
  • Albero cavo con connessione a chiave, calettatore, albero cavo scanalato o TorqLOC
R series Sew Eurodrive helical gear units

R series Sew Eurodrive helical gear units

The classics: high efficiency and wide range of gear unit ratios

Sew Eurodrive helical gear units are the “hidden classics” in our Sew Eurodrive standard gear units portfolio: 6 single-stage and 14 two- and three-stage frame sizes cover a torque range from 50 to 18 000 Nm. This gear unit series is also far ahead in terms of gear unit ratios: from i = 1.30 to i = 289.74, in double gear units even i = 27 001. Torque ratings and gear unit ratios this finely stepped are hard to find in the market.

The demand for high output speeds or low weight is met by the R gear units as well, of course. Always with a high level of efficiency, our helical gear units offer an optimum ratio between torque output and installation space.

Variants of the helical gear unit series RX / R / RM

  • Single- or multi-stage
  • Foot – or flange-mounted
  • Foot – and flange-mounted
  • Flange – mounted with extended bearing housing
Worm Gear Reducers For Aggressive Environments

Worm Gear Reducers For Aggressive Environments

The need to provide geared motors suitable for use in wet and corrosive environments has led Motovario to design a new product range specific to these fields.

These products use materials, surface treatments, components and mechanical process for the motor and gearbox to increase both resistance and reliability.

Warranty:

Two years from date of delivery

Worm Gear Reducers, Combined And With Pre-Stage Reduction Unit

Worm Gear Reducers, Combined And With Pre-Stage Reduction Unit

NMRV and NMRV POWER Motovario worm gear reducers currently represent the most advanced solution to market requirements in terms of efficiency and flexibility.

The new NMRV Power series, also available as compact integral helical/worm option, has been designed with a view to modularity: low number of basic models can be applied to a wide range of power ratings guaranteeing top performance and reduction ratios from 5 to 1000.

Helical Gear Reducers R – Cast Iron

Helical Gear Reducers R – Cast Iron

Designed to offer maximum reliability even in the harshest operating conditions, the R product series is suitable for applications that require high radial loads. The R-series includes a large number of extremely versatile versions.

Certifications available (only for R/1):

ATEX 2GD/3GD

Warranty:

Two years from date of delivery.

Helical Gear Reducers – Aluminium

Helical Gear Reducers – Aluminium

Designed to offer maximum reliability even in the harshest operating conditions, the HA product series guarantees complete versatility and is suitable for applications that require high radial loads.

The H-series includes a large number of extremely versatile models, in cast iron (sizes 030 to 140) or aluminum (sizes A30 to A60) casing.

Certifications Available:

ATEX 3GD

Warranty:

Two years from date of delivery.

Helical Gear Reducers – Cast Iron

Helical Gear Reducers – Cast Iron

Designed to offer maximum reliability even in the harshest operating conditions, the Motovario helical gear reducers – H series guarantees complete versatility and is suitable for applications that require high radial loads.
The H-series includes a large number of extremely versatile models, in cast iron (sizes 030 to 140).

Certifications Available:

ATEX 2GD/3GD

Warranty:

Two years from date of delivery.

Shaft Mounted Gear Reducers – Cast Iron

Shaft Mounted Gear Reducers – Cast Iron

Specifically designed for applications involving conveyors or augers, these units are also suitable for a wide variety of industrial fields.
The S series Motovario shaft mounted gear reducers, available in cast iron from size 050 to 125, offer a wide range of reduction ratios, ensuring maximum efficiency in all operating conditions.
The new S Series includes two new sizes, 140 and 150, to extend the shaft mounting to heavier applications.

Certifications Available (up to size 125):

ATEX 2GD/3GD

Grundfos DMX mechanical diaphragm dosing pump-centro

Grundfos DMX mechanical diaphragm dosing pump

Grundfos DMX mechanical diaphragm dosing pump has proven its worth in dosing applications worldwide. With their robust diaphragm-based design and their high-quality motors DMX pumps require minimum maintenance and are best choice for many dosing applications. The DMX range is highly versatile: it covers a wide flow range and offers a variety of dosing head sizes, materials and accessories.

Accurate dosing – all the time
The diaphragm design ensures that the dosing flow variation is below ± 1.5 % and the linearity deviation is kept below 4 % at all times. This allows very precise dosing of your chemicals – as much as necessary, as little as possible.

Smooth and low-pulsation dosing
The DMX series combines sophisticated drive technolo­gy and gear kinematics to ensure smooth and low-pulsation dosing without pressure peaks. This means less stress to all system components, such as tubes and valves, and leads to longer service intervals for the entire system.

Motors to match application needs
For applications with specific motor requirements, the versatile DMX range offers high-quality motors for 50 Hz, 60 Hz, 100 Hz (with Variable Frequency Drive VFD), as well as EX classified or ATEX-certified motors, if required.

Grundfos DDI digital diaphragm dosing pump-centro

Grundfos DDI digital diaphragm dosing pump

Grundfos DDI digital diaphragm dosing pump from 75 ml/h up to 150 l/h with real setting of the flow rate. The integrated high-performance microelectronics and the innovative speed-regulated drive technology produce a precise and continuous dosing guaranteeing consistent media mixing and process quality. The dosing rate is simply entered in liters per hour – and the pump takes care of the rest.

Digital Dosing
The use of stepper motor/EC drives optimizes control of the stroke speed and makes it extremely accurate. The duration of each pressure stroke varies according to the flow setting. The suction stroke time always remains constant but can be lengthened using the anti-cavitation function and thus adapted to the relevant needs. This way suction always takes place with the full stroke volume. This results in continuous dosing and lower pulsation in the dosing system – important factors in ensuring smooth pumping of outgassing media and in installations requiring longer suction lines.

Cost-effective dosing
DDI keeps energy costs at a record low, thanks to the advanced EC motor technology. Maximum efficiency is also ensured even by flows of 150 l/h

With a high accuracy of +/- 1.5 % repeatability throughout the adjustable range, DDI pumps reduce the consumption of chemicals by precisely dosing the required amoun

Areas of application
Paper production
Food and beverages industry
Industrial process water and sewage treatment
Drinking water treatment

Benefits:
High precision and ease of use
Flexibility Adaptability
Able to handle highly viscous media
High turndown ratio and functionalities allow large range of applications
Flow Control
Double PTFE diaphragm
Diaphragm leak detection

Grundfos CM close-coupled horizontal multistage pump-centro

Grundfos CM close-coupled horizontal multistage pump

Grundfos CM close-coupled horizontal multistage pump (=Centrifugal Modular) has been created with compactness and modularity as two of its central features, making numerous configurations possible. The pump is basically composed of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter what the application.

The pumps are of the close-coupled type.

The difference between the CM and the CME pump ranges is the motor. CM pumps are fitted with mains-operated motors, whereas the motors for CME pumps have an integrated frequency converter.

Both CM and CME pumps have mechanical shaft seals.

The CM and CME pumps are available in cast iron or stainless steel (AISI 304/DIN 1.4301 stainless steel, which is for water and non-corrosive liquids, and AISI 316/DIN 1.4401 stainless steel, which offers a high degree of corrosion protection against aggressive liquids).

Applications
The CM or CME pump is a multi purpose pump for both industry and water boosting in general.

It is compact, noiseless, reliable and flexible, and this make it an optimal solution for installation and interaction with other components in small and large systems or as a stand-alone pump.

Features and benefit
Compact design
Modular construction/customised solutions
Worldwide usage
High reliability
Service-friendly
Wide performance range
Low noise level
High-performance hydraulics
Electro-coated cast-iron parts
Customised solutions
Grundfos motor
E-solutions
High efficiency.

Grundfos UPML – XL GEO OEM circulator pump-centro

Grundfos UPML – XL GEO OEM circulator pump

Grundfos UPML – XL GEO OEM circulator pump is made as an extension of the basic UPM GEO up to variable flows to 180W. This circulator pump is particularly suitable for coldwater applications. The pump is designed to be integrated in geothermal heating pumps as well as in heating and air-conditioning systems with remote control of the speed, corresponding to low-voltage PWM (pulse-width modulation) signal input.

2 basic GEO variants are available

UPML GEO with a power consumption up to 140W
UPML GEO Range
UPML GEO 25-105 130 PWM
UPML GEO 25-105 180 PWM
UPML GEO 32-105 180 PWM

UPMXL GEO with a power consumption up to 180W
UPMXL GEO Range
UPMXL GEO 25-125 130 PWM
UPMXL GEO 25-125 180 PWM
UPMXL GEO 32-125 180 PWM

Characteristic Features
Glandless circulator pumps integrated in products shall have an energy efficiency index (EEI) of not more than 0.23, the benchmark level being 0.20
Controlled via a digital low-voltage pulse-width modulation (PWM) signal which means that the speed of rotation depends on the input signal. The speed changes as a function of the input profile
A PWM feedback signal provides information about the current performance of the pump, such as current power consumption or various alarm or warning modes
Motor protected against condensed water by means of drain holes and double-coated wiring
Fit for operation in condensing environments thanks to the electronics being separated from the motor

Benefits
Ready for Conversion according to Ecodesign Requirements for 2015
Low Energy Consumption
Great Flexibility for System Configuration due to different control mode options as internally or externally controlled
System and Pump Protection due to various alarm functions

Grundfos UPM3 Hybrid OEM circulator pump-centro

Grundfos UPM3 Hybrid OEM circulator pump

By combining external controlling through signal entry with internal self-controlling, the Grundfos UPM3 Hybrid OEM circulator pump is all your circulator needs in one product, providing you with access to a full range of settings. For all kind of applications with flexible settings in OEM production or in the installation field.

Characteristic Features

  • Glandless High Efficiency circulator for integration in HVAC systems; EEI ≤ 0.20 EN16297/3
  • Smallest design ever for a circulator; smaller than the well-known UPS circulator
  • Externally and internally controlled circulator
  • Substitutes UPM2 and ALPHA2 pumps
  • Available with many standard and customized housings
  • Active or passive inrush current limitation
  • Ambient temperatures of up to 70 °C.

Benefits
Lowest space requirements ever for a circulator integrated in an appliance
Optimised design fit for easy accessibility
Easy access to the user interface from front
Easy access to the connectors from front
Easy access to the pump head screws from the front
Easy access to the de-blocking screw from front
Intelligent configuration
5 control modes, 18 curves, PLUS 2 AUTOADAPT proportional and constant pressure
Different signals and profiles available (PWM A, PWM C, KMBus)
Standard return signal showing power consumption, alarm and operation status
Other customized input profiles and different return profiles are possible e.g. flow estimation
Ready for Conversion according Ecodesign requirement for August, 2015 exceeding benchmark level; EEI ≤ 0.20 EN16297/3
Unmatched reliability
Field and lab tested product quality
Ceramic bearing shaft – The UPM3 comes equipped with ceramic bearing shafts for a long and trouble-free lifetime. The ceramic material is extremely durable and will not wear.
Double de-blocking system – Electronic de-blocking that maintains the maximum starting torque up to 25 Ncm and manual de-blocking accessible from the front without demounting the control box.
High temperature resilience – The resilience to heat will enhance the possibilities of system integration enormously. Ambient temperatures of up to 70 °C.

Grundfos Unilift KP submersible drainage pump-centro

Grundfos Unilift KP submersible drainage pump

Grundfos Unilift KP submersible drainage pump are submersible drainage pumps for pumping drain water or grey wastewater. The KP is suitable for both temporary and permanent free-standing installation or installation in collecting tanks.

All Unilift KP pumps can be supplied with or without a level switch for automatic or manual operation. The strainer is clipped onto the pump housing and can easily be removed for cleaning and maintenance.

The robust design – all metal parts in contact with the pumped liquid are made of stainless steel – makes it ideal for rough environments. The outer casing is made in one piece. The motor is a canned motor with liquid-filled rotor chamber and water-lubricated bearings.

The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature the motor restarts automatically.

Applications
The Unilift KP pumps are designed for the pumping of:

Water from rivers and lakes
Rainwater, drainage water and water from flooding
Water for filling/emptying containers, ponds, tanks, etc.
Effluents from showers, washing machines and sinks below sewer level
Pool water
Ditch drainage water
Lowering groundwater
Domestic effluents from septic and sludge-treating systems
Effluents from viaducts, underpasses, etc.

Grundfos TPE3-TPE2 inline circulator pump-centro

Grundfos TPE3-TPE2 inline circulator pump

Grundfos TPE3-TPE2 inline circulator pump provides unrivalled efficiency and a wide range of intelligent functionalities that makes it much more than a pump. TPE3 has a built-in heat energy meter as well as flow limiting functions eliminating the need for a pump throttling valve. With a wide range of intelligent control modes to choose from, the pump is easily commissioned to the system it is being a part of.

With a number of configurable relays and analog inputs, the complete TPE3 I/O package allows for better system monitoring and optimal pump regulation. It is supplied with wireless technology which enables it to connect with up to four single TPE3 pumps.

Connect and set-up any HVAC sensor to TPE3 and let the pump take charge of the system pressure and flow on basis of the ΔT and ΔP in the system. The intelligent TPE3 is a true plug-and-pump solution.

TPE2 is the ideal pump if you do not need the intelligent functions but instead want to connect all external sensors by yourself, if you want the pump to run at constant speed, or if you want an existing BMS system to control the pump.

Being part of the TP-family, TPE3 and TPE2 pumps are of the close-coupled type, i.e. pump and motor are separate units. Consequently, the pumps are less sensitive to impurities in the pumped liquid than similar pumps of the canned rotor type.

Applications
TPE3 and TPE2 are all-round In-line pumps that can be used in all heating, cooling and district energy systems. TPE3 and TPE2 make a significant difference in terms of comfort and system efficiency in several situations. Examples are:

One-String Heating Systems
Increase system efficiency and avoid penalties by a TPE3 that operates based on ΔT across the system to avoid increased return temperature.
Heat Recovery System
Reduce water temperatures and reduce costs: With a TPE2 pump you can add two temperature sensors and the pump will adapt the circulating flow in the system to what is really needed.
Boiler Shunt Pump
Boiler protection and reduced cost of operation: You can now use the TPE3 and an added temperature sensor instead of a normal pump running at full speed. The sensor ensures that the right temperature is maintained at all times.
Domestic Hot Water Recirculation
Gain control of hot water temperatures and save: Traditionally, a throttled constant speed pump runs 24/7 to ensure instant hot water, which is a waste of energy. A TPE3 can be applied and put in temperature control mode and the pump will maintain the desired

Grundfos SOLAR PML OEM circulator pump-centro

Grundfos SOLAR PML OEM circulator pump

The Grundfos SOLAR PML OEM circulator pump is energy optimized for small and medium solar thermal charging station in which the demand is mainly on small reduced flow.

Characteristic Features

  • Glandless circulator pumps integrated in products shall have an energy efficiency index (EEI) of not more than 0.23, the benchmark level being 0.20
  • Controlled via a digital low-voltage pulse-width modulation (PWM) signal which means that the speed of rotation depends on the input signal. The speed changes as a function of the input profile.
  • Cataphoretically coated cast iron housing
  • Electronics separated from motor, motor protected against condensed water by drain holes and double-coated wiring

Benefits
Ready for Conversion according to Ecodesign Requirements for August, 2015
Fit for cold antifreeze media containing glycol or ethanol
Fit for condensing environments

Grundfos SE – SL wastewater pumps-centro

Grundfos SE – SL wastewater pumps

Grundfos SE – SL wastewater pumps provide the highest total efficiency on the market. Innovative technologies from Grundfos bring together intelligence, motors, hydraulics and functionality to meet the challenges of modern wastewater, maximising the hydraulic, electrical and mechanical efficiency of your pumps.

The pumps are available with SuperVortex impellers for applications with required low operating hours, dry matter content up to 5 %, and a spherical free passage up to 100 mm, or with the S-tube impeller for applications with required high operating hours, dry matter content up to 3 %, and a spherical free passage up to 160 mm.

 

The S-tube impeller is the only impeller on the market designed to cope with the challenges of modern wastewater with varying dry matter content. The simple and robust design of the S-tube impeller offers world class hydraulic efficiency without compromising free passage.

Built for years of trouble-free operation, the SE and SL ranges can operate submerged or dry installed without motor cooling. In addition, they are extremely reliable and very easy to service.

Applications
The SE and SL ranges of pumps handle wastewater, process water and unscreened raw sewage in heavy-duty municipal, utility and industrial applications. They can be permanently installed using an auto-coupling guide-rail system or a fixed pipe connection; the pumps are also suitable for freestanding installation or for use as portable utility pumps.

Features and benefits.
Motor made of IE3 components fro substantial energy and cost savings.
Intelligent adaptive controls ensure reliable operation with low energy consumption.
Integrated analogue sensors offer complete monitoring of pump condition.
Lifting handle designed for optimum point-of-balance and correct lifting.
Smooth, easy-to-clean surface is extremely robust and impact-resistant.
One cable to the pump, simplifying pump installation, commissioning and maintenance.
Moisture-proof connector ensures that liquid cannot penetrate into the motor.
Patented SmartSeal auto-coupling gasket provides a completely leak-proof connection.
Easy-to-remove bolts for pump servicing do not require special tools.
Double mechanical shaft seal ensures longer operation time with less downtime.
Short rotor shaft reduces vibrations to protect shaft seals and bearings.
Closed cooling system for dry installation.
Choice of SuperVortex or S-tube impeller.
SmartTrim allows for easy adjustment of impeller clearance for maximum pump efficiency.

Grundfos SB and SBA submersible booster pump-centro

Grundfos SB and SBA submersible booster pump

Grundfos SB and SBA submersible booster pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications and private wells.

The pump is available in two versions:

SB
The Grundfos SB is a submersible pump for the pumping of clean water. It is designed for use in domestic applications. The pump itself is very silent, and when installed underground in a rainwater collecting tank or well, noise will never become an issue. The SB pump requires an external controller, like Pressure Manager, for automatic operation.

Features and benefits
Flexible selection – Pump + controller
Complete control and monitoring
Easily accessible controller – for service & replacement

SBA
The new Grundfos SBA is a complete all-in-one unit. It is built on the proven SB platform, but comes with an integrated control unit – eliminating the need for an external pump controller.

The SBA is literally a plug- and pump solution. Once installed and connected to the piping, all you need to do is switch on the pump.

Features and benefits
Easy selection – one unit
Easy installation – one unit
Flexible installation – no controller inside the house
All SB and SBA pumps are available in two main variants

With integrated suction strainer (1 mm mesh)
Or with side inlet/flexible suction hose with floating suction strainer (1 mm mesh).
All variants are available with or without float switch:

The float switch offers automatic operation and dryrun protection, stop at low water level, ensuring that surface fragments do not enter the strainer.

Applications
The SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications.

Features and benefits
Noiseless operation
High reliability
Integrated protection.
Floating suction strainer
The model with floating suction strainer always draws the water from just below the water surface where the water is clean and free from solid particles.

Grundfos MQ self-priming pump

Grundfos MQ self-priming pump

Grundfos MQ self-priming pump is a compact water supply system designed for domestic, agricultural and horticultural applications.

Applications

The MQ pump is designed for water supply and pressure boosting

  • in private homes
  • in summer houses and weekend cottages
  • on farms
  • in market gardens and other large gardens

The pump is suitable for pumping of potable water and rainwater

Features and benefits
All-in-one pressure booster unit
Easy to install
Easy to operate
Self-priming
Dry-running protection
Low-noise
Maintenance-free.

Grundfos MAGNA/UPE circulator pump-centro

Grundfos MAGNA/UPE circulator pump

Grundfos MAGNA/UPE circulator pump make up a broad range of small, medium and large circulator pumps fitted with communication equipment and motors with electronic speed control based on permanent magnet (PM) and compact stator motor technology.

The MAGNA is an innovative member of the Grundfos family of high-quality circulator pumps. With a MAGNA, you can stop worrying about complicated pump settings. Simply install the pump and leave it on the factory setting, AUTOADAPT (MAGNA only). The MAGNA will automatically analyse the heating system, find the optimum setting and then continuously adjust its operation to changes in demand. The result is optimum comfort and minimum energy consumption.

In addition, MAGNA pumps are extremely flexible and reliable, and have low noise levels, long life and no maintenance requirements. They are fitted with IR communication and can offer external control and monitoring via expansion modules.

Applications
GRUNDFOS MAGNA/UPE pumps are designed for circulating liquids in heating systems in blocks of flats, schools, hospitals, hotels, industry, etc.

These pumps, which have stainless steel pump housings, can also be used in domestic hot-water systems. GRUNDFOS MAGNA pumps are suitable for the following:

Systems with constant or varying flows where it is desirable to optimise the pump duty point
Systems with varying flow-pipe temperatures
Systems where night setback is required.

Features and benefits
Highly efficient,with communication facilities
AUTOADAPT control mode as default setting, suitable for most applications
Integrated differential pressure control (proportional and constant pressure control)
Low noise
High starting torque
Automatic night setback
Motor based on permanent-magnet/compact-stator technology
Integrated frequency converter
Self-venting pump housing
Stainless steel pump housing
Twin-head versions
Wireless remote control, R100
Communication via GENIbus or LON.

Precision Planetary Gearbox-centro

Precision Planetary Gearboxes

  • KR – Precision planetary right angle gearbox
  • LCK – Precision planetary right angle gearbox
  • TQK – Precision planetary right angle gearbox
  • LC – Precision planetary gearbox
  • MP – Precision planetary gearbox
  • SL – Precision planetary gearbox for pulley drives
  • TQ – Precision planetary gearbox
  • TR – Precision planetary gearbox
  • TQF – Precision Planetary gearbox
Grundfos fire systems end-suction pump-centro

Grundfos fire systems end-suction pump

Grundfos fire systems end-suction pump NBF is an end-suction pump made for fire sprinkler pump applications. NBF is a close-coupled type and NKF is a long-coupled type. The NKF fire system is an NBF or NKF end-suction pump integrated with a coupling and a driver, which may be an electric motor or a diesel engine, assembled on a base frame.

Electric pump types can be ordered as a COMPACT model (inclusive of a controller integrated onto the baseframe). Diesel-driven NKF. A controller always forms a part of the system.

Materials
The pump materials are in compliance with EN 12845 and prEN12259-12:

Impeller and wear rings are made of bronze
Wet parts such as shaft, washers and nuts are made of stainless steel
Castings are made of cast iron.

Controller
Grundfos offers a complete, factory-assembled controller in a steel plate cabinet, suitable for wall mounting or to install free-standing. The controller complies with the EN 12845 standard. The controller for diesel-powered pumps is always mounted on the base frame.

Electric motor
The electric motor is an MG or MMG motor complying with local standards for electric motors. As from 16 July 2011, the motors used in Europe will be IE2 = EFF 1 motors.

Diesel engine
The diesel engine can operate continuously at full load at site elevation with rated output in accordance with ISO 3046-1:1986. The pump reaches full operational speed within 15 seconds; the engine is capable of starting at a room temperature of 5 °C.

Each complete engine pump unit is tested on the manufacturer’s test bed for at least 1.5 hours at rated flow rate, and the result recorded on the test certificate.

Applications
The Grundfos fire pump units are typically used in fire-fighting applications for supplying water to fire-hose reels, fire hydrants or sprinkler systems.

Features and benefits
Pumps are made according to EN12845 and PrEN12259-12
Electric or diesel powered
Designed for superior functionality and performance reliability
Simple installation and easy maintenance
Compact design
Customised and reliable solutions
Widest range from one supplier.

Grundfos DW submersible contractor pump-centro

Grundfos DW submersible contractor pump

Grundfos DW submersible contractor pump isrobust, portable submersible pumps with a vertical discharge port. Available with motors from 0.8 to 20 kW, they are designed to handle dewatering at construction sites, at excavation sites, in building drainage and in similar applications where there is a need to pump raw water or/and at high pressure.

DW main parts are made of aluminium in order for them to be as light as possible. This factor, in combination with the compact design and the high-pressure capabilities, make DW pumps portable and easy to handle.

The semi-open type impeller is made of high-chrome stainless steel (550HB) in order to increase wear resistance. DW.50.08 (only) has a polypropylene motor housing.

Applications
DW pumps are excellent for dewatering and draining jobs. The portable design, wear resistant parts and high pressure capabilities ensure the reliability, sustained performance, user-friendliness and ease of servicing that are necessary in demanding dewatering applications at sites such as:

Construction sites
Excavations
Tunnels
Steel works
Fish ponds
Underground parking drainage Industrial drainage pits

Features and benefits
Durability
Portability
User-friendliness
Ease of servicing High pressure capabilities Control options.

1370Grundfos DMX mechanical diaphragm dosing pump-centro

Grundfos DMX mechanical diaphragm dosing pump

Grundfos DMX mechanical diaphragm dosing pump has proven its worth in dosing applications worldwide. With their robust diaphragm-based design and their high-quality motors DMX pumps require minimum maintenance and are best choice for many dosing applications. The DMX range is highly versatile: it covers a wide flow range and offers a variety of dosing head sizes, materials and accessories.

Accurate dosing – all the time
The diaphragm design ensures that the dosing flow variation is below ± 1.5 % and the linearity deviation is kept below 4 % at all times. This allows very precise dosing of your chemicals – as much as necessary, as little as possible.

Smooth and low-pulsation dosing
The DMX series combines sophisticated drive technolo­gy and gear kinematics to ensure smooth and low-pulsation dosing without pressure peaks. This means less stress to all system components, such as tubes and valves, and leads to longer service intervals for the entire system.

Motors to match application needs
For applications with specific motor requirements, the versatile DMX range offers high-quality motors for 50 Hz, 60 Hz, 100 Hz (with Variable Frequency Drive VFD), as well as EX classified or ATEX-certified motors, if required.

Perfect material selection – for housing and liquid-wetted parts
The smaller DMX models have plastic housings offering chemical resistance and all the protec­tion necessary for many applications. The larger models have a robust cast-aluminium housing with epoxy coating to meet all application needs. Investment costs and running costs for spare parts are kept low over the years: A wide choice of materials for dosing head, valves and accessories allow selecting exactly the degree of chemical resistance required. All liquid-wetted parts need to be resistant to the chemicals used. The diaphragm is made of NBR and PTFE-coated.

Compact design – saves money and space
DMX pumps are available in 12 different dosing head sizes. Careful design work has kept them all very compact. This saves material costs and allows placing several pumps right next to each other in confined spaces. Double-head versions (DMX models 226 and 227) offer a very cost-efficient way to save space or to dose two different chemicals. The extra capacity offered by double-head versions can also be used to gain higher flow rates for a single chemical.

Applications
Disinfection, coagulation, flocculation, precipitation, etc. in:

Drinking water treatment
Waste water treatment
Pulp and paper industry
Textile industry
Cleaning water treatment
Food & Beverage industry, dairies
Cooling tower water treatment
Low-pressure boiler feed water treatment

 

Grundfos CR vertical multistage centrifugal inline pumps-centro

Grundfos CR vertical multistage centrifugal inline pumps

Grundfos CR vertical multistage centrifugal inline pumps family works for water supply, water treatment and almost any industrial solution – including those for high-pressure, hot, dangerous, flammable and aggressive liquids.

Now, the range has been upgraded with a new, more robust generation of CR pumps (CR 95, CR 125 and CR 155), offering an optimised hydraulic design for world-class energy efficiency.

Thanks to a small footprint, the pumps are also easier and less costly to install than comparable pumps. The new CR pumps have been developed using simulation-driven design to perfect every single component and have been field-tested around the world, so you can install and operate the range with total confidence. For more information on the new generation of CR pumps.

The CR is available in millions of different configurations through four modules:

Motors
Shaft seals
Pump modules
Connections.

We offer a “mix and match” modular approach. In Grundfos Product Center
(GPC) we offer a large variety of CR pumps. Further, you can utilise the
configurator to customize the solution to your specific application.

We offer a “mix and match” modular approach, so you can configure a pump that meets your exact needs. We test, qualify and document all modules, just like we do for any standard Grundfos pump.

The basic CR pump range is available in four different materials: cast iron, two grades of stainless steel and titanium. Thirteen flow sizes are capable of producing up to 180 m3/h at 50 bar, with a variety of shaft seals, rubber materials and supply voltages.

We optimise pump parts that are typically vulnerable to difficult liquids or demanding operating conditions.

We also offer highly efficient “E” version pumps with a built-in frequency converter (CRE) or pumps with an external frequency converter (CUE). These combine the very best of pump technology with highly efficient motors and variable speed drives. You will never use more energy than you need.

Bonfiglioli Mechanical Variable Speed Drives-centro

Bonfiglioli Mechanical Variable Speed Drives

Max. to Min. Speed Setting

5.2 times
∞ Reduction through a differential unit

Mechanical Rating (n1 = 1400 min-1)

0,18 kW … 9,2 kW

Additional Helical Reduction

iN = 2,5 … 6,3

Grundfos CMV close-coupled vertical multistage pump-centro

Grundfos CMV close-coupled vertical multistage pump

Grundfos CMV close-coupled vertical multistage pump has been developed with compactness and modularity as two of its central features, enabling numerous customised solutions. The pump basically consists of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter the application.

The pumps are of the close-coupled type, with a mechanical shaft seal.

The CMV pumps are available with cast-iron base and discharge part whereas the remaining wetted parts are made of stainless steel (AISI 304/DIN 1.4301).

Applications
While each Grundfos CMV pump can be customised to meet individual requirements, the pump family is designed to be used in a wide variety of applications.

These include

Pressure-boosting systems
Domestic water supply systems
Cooling systems
Air-conditioning systems
Horticultural irrigation systems
Small industrial applications.

Features and benefits
Compact design
Modular design/customised solutions
High reliability
Low noise level
High-performance hydraulics
Grundfos motor

Grundfos ALPHA2 circulator pump-centro

Grundfos ALPHA2 circulator pump

Grundfos ALPHA2 circulator pump is the best pump to withstand the tough conditions in a heating system, and with four newly added features, it just got even tougher.

Robust start-up:
Shakes free any impurities before the pump starts at the beginning of the heating season.

Summer mode:
Adjustment of the pump’s performance in the summer to the warmer temperature outside, giving customers extra energy efficiency

Magnetite resistance:
Ensures that no small pieces of metal get stuck in the pump’s vital parts when they are magnetised

Dry-running protection:
Makes sure the pump never runs without liquid in the system

Add to that unrivalled energy efficiency, easy installation and the fact that Grundfos ALPHA2 covers both your heating demands and up to 90 % of your air-conditioning and cooling demands.

The GRUNDFOS ALPHA2 is suitable for:

Systems with constant or varying flow
One pipe systems
Two pipe systems
Underfloor-heating
Domestic hot-water recirculation
Systems where night setback is required.

Features and benefits
Better performance with market leading efficiency (EEI≤0.15) in a more compact design
New flow meter for trouble-shooting and balancing
AUTOADAPT selects best performance curve for efficiency and comfort
Innovative plug simplifies pump connection
Insulation shells included.

Grundfos UPS2 circulator pump-centro

Grundfos UPS2 circulator pump

Grundfos UPS2 circulator pump is the perfect replacement option to optimize efficiency in domestic heating systems. The UPS2 is fitted with the most modern motor technology, and with an EEI value ≤ 0.23 the pump is designed to meet the efficiency demands of the 2015 EuP directive.

Design benefits which make UPS2 the ideal replacement pump:

  • Direct backward compatibility
  • Compact pump head
  • Integrated cable plug in control box
  • Performance adjustment in terms of three different speed settings
  • Three Proportional Pressure curves
  • Simple interface

Grundfos UPS2 pump is specifically designed to fulfil performance and dimensional demands in connection with replacement of older UPS pumps.

The UPS2 is available as a pump head only. A solution to be fitted on an already installed UPS-pump housing. This solution is offered to replace all UPS pump types.

Grundfos UPM3 SOLAR OEM circulator pump-centro

Grundfos UPM3 SOLAR OEM circulator pump

Grundfos UPM3 SOLAR OEM circulator pump is an OEM high efficient circulator offering flexible solutions for thermal solar systems. It is designed to work both with and without PWM signal, allowing you to upgrade your systems without having to change the controller.

With PWM Signal:
Externally speed controlled
Choice of one of 4 PWM SOLAR Profile C curves

Without PWM Signal:
Externally speed controlled
Using the Mini Superseal signal cable connection
Configured via user interface or pre-set in Grundfos factory

Characteristic Features
  • High Efficiency circulator for integration in HVAC SOLAR systems; EEI ≤ 0.20 EN16297/3
  • Smallest design ever for a circulator; smaller than the well-known UPS circulator
  • Integrated OEM high efficient circulator with one specific external control mode
  • Active or passive inrush current limitation
  • Ambient temperatures of up to 70 °C.
Bonfiglioli Gear Motors For Hostile Environments-centro

Bonfiglioli Gear Motors For Hostile Environments

Applications

Food processing, chemical, and pharmaceutical industry
Marine on-board and quayside installation
Corrosive and/or highly hygienic environments

Availability on

Gears: VF 44, VF 49, W 63, W 75, W 86
Motors: BN 63 … BN 112 / M1SD … M3LC

Grundfos UPM3 FLEX AS OEM circulator pump-centro

Grundfos UPM3 FLEX AS OEM circulator pump

Grundfos UPM3 FLEX AS OEM circulator pump is a flexible solution for boiler systems now and in the future. It is designed to work both with and without PWM signal, allowing you to upgrade your systems without having to change the circulators.

Characteristic Features

  • Glandless High Efficiency circulator for integration in HVAC systems; EEI ≤ 0.20 EN16297/3
  • Smallest design ever for a circulator; smaller than the well-known UPS circulator
  • Externally controlled signal with standard PWM profile A for 4 MAX
  • Available with many standard and customized housings
  • Active or passive inrush current limitation
  • Ambient temperatures of up to 70 °C.

Benefits
Lowest space requirements ever for a circulator integrated in an appliance
Optimised design fit for easy accessibility
Easy access to the user interface from front
Easy access to the connectors from front
Easy access to the pump head screws from the front
Easy access to the de-blocking screw from front
Intelligent configuration
5 control modes, 18 curves, PLUS 2 AUTOADAPT proportional and constant pressure
Different signals and profiles available (PWM A, PWM C, KMBus)
Standard return signal showing power consumption, alarm and operation status
Other customized input profiles and different return profiles are possible e.g. flow estimation
Ready for Conversion according Ecodesign requirement for August, 2015 exceeding benchmark level; EEI ≤ 0.20 EN16297/3
Unmatched reliability
Field and lab tested product quality
Ceramic bearing shaft – The UPM3 comes equipped with ceramic bearing shafts for a long and trouble-free lifetime. The ceramic material is extremely durable and will not wear.
Double de-blocking system – Electronic de-blocking that maintains the maximum starting torque up to 25 Ncm and manual de-blocking accessible from the front without demounting the control box.
High temperature resilience – The resilience to heat will enhance the possibilities of system integration enormously. Ambient temperatures of up to 70 °C.

Grundfos Unilift CC submersible drainage pump

Grundfos Unilift CC submersible drainage pump

La pompa di drenaggio sommergibile Grundfos Unilift CC è una pompa di drenaggio sommergibile monostadio, progettata per il pompaggio di acque di scarico e acque reflue grigie. Unilift CC ha ora l’opzione doppia presa che rende l’installazione più flessibile e la sostituzione ancora più semplice di prima. Connetti verticalmente o orizzontalmente, come preferisci.

Unilift CC può pompare fino a un livello di acqua di 3 mm sopra il pavimento quando si rimuove il filtro. Unilift CC è adatto sia per installazioni permanenti che temporanee. È dotato di una valvola di non ritorno nella presa per impedire il riflusso dal sistema di tubazioni. Un adattatore assicura buoni collegamenti con prese da ¾ “, 1” o 1 ¼ “.

La gamma Unilift CC comprende tre pompe sommergibili monostadio: CC 5, CC 7 e CC 9. Le pompe sono ugualmente adatte per l’uso portatile e l’installazione permanente.

Il filtro è realizzato in acciaio inossidabile, mentre le parti della pompa principale, ad es. il manicotto e l’alloggiamento della pompa, sono realizzati in materiali compositi stampati.

Il Multibox è la soluzione perfetta da utilizzare come kit di emergenza per case unifamiliari in caso di allagamento. Contiene

Unilift CC-7 con accoppiamento Storz
Tubo in tessuto Storz da 15 m
Scatola con i lati della maglia perforata come pre-filtro per la pompa

applicazioni
Le pompe sono progettate per il pompaggio di acqua piovana o acque reflue grigie da:

Lavatrici, vasche da bagno, docce, lavandini, ecc.
Cantine o edifici inclini alle inondazioni
Scolare i pozzi
Raccolta di pozzi per acque superficiali con prese da grondaie, gallerie, ecc.
Piscine, stagni o fontane
Le pompe Unilift CC sono adatte per i seguenti liquidi:

Acqua pulita e non aggressiva
Acque reflue (grigie) leggermente sporche
Versione EN 1.4401 disponibile per liquidi leggermente aggressivi

Caratteristiche e vantaggi
Presa orizzontale o verticale per una facile installazione o sostituzione
Adatto a bassi livelli di aspirazione fino a 3 mm
Leggera
Versione EN 1.4401 disponibile per liquidi leggermente aggressivi
Filtro in acciaio inossidabile
Materiali compositi

Extruder Gearboxes

Extruder Gearboxes

Mechanical rating

5…1090 kW

Gear Ratios

7.1…125

Main gearbox options

Auxiliary thermal aid device (cooling coil, oil to water heat exchanger)
Fluorelastomer compound oil seals on I/O shaft
Oil temeperature and level sensors

Grundfos TP-TPE inline circulator pump

Grundfos TP-TPE inline circulator pump

Grundfos TP-TPE inline circulator pumps are used in a variety of applications. The pumps are all single-stage, in-line centrifugal volute pumps with standard motors and mechanical shaft seals. The pumps are of the close-coupled type, i.e. pump and motor are separate units. Consequently, the pumps are less sensitive to impurities in the pumped liquid than similar pumps of the canned rotor type.

Two different models of vertical in-line volute pumps are available. Please note that there are a number of specific product variants available for each model. Detailed information on these variants can be found in Grundfos Product Center.

TP pump
This pump model is notable for its high levels of reliability and efficiency.  Quiet, highly-efficient IE3 motors are standard components. All TP pumps are electro-coated to ensure high corrosion resistance.

TPE pump
The main difference between TP and TPE pumps is the motor. TPE motors have a built-in frequency converter, allowing different control methods to be employed. TPE pumps offer benefits with respect to energy savings and increased comfort.

Applications
These vertical in-line volute pumps are used in commercial buildings for air conditioning and heating applications.

The pumps are all single-stage, in-line centrifugal volute pumps with standard motors and mechanical shaft seals. The pumps are of the close-coupled type, i.e. pump and motor are separate units. Consequently, the pumps are less sensitive to impurities in the pumped liquid than similar pumps of the canned rotor type.

Features and benefits
Optimised hydraulics for high efficiency
Reduced power consumption
High-efficiency motors
TP pumps are fitted with high-efficiency motors
High-efficiency motors provide reduced energy consumption
2-pole and 4-pole TP pumps from 0.75 kW to 375 kW have IE3 motors (By March 2012)
Top-pull-out design
Easy dismantling for service
In-line design
Unlike end-suction pumps, in-line pumps allow the use of straight pipework, which often results in reductions in installation cost and amount of space occupied
Hydraulically and mechanically balanced impeller (Series 300 and 400)
The impeller is hydraulically and mechanically balanced to increase the life of motor bearings and shaft seals
Pump housing and pump head/motor stool are electro-coated
Improved corrosion resistance
TPE, TPED – pumps with built-in frequency converter
Reduced power consumption
TPE and TPED motors are based on IE3 motors (except 18.5, 4-pole).

Atex Gearboxes

Atex Gearboxes

Coaxials series C

C11 … C61

Bevel helicals series A

A10 … A60

Shaft mounts series F

F10 … F60

Worm gears series VF and W

VF30 … VF49 W63 … W110

Planetaries series 300

300 … 321

Grundfos SL submersible wastewater pump

Grundfos SL submersible wastewater pump

Grundfos SL submersible wastewater pump range has been developed to optimise performance in your system, minimising known risk factors and reducing maintenance requirements. Remarkably durable, the SL range offers long lasting, service-friendly submersible wastewater pumping.

The highest standards of motor efficiency ensure substantial energy and cost savings. Motors are based on high-efficiency components, improving motor efficiency and prolonging pump life.

The pumps are available with SuperVortex impellers (SLV) for applications with required low operating hours, dry matter content up to 5 %, and a spherical free passage up to 100 mm, or with the S-tube impeller (SL1) for applications with required high operating hours, dry matter content up to 3 %, and a spherical free passage up to 100 mm.

The S-tube impeller is the only impeller on the market designed to cope with the challenges of modern wastewater with varying dry matter content. The simple and robust design of the S-tube impeller offers world class hydraulic efficiency without compromising free passage.

Applications
The SL pump is designed for the transfer of drainage and surface water, domestic, municipal and industrial wastewater, and process water.

The SL pump is also available in an explosion-proof (Ex) version. SL pumps are available in variants with a stainless steel impeller for aggressive environments.

Features and benefits
High motor efficiency ensure substantial energy and cost savings.
Intelligent adaptive controls ensure reliable operation with low energy consumption.
Integrated analogue sensors offer complete monitoring of pump condition.
Lifting handle designed for optimum point-of-balance and correct lifting.
Smooth, easy to clean surface is extremely robust and impact-resistant.
One cable to the pump, simplifying pump installation, commissioning and maintenance.
Moisture-proof connector plug ensures that liquid cannot penetrate into the motor.
Patented SmartSeal auto-coupling gasket provides a completely leak-proof connection.
Easy-to-open clamp for the quick and easy disassembly of pump from motor unit.
Double mechanical shaft seal ensures longer operation time with less downtime.
Short rotor shaft reduces vibrations to protect shaft seals and bearings.
Choice of SuperVortex or S-tube impeller.
Replaceable wear ring to return the pump to full efficiency.

Grundfos SE drainage, effluent and sewage pumps

Grundfos SE drainage, effluent and sewage pumps

The range of Grundfos SE drainage, effluent and sewage pumps is built for years of trouble-free operation. The SE range can operate submerged or dry-installed without motor cooling, and is extremely reliable and very easy to service. The pumps can be permanently installed using an auto-coupling guide-rail system or a fixed pipe connection; the pumps are also suitable for freestanding installation or for use as portable utility pumps.

The pumps are available with SuperVortex impellers (SEV) for applications with required low operating hours, dry matter content up to 5 %, and a spherical free passage up to 100 mm, or with the S-tube impeller (SE1) for applications with required high operating hours, dry matter content up to 3 %, and a spherical free passage up to 100 mm.
The S-tube impeller is the only impeller on the market designed to cope with the challenges of modern wastewater with varying dry matter content. The simple and robust design of the S-tube impeller offers world class hydraulic efficiency without compromising free passage.

Applications
The SE range of pumps handles wastewater, process water and unscreened raw sewage in heavy-duty municipal, utility and industrial applications and is ideal for large flows.

A number of material variants are available for SE pumps, from variants with a stainless steel impeller to stainless steel variants for aggressive environments, meeting the standards EN 1.4408 and EN 1.4517/1.4539.

Features and benefits
High motor efficiency for substantial energy and cost savings.
Intelligent adaptive controls ensure reliable operation with low energy consumption.
Integrated analogue sensors offer complete monitoring of pump condition.
Lifting handle designed for optimum point-of-balance and correct lifting.
Smooth, easy-to-clean surface is extremely robust and impact-resistant.
One cable to the pump, simplifying pump installation, commissioning and maintenance.
Moisture-proof connector plug ensures that liquid cannot penetrate into the motor.
Patented SmartSeal auto-coupling gasket provides a completely leak-proof connection.
Easy-to-open clamp for the quick and easy disassembly of pump from motor unit.
Double mechanical shaft seal ensures longer operation time with less downtime.
Short rotor shaft reduces vibrations to protect shaft seals and bearings.
Liquidless motor cooling for continuous operation, even in dry installations.
Choice of SuperVortex or S-tube impeller.
Replaceable wear ring to return the pump to full efficiency

Grundfos NK end-suction long-coupled pumps

Grundfos NK end-suction long-coupled pumps

Grundfos NK end-suction long-coupled pumps are used in water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), irrigation and process industries.
Grundfos end-suction pumps are multi-purpose pumps suitable for a variety of different applications requiring reliable and cost-efficient supply. End-suction pumps are used in five main areas of application: water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), and irrigation.

The pumps are all non-self-priming, single-stage, centrifugal volute pumps with axial suction port, radial discharge port and horizontal shaft. The Grundfos NK/NKG range comprises a complete series of long-coupled pumps that comply fully with either EN733 or ISO2858. The pumps are of the back pull-out design, enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. Even the largest pumps can thus be serviced by one person with a crane.

The ISO2858 range of pumps are available with a bearing life of 100,000 hours, and can be fitted with double seals. They available in a stainless steel version as an option.

Applications
Grundfos offers a virtually limitless range of long-coupled (NK) end-suction pumps. Their sturdiness and reliability make them ideal for use in demanding environments such as the following:

District heating plants
Heating systems for blocks of flats
Air-conditioning systems
Cooling systems
Wash down systems
Other industrial systems.

Features and benefits
Optimised hydraulics in housing and impeller = unimpeded liquid flow
O-ring seal between pump housing and cover = no risk of leakage
Housing, impeller and wear ring in different materials = improved corrosion resistance, no sticking elements
Back pull-out design for easy dismantling for service
Pump is electro-coated to increase corrosion resistance
Available with IE1, IE2 and IE3 motors
PN 10/16 and 25 bar
Temperatures up to 180 °C
Available in a number of shaft seal and material variants.

Combined Gearboxes-centro

Combined Gearboxes

Product range

Numerous combinations cover a wide range of applications and offer:

  •  Gear ratios from 1:100 to 1:1000
  •  Rated power up to 980 kW
  •  Reference torque up to 1200 kNm
Special solutions

Special, complete and custom power transmission solutions are available for specific applications involving:

  • Torque arms
  •  Base plates
  •  Fluid couplings
  •  Shoe brakes
  •  Other accessories (paint coatings, special seals, motor flanges with integrated fans, etc.)
Grundfos MAGNA3 circulator pump

Grundfos MAGNA3 circulator pump

Grundfos MAGNA3 circulator pump make up a broad range of small, medium and large circulator pumps – all fitted with communication equipment and state-of-the-art motors. These high performance pumps are perfect for high performance building systems, and fit both heating and cooling applications.

MAGNA3 knows the perfect setting
With a MAGNA3, you can stop worrying about complicated pump settings. Simply install the pump and leave it on the factory setting called AUTOADAPT. The MAGNA3 will now automatically analyse the heating system, find the optimum setting and then continuously adjust its operation to changes in demand. The result is optimum comfort and minimum energy consumption.

MORE BENEFITS
MAGNA3 pumps are extremely flexible and reliable, and have low noise levels, long life and no maintenance requirements. They are fitted with IR communication and can offer external control and monitoring via expansion modules.

Applications
The Grundfos MAGNA3 circulator pumps are designed for circulating liquids in the following systems:

Heating systems
Air-conditioning and cooling systems
Domestic hot-water systems.

The pump range can also be used in the following systems:
Ground source heat pump systems
Solar-heating systems.

Grundfos JP self-priming single stage centrifugal pump-centro

Grundfos JP self-priming single stage centrifugal pump

Grundfos JP self-priming single stage centrifugal pump is a self-priming, single-stage centrifugal pump with axial suction port and radial discharge port. The pump has a built-in ejector with guide vanes for optimum self-priming properties. JP pumps are available in two material variants.

Material variant A: Cover plate, motor stool and base plate in one unit. The handle is fitted crosswise. Both elements are made of composite material.

Material variant B: Stainless steel cover plate, aluminium motor stool and stainless steel base plate, all separate parts.

Applications
Built for a long, trouble-free working life, the small and handy Grundfos JP pump is suitable for a wide variety of water supply and transfer duties in home, garden and hobby applications as well as in agriculture, horticulture and small-scale service industries.
When used in combination with a pressure control or tank, the JP pump is ideal for small water supply systems.

Features and benefits
Self-priming
Stable operation even if there is air in the liquid
Robust design that makes the pump suitable for fixed installation
The pump is directly coupled to a special fan-cooled asynchronous Grundfos motor that is adapted to the pump performance
Single-phase motors have a built-in thermal switch and require no additional motor protection
Three-phase motors require external motor protection.

Grundfos EF effluent pump-centro

Grundfos EF effluent pump

Grundfos EF effluent pump is designed for pumping wastewater (excluding toilet waste) from private dwellings. They are also suitable for pumping liquid manure from farms, and for a variety of industrial applications.

The EF pumps are designed for free-standing, hook-up or auto-coupling installation. The pumps are fitted with an integrated three-legged stand. They are capable of handling liquids containing solids of up to 30 mm in size

he Grundfos EF pumps are fitted with an open single-vane impeller with excellent solids-handling capabilities.

Impeller clearance can be adjusted by tightening or loosening the adjustment screws at the bottom of the suction cover. Adjustment can be carried out without dismantling the pump.

Applications

The pumps are suitable for:

  • Drainage
  • Effluent
  • Wastewater not containing discharge from toilets.

Features and benefits
Cable plug connection
Unique clamp connection
Specially designed lifting handle
Unique cartridge shaft seal
Modular design
Heavy-duty ball bearings
Short rotor shaft.

Planetary Gear Motors 300 Series-centro

Planetary Gear Motors 300 Series

Torque range

1000 … 1287000 Nm

Mechanical rating (n1 = 1500 min-1)

up to 450 kW

Gear ratios

3.4 … 5234

Gear unit versions

In line
Right angle (with Gleason bevel gear set)

Grundfos DPK submersible pump-centro

Grundfos DPK submersible pump

Grundfos DPK submersible pump is designed for dewatering and drainage applications. The cast-iron construction and the hydraulic design contribute durability and high efficiency. The differences between the DWK and DPK pump ranges lie in the discharge arrangement and the installation type.

The DWK is designed with a top discharge pipe and suction strainer, and is thus more suitable for temporary installation, whereas the DPK has a side discharge and a ring-stand or auto coupling (as accessories), and is suitable for permanent installations.

Applications
DWK/DPK are excellent pumps for dewatering and draining applications. The combination of compact design with high-pressure capability makes the pumps suitable for use in pits, whether for temporary or fixed installation. The installation design options provide the flexibility needed to cover many needs.

Construction sites
Excavations
Tunnels
Fish ponds
Drainage pits.

Features and benefits
Durability
High efficiency
Installation flexibility
High-pressure capabilities, cost-effectiveness.

Grundfos DMH hydraulic piston diaphragm dosing pump-centro

Grundfos DMH hydraulic piston diaphragm dosing pump

Grundfos DMH hydraulic piston diaphragm dosing pump is a series of extremely strong, robust pumps for applications requiring a reliable dosing and high-pressure capability, such as process engineering. The DMH 28x has been especially designed for high-pressure applications from 50 up to 200 bar. The range is highly versatile: it covers a wide flow range and offers a variety of dosing head sizes, materials and accessories. Customers worldwide have enjoyed years of trouble-free operation from their DMH pumps.

Accurate dosing – all the time
DMH pumps have a very high dosing accuracy and allow an exact reproducibility. For DMH25x, the dosing flow fluctuation is <± 1.5 % within the 10-100 % control range, and the linearity deviation is ± 2 % of the full-scale value. For DMH28x, the dosing flow fluctuation is <± 1.0 % within the 10-100 % control range, and the linearity deviation is ± 1 % of the full-scale value.

Smooth and low-pulsation dosing
The DMH range combines sophisticated drive technolo­gy and gear kinematics to ensure smooth and low-pulsation dosing without pressure peaks. This means less stress to all system components, such as tubes and valves, and leads to longer service intervals for the entire system.

Motors to match application needs
For applications with specific motor requirements, the versatile DMH range offers high-quality motors for 50 Hz, 60 Hz, 100 Hz (with Variable Frequency Drive VFD), as well as EX classified or ATEX-certified motors, if required.

Grundfos Conlift condensate removal pump-centro

Grundfos Conlift condensate removal pump

Grundfos Conlift condensate removal pump is a professional range of reliable, quiet and compact condensate removal pumps. These products are used where condensate cannot drain naturally or when the condensate source is located below the backwater level.

The design of CONLIFT includes many unique, patented features which make the product design very robust, particularly when dealing with aggressive condensate for example from condensing boilers. Once installed, the units operate automatically.

Installation is simplified by the inclusion of a 6m drain hose as well as the connection adaptors needed making installation simple. The smart balance system and the motor/pump unit ensure the unit can be adjusted to meet specific installation needs.

The range consists of 3 variant:

CONLIFT1, the basic version, includes a wired alarm contact which can be used to activate an external alarm device or to switch-off the condensate source in case of high water level inside the unit.
CONLIFT 2, the advanced version, comes with the same functionality as CONLIFT1 but incorporates also an integrated alarm that gives an acoustic signal in case of high water conditions.
CONLIFT2 pH+ comes with the functionality of CONLIFT2 plus a flexible neutralisation unit for particularly aggressive condensate from oil condensing or larger gas boilers to protect the building and the sewer system.

Thanks to the modular system, CONLIFT1 and CONLIFT2 can be upgraded with either an alarm PCB and/or neutralisation unit which can be retrofitted in case changing conditions require this flexibility.

Applications
The typical application is the removal of condensate from condensing boilers, chimneys, air-conditioning, dehumidifiers and refrigerators.
Features and benefits
Very quiet and reliable operation
Maintenance free motor including thermal protection
Reduced number of starts
Up to four inlet connections
All installation material included
Suitable for pH values greater 2,5 by neutralisation
IP24 splash guard
Manual test button to check operation
Special shaft seal protection
Mounted non-return valve with bayonet lock for quick release
Upgradability through modular design
Unit with pH tester to monitor neutralisation capacity

Grundfos CM close-coupled horizontal multistage pump-centro

Grundfos CM close-coupled horizontal multistage pump

Grundfos CM close-coupled horizontal multistage pump (=Centrifugal Modular) has been created with compactness and modularity as two of its central features, making numerous configurations possible. The pump is basically composed of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter what the application.

The pumps are of the close-coupled type.

The difference between the CM and the CME pump ranges is the motor. CM pumps are fitted with mains-operated motors, whereas the motors for CME pumps have an integrated frequency converter.

Both CM and CME pumps have mechanical shaft seals.

The CM and CME pumps are available in cast iron or stainless steel (AISI 304/DIN 1.4301 stainless steel, which is for water and non-corrosive liquids, and AISI 316/DIN 1.4401 stainless steel, which offers a high degree of corrosion protection against aggressive liquids).

Applications
The CM or CME pump is a multi purpose pump for both industry and water boosting in general.

It is compact, noiseless, reliable and flexible, and this make it an optimal solution for installation and interaction with other components in small and large systems or as a stand-alone pump.

Features and benefit
Compact design
Modular construction/customised solutions
Worldwide usage
High reliability
Service-friendly
Wide performance range
Low noise level
High-performance hydraulics
Electro-coated cast-iron parts
Customised solutions
Grundfos motor
E-solutions
High efficiency.

Grundfos ALPHA1 L circulator pump

Grundfos ALPHA1 L circulator pump

Grundfos ALPHA1 L circulator pump is the only upgrade and replacement pump that fits 95 % of boilers equipped with Grundfos pumps.

With its compact design, simple connection to boiler signal cables (PWM), and tolerance for higher ambient temperatures, the ALPHA1 fits seamlessly in the majority of boilers equipped with Grundfos pumps, regardless of the boiler brand. This makes it very easy to replace broken or inefficient pumps without the need for excess spares.

Energy Efficient Performance – Heating, cooling, hot water
Not only is the ALPHA1 a convenient and reliable option to replace broken pumps, it also offers superior energy efficiency- making it the perfect choice for an upgrade. The Grundfos ALPHA1 features a state-of-the-art energy efficient motor that uses less energy to operate than older models, and can result in much lower operating costs.

Benefits

  • Fits 95 % of boilers equipped with Grundfos pumps
  • State-of-the-art energy efficient motor for energy and cost savings
  • Reliable performance and long pump lifetime
  • Quiet operation, low running noise levels of 42-43dB(A)

The ALPHA1 is suitable for running in:
Boilers
Underfloor heating installations
Mixing units and boiler kits
Domestic hot water systems
Biomass heating

 

Grundfos UPS circulator pump

Grundfos UPS circulator pump

Grundfos UPS circulator pump constitute a complete range of 3-speed circulator pumps, available both in 50 and 60 Hz.

The pumps can be used in both open and closed systems. UPS pumps are of the canned-rotor type, i.e. pump and motor form an integral unit without a shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. UPS pumps are designed for circulation of liquids in heating and air-conditioning systems. Pumps with bronze or stainless steel housings are also suitable for use in hot-water service systems.

Examples of typical applications are:

One- and two-pipe heating systems
Main pumps
Zone pumps
Boiler shunt pumps
Pumps for heating surfaces
Calorifiers
Underfloor heating systems
Solar heating systems
Heat pump systems
Geothermal heating systems
Heat recovery systems
Two-pipe air-conditioning systems
Pumps for refrigeration units.

Features and benefits
Maintenance-free
Low noise
Low energy
Complete range
Available with corrosion-resistant stainless steel or bronze pump housing
Wide range of accessories.

Grundfos UPM3 OEM circulator pump

Grundfos UPM3 OEM circulator pump

Grundfos UPM3 OEM circulator pump is the right choice for all HVAC projects and appliances produced on a big scale where only one specific external control mode with one specific speed range is requested. UPM3 is controlled via a signal cable entry.

Characteristic Features
  • Glandless High Efficiency circulator for integration in HVAC systems; EEI ≤ 0.20 EN16297/3
  • Smallest design ever for a circulator; smaller than the well-known UPS circulator
  • Integrated OEM high efficient circulator with one specific external control mode
  • Available with many standard and customized housings
  • Active or passive inrush current limitation
  • Ambient temperatures of up to 70 °C.

Benefits
Lowest space requirements ever for a circulator integrated in an appliance
Optimised design fit for easy accessibility
Easy access to the user interface from front
Easy access to the connectors from front
Easy access to the pump head screws from the front
Easy access to the de-blocking screw from front
Intelligent configuration
Different signals and profiles available (PWM A, PWM C, KMBus)
Standard return signal showing power consumption, alarm and operation status
Other customized input profiles and different return profiles are possible e.g. flow estimation
Ready for Conversion according Ecodesign requirement for August, 2015 exceeding benchmark level; EEI ≤ 0.20 EN16297/3
Unmatched reliability
Field and lab tested product quality
Ceramic bearing shaft – The UPM3 comes equipped with ceramic bearing shafts for a long and trouble-free lifetime. The ceramic material is extremely durable and will not wear.
Double de-blocking system – Electronic de-blocking that maintains the maximum starting torque up to 25 Ncm and manual de-blocking accessible from the front without demounting the control box.
High temperature resilience – The resilience to heat will enhance the possibilities of system integration enormously. Ambient temperatures of up to 70 °C.

Grundfos UPM3 AUTO OEM circulator pump

Grundfos UPM3 AUTO OEM circulator pump

Grundfos UPM3 AUTO OEM circulator pump is for all applications in which an internally controlled pump is needed. It is designed to be used in appliances or cabinets with increased ambient temperatures and limited space options; either in standalone applications or in kit systems without PWM controller.

Standalone OEM high efficiency circulator
For standalone applications
Optimal for floorheating with a high valve authority
Flexibility of settings benefits the OEM production and the installation in the field

nternally controlled circulators

3 control modes
10 Curves
PLUS AUTOADAPT proportional and constant pressure
Substitutes ALPHA2 pumps

Characteristic Features
Glandless High Efficiency circulator for integration in HVAC systems; EEI ≤ 0.20 EN16297/3
Smallest design ever for a circulator; smaller than the well-known UPS circulator
Internally controlled circulator
Available with many standard and customized housings
Active or passive inrush current limitation
Ambient temperatures of up to 70 °C.

Benefits
Lowest space requirements ever for a circulator integrated in an appliance
Optimised design fit for easy accessibility
Easy access to the user interface from front
Easy access to the connectors from front
Easy access to the pump head screws from the front
Easy access to the de-blocking screw from front
Intelligent configuration
5 control modes, 18 curves, PLUS 2 AUTOADAPT proportional and constant pressure
Different signals and profiles available (PWM A, PWM C, KMBus)
Standard return signal showing power consumption, alarm and operation status
Other customized input profiles and different return profiles are possible e.g. flow estimation
Ready for Conversion according Ecodesign requirement for August, 2015 exceeding benchmark level; EEI ≤ 0.20 EN16297/3
Unmatched reliability
Field and lab tested product quality
Ceramic bearing shaft – The UPM3 comes equipped with ceramic bearing shafts for a long and trouble-free lifetime. The ceramic material is extremely durable and will not wear.
Double de-blocking system – Electronic de-blocking that maintains the maximum starting torque up to 25 Ncm and manual de-blocking accessible from the front without demounting the control box.
High temperature resilience – The resilience to heat will enhance the possibilities of system integration enormously. Ambient temperatures of up to 70 °C.

Grundfos Unilift AP submersible drainage pump-centro

Grundfos Unilift AP submersible drainage pump

Grundfos Unilift AP submersible drainage pump is designed for both temporary/portable installation and permanent free-standing installation. These single-stage pumps are made mostly of stainless steel. All types are available in either single phase or three phase versions and for 50 or 60 Hz power supply.

The number in the type designation, e.g. AP12, indicates the spherical particle size that can pass through the pump.

All Unilift AP and AP Basic pumps are fitted with a plug for connection to the mains.

Grundfos Unilift AP is a single stage pump with either semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift AP pumps are fitted with a stainless steel sleeve for cooling during operation. The strainer at the bottom prevents particles larger than the pump is designed for from entering the pump. The strainer is clipped onto the pump housing. All Unilift AP pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. 3-phase versions have an additional starter box connected to the float switch. The outlet is positioned at the top of the pump and is available in Rp 1 1/2 to Rp 2.

An optional non-return flap valve can be fitted in the outlet in order to prevent backflow.

Grundfos Unilift AP Basic pumps are single-stage pumps (AP35B, AP50B) with vortex impeller. All Unilift AP Basic pumps are made of stainless steel, with a composite baseplate. The Unilift AP Basic range is designed for submerged operation, either free-standing on the base plate or installed using an auto coupling. The pump inlet is designed to prevent to large particles from entering the pump. The base plate is clipped on by means of four clips hidden under the composite ring at top of the pump housing. The ring prevents dirt from sticking to the clips. All Unilift AP Basic pumps can be supplied with or without float switch, for automatic or manual operation. Pumps with an ”A” in the type designation are fitted with a float switch. The outlet is positioned at the side of the pump and is R 2.

Applications
Water and rainwater in horticulture
Water from rivers and lakes
Rainwater, drainage water and water from flooding
Water for filling/emptying containers, ponds, tanks, etc.
Effluents from showers, washing machines and sinks below sewer level
Pool water
Ditch drainage water
Groundwater (lowering applications)
Domestic effluents from septic and sludge-treating systems
Liquids containing fibres from light industry, laundries, etc.
Effluents from viaducts, underpasses, etc.
Drainage water from garage sprinkler systems

Features and benefits
Unilift AP is for permanent or temporary free-standing installations. Most components are made of stainless steel. Cable fitted by means of a plug. Available in both automatic and manual versions. Single-phase versions have an integrated thermal switch.

Planetary Gear Motors 300M Series

Planetary Gear Motors 300M Series

Gear ratios

3.4 … 5000

Main gearbox options and versions

In line
Right angle
The integrated and independent cooling system
Taconite seals
Certification for explosive environments

Output

Foot or Flange mounted
Splined shaft (male, heavy duty, hollow, hollow with the axial blockage device)
Solid keyed shaft ( male, heavy duty, stirrer/mixer version)
Hollow shaft with a double keyway or shrink disk

Grundfos SP submersible groundwater pump

Grundfos SP submersible groundwater pump

Grundfos SP submersible groundwater pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SP pumps are ideal for a wide variety of applications.

Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.

The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.

Applications
The pumps are suitable for:

Groundwater supply to waterworks
Irrigation in horticulture and agriculture
Groundwater lowering
Pressure boosting
Industrial applications

Features and benefits
State-of-the-art hydraulics provide high efficiency and low operating costs
100 % stainless steel inside and outside
Sand resistant
Resistant to aggressive water
Motor burnout protection
Dry-running protection
Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.

Universal Worm Gear Motors

Universal Worm Gear Motors

Torque Range

13 Nm… 7.100 Nm

Mechanical Rating (n1= 1400 min-1)

0,04 … 75 kW

Gear ratios

7 … 10000

Output Configurations

Keyed Hollow Shaft
Plug-in Solid Output Shaft
Torque Limiter as an Option

Grundfos SEG grinder pumps-centro

Grundfos SEG grinder pumps

Grundfos SEG grinder pumps are specifically designed for pumping effluent and untreated sewage in small communities or sparsely populated areas with no sewer systems or where gravitation systems are unsuitable.

Pressurised systems are the perfect choice for transfer of effluent and sewage, and the SEG range combines cost-effectiveness with maximum protection for the environment by facilitating the use of smaller pressure pipes for minimal investment costs.

The SEG range is designed to reduce energy consumption and to keep downtime costs to a minimum, while maintaining peak performance throughout the system life.

Applications
The Grundfos SEG pumps are specifically designed for pumping untreated wastewater from domestic, commercial or municipal sources. The high discharge pressure enables transfer of wastewater over longer distances.

Features and benefits
Cable plug connection
Efficient grinder system
SmartTrim impeller adjustment
Unique clamp connection
Specially designed lifting handle
Unique cartridge shaft seal
Modular design
Heavy-duty ball bearings.

Grundfos SCALA2 water booster pump-centro

Grundfos SCALA2 water booster pump

Grundfos SCALA2 water booster pump is a fully integrated water booster pump providing perfect water pressure in all taps at all times – even with multiple taps and showers running at the same time. It packs pump, motor, tank, sensor, drive and non-return valve into one compact unit. And with its intelligent pump control, SCALA2 automatically adjusts performance to both inlet pressure and water consumption in the home. Thanks to a water-cooled motor, SCALA2 even offers one of the lowest noise levels of any booster on the market.

What is intelligent pump control?
SCALA2 features a built-in sensor, which constantly measures the discharge pressure. If the pressure drops below the desired level, SCALA2 boosts its operation immediately to compensate for the loss of pressure. We call it intelligent pump control and the result is perfect water pressure.

Benefits
Perfect water pressure: Intelligent pump control adjusts operation automatically
Low noise: As quiet as a modern dishwasher (47 dB(A) in typical use)
Easy selection: One variant for all domestic boosting needs
Easy installation: Compact, all-in-one solution, plug-and-pump
Easy to operate: User-friendly control panel
Reliable operation: Dry-running protection, anti-cycling
Long lifetime: Quality-tested to perfection, maintenance-free

Applications
SCALA2 is the perfect choice for residential buildings with up to 3 floors and 8 taps.

Boosting from mains: Increases the water pressure delivered by city mains
Boosting from tanks: Increases water pressure from roof tanks, break tanks and ground tanks, including rainwater tanks.
Boosting from wells: Pumps water from a depth of 8 metres
Suitable for both Indoor and outdoor installation X4D and Enclosure type 3(US).

Bevel Gears-centro

Bevel Gears

Torque Range

3 Nm… 3.000 Nm

Mechanical Rating (n1= 1400 min-1)

0.15 kW … 91 kW

Gear ratios

1,0 … 7,4

Shaft Arrangement

Single or Double Shaft Projection

Input

Solid Input Shaft

Bevel Helical Gear Reducers-centro

Bevel Helical Gear Reducers

Gear Ratios

5.6 … 490

Input

Single/Double sided solid input shaft (metric or inch dims)
IEC and Nema motor adapter
Motor adapter with coupling bell and flexible joint

Output

Single/Double sided solid input shaft (metric or inch dims)
Keyed hollow shaft
Shrink disc

Grundfos NB end-suction close-coupled pumps-centro

Grundfos NB end-suction close-coupled pumps

Grundfos NB end-suction close-coupled pumps are used in water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), and irrigation.
Grundfos end-suction pumps are multi-purpose pumps suitable for a variety of different applications requiring reliable and cost-efficient supply. End-suction pumps are used in five main areas of application: water supply, industrial pressure boosting, industrial liquid transfer, HVAC and irrigation.

The Grundfos NB/NBG pumps are all non-self-priming, single-stage, centrifugal volute pumps with axial suction port, radial discharge port and horizontal shaft. The NB/NBG range consists of close-coupled pumps with their main dimensions in accordance with either EN733 or ISO2858.

Applications
Grundfos offers a virtually limitless range of close coupled (NB) end-suction pumps. Their sturdiness and reliability make them ideal for use in demanding environments such as the following:

District heating plants
Heating systems for blocks of flats
Air-conditioning systems
Cooling systems
Wash down systems
Other industrial systems.

Features and benefits
Optimised hydraulics in housing and impeller = unimpeded liquid flow
O-ring seal between pump housing and cover = no risk of leakage
Housing, impeller and wear ring in different materials = improved corrosion resistance, no sticking elements
Pump is CED coated to increase corrosion resistance
Available with IE1, IE2 and IE3 motors
Available in a number of shaft seal and material variants
PN 10,16 and 25 bar
For temperatures up to 140 °C.

Helical Bevel Gear Motors-centro

Helical Bevel Gear Motors

Mechanical rating

0.22 … 150 kW

Gear ratios

5.4 … 1715

Main gearbox options and versions

Backstop
Reinforced bearings for higher overhung load capacity
Reduced backlash
Torque arm
certification for explosive environments

Combined Gearboxes-centro

Combined Gearboxes

Product range:

Numerous combinations cover a wide range of applications and offer:

  • Gear ratios from 1:100 to 1:1000
  •  Rated power up to 980 kW
  •  Reference torque up to 1200 kNm
Special solutions:

Special, complete and custom power transmission solutions are available for specific applications involving:

  • Torque arms
  •  Base plates
  •  Fluid couplings
  •  Shoe brakes
  •  Other accessories (paint coatings, special seals, motor flanges with integrated fans, etc.)
Grundfos MAGNA1 circulator pump-centro

Grundfos MAGNA1 circulator pump

Grundfos MAGNA1 circulator pump model C is a price competitive product designed for circulating liquids in heating systems where simple control and communication is desired. The pump is ideal for larger development projects and is the perfect replacement for UPS pumps in existing systems.

By adjusting the duty point to the actual heat demand, the pump reduces energy costs.

Characteristic features
  • Proportional-pressure control
  • Constant-pressure control
  • Constant-curve/constant-speed duty
  • No external motor protection required
  • No external motor protection required
  • Wide temperature range due to thermal separation of the control box and pump media

Benefits
Fault relay
Digital input (start/stop)
Wireless multipump function with time based alternation
Simple installation
No maintenance and long life
Low noise level
LED indication of control functions
Infrared communication with Grundfos GO for fault message descriptions and simple settings.

The complete range is available for a maximum system pressure of 16 bar (PN 16).

Shaft Mounted Reducers

Shaft Mounted Reducers

Torque Range (n1= 900 min-1)

150 Nm … 16.000 Nm

Mechanical Rating (n1= 900 min-1)

1,1 kW … 156 kW

Gear ratios

5,0 … 31,5

Output

Keyed hollow shaft
Up to three bore options per frame sIze

Single Reduction Helical Gear Motors

Single Reduction Helical Gear Motors

Torque Range

21 Nm… 200 Nm

Mechanical Rating (n1= 1400 min-1)

0,12 … 11,6 kW

Gear ratios

1,4 … 13,1

Output Configuration

Foot and Flange mount

 

Parallel Shaft Gearboxes

Parallel Shaft Gearboxes

Torque Range

5000 … 210000 Nm

Gear ratios

7,1 … 500

Mounting

Foot, flange, shaft mounting

Input

solid shaft, motor adapter

Output

solid (single and double extension), keyed hollow, shrink disc

 

Shaft Mounted Gear Motors

Shaft Mounted Gear Motors

Torque Range

140 Nm… 14.000 Nm

Mechanical Rating (n1= 1400 min-1)

0,17 … 125 kW

Gear ratios

6,4 … 2099

Output Configuration

Keyed Hollow Shaft – Two Bore Options per Size
Keyless Shrink Disc Fitting
Plug-in Solid Output Shafts as an Option

 

Helical Gear Motors

Helical Gear Motors

Torque Range

45 Nm… 12.000 Nm

Mechanical Rating (n1= 1400 min-1)

0,08 kW … 213 kW

Gear ratios

2,6 … 1481

Output Configuration

Foot and Flange mount
Metric or Inch series Solid Output shaft

 

Nordac Start – SK 135E Motor Starter

Nordac Start – SK 135E Motor Starter

The Motor starter NORDAC START is a decentralized wear-free electronic motor starter for soft starting of all kinds. It is equipped with a reversing function and internal motor protection and can, therefore, be flexibly integrated into any system.

Performance:

– 3 / – 7,5 kW

Protection class:

IP55, IP66, IP69K

Wall or motor installation

Nordac Link – SK 155E Motor Starter

Nordac Link – SK 155E Motor Starter

One product, many advantages. The NORDAC LINK motor starter impresses with its high plug-in capability and its easy installation.

Performance:

– 3,00 kW

Protection class:

IP65

Field installation Simple installation and maintenance due to full plug-in capability
Free configuration for your application

Nordac Flex – SK 200E Frequency Inverter

Nordac Flex – SK 200E Frequency Inverter

Flexible to install, easy to service. The NORDAC FLEX is our most flexible inverter that can be tailored to any customer application by means of scalable functions.

Performance:

0,25 – 22 kW

Protection class:

IP55, IP65

Wall or motor installation

Nordac Link – SK 250E Frequency Inverter-centro

Nordac Link – SK 250E Frequency Inverter

Performance:

0,55 – 7,5 kW

Protection class:

IP55, IP65

Field installation
Simple installation and maintenance due to full plug-in capability
Free configuration for your application

Nordac Pro – SK 500E Frequency Inverter-centro

Nordac Pro – SK 500E Frequency Inverter

The NORDIC PRO is the inverter for all drive applications. It offers a wide power range, and its functionality can be extended with plug-in option modules. For this inverter, variable cooling concepts are used to remove heat, which enables removal of heat outside of the control cabinet and can be simply adapted to the requirements of the application with various optional modules.

Performance:

0,25 – 160 kW

Protection class:

IP20

 

Nord MAXXDRIVE Helical Gear Units-centro

Nord MAXXDRIVE Helical Gear Units

Performance:

1,5 – 4.000 kW

Torque range:

15,000 – 250,000 Nm

High strength precision-made one-piece housing

Modular and flexible design for optimum adaptation to your application

Low running noise

Nord MAXXDRIVE Helical Gear Units-centro

Nord MAXXDRIVE Helical-Bevel Gear Units

Performance:

1,5 – 1.500 kW

Torque range:

15.000 – 250.000 Nm

High strength precision-made one-piece housing

Modular and flexible design for optimum adaptation to your application

Low running noise

Nord Smooth Motors-centro

Nord Smooth Motors

NORD smooth motors are produced in our own factories and supplied to all important markets throughout the world. Thanks to their wash-down design the motors are suitable for use in the food industry, among other places.

Performance:

0,12 – 1,1 kW

Global approvals and acceptances

Grundfos HS horizontal split case pumps-centro

Grundfos HS horizontal split case pumps

Grundfos HS horizontal split case pumps is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipework.

The independent bearing housing allows for ease of maintenance without removing the top casing. The double volute design reduces the radial load on the shaft, extending component life, minimising vibration and providing quiet operation.

The HS pump also offers high pump efficiencies throughout the range.  High energy efficiency along with long pump life and easy maintenance add up to low life-cycle costs.

Grundfos HS pump is available in three configurations – pump with motor and baseframe, pump with baseframe, and bare shaft pump only. The HS pump is ideal for custom applications and is available in a wide range of variants. The high efficiency and low life cycle costs make the HS ideal for any commercial building, water utility or industrial project.

Applications
Grundfos HS horizontal split case pumps are typically used in these applications:

Air-conditioning/heating systems
Public water supply
District cooling/heating plants
Cooling systems
Public waterworks
Process cooling
Irrigation.

Features and benefits
Easy to service: split case design
Double suction minimises axial load,which extends the life of the wear rings, shaft seals and bearings
Double volute reduces radial forces and minimises noise and vibration
Independent bearing housing design allows access to the pump components without removing the top half of the casing
High energy efficiency
Low life-cycle costs
Many product variants available.

Grundfos DWK submersible pump-centro

Grundfos DWK submersible pump

Grundfos DWK submersible pump is designed for dewatering and drainage applications. The cast-iron construction and the hydraulic design contribute durability and high efficiency. The differences between the DWK and DPK pump ranges lie in the discharge arrangement and the installation type.

The DWK is designed with a top discharge pipe and suction strainer, and is thus more suitable for temporary installation, whereas the DPK has a side discharge and a ring-stand or auto coupling (as accessories), and is suitable for permanent installations.

Applications
DWK/DPK are excellent pumps for dewatering and draining applications. The combination of compact design with high-pressure capability makes the pumps suitable for use in pits, whether for temporary or fixed installation. The installation design options provide the flexibility needed to cover many needs.

Applications include:
Construction sites
Excavations
Tunnels
Fish ponds
Drainage pits

Features and benefits
Durability
High efficiency
Installation flexibility
High-pressure capabilities, cost-effectiveness

Grundfos DP drainage pump

Grundfos DP drainage pump

Grundfos DP drainage pump is designed for pumping drain water and groundwater from installations in or around private housing, farms and small industrial plants. These pumps are also ideal for flood-relief applications and as utility pumps in farming, industry, etc.

DP pumps are fitted with a suction strainer, on which the pump stands. The suction strainer allows for the passage of solid particles of up to 10 mm in size, which is the maximum free passage size through DP pumps. The strainer is easy to dismantle for cleaning or for inspection of the pump hydraulics.

The impeller for the DP range is of a semi-open multivane design. The impeller clearance can easily be adjusted simply by tightening or loosening the adjustment screws at the bottom of the suction cover.

Pumped liquids

The pumps are suitable for:

Drainage and surface water
Groundwater
Industrial process water without solids or fibres.

Features and benefits
Cable plug connection
Unique clamp connection
Specially designed lifting handle
Unique cartridge shaft seal
Modular design
Heavy-duty ball bearings.

Grundfos DME digital diaphragm dosing pump

Grundfos DME digital diaphragm dosing pump

Grundfos offers a wide range of Grundfos DME digital diaphragm dosing pump representing state-of-the-art technology.

Digital Dosing solutions (SMART Digital, DME, DDI) set new standards in liquid chemical handling and accuracy. The operator can easily install and set up the pump to discharge exactly the quantity of dosing liquid required for the process in a unique drive- and flow-control management concept. The setting of the pump is displayed in ml/h, l/h or gph, and the operation mode is easily identified by means of icons.

The DMH mechanical hydraulic dosing pump range is the preferred choice for industrial and complex tasks. The DMH range is a series of extremely strong, robust pumps for applications where a substantial dosing range and high-pressure capabilities are required.

Applications
The dosing pumps are designed for handling chemicals within the following applications, among others:

Drinking water treatment
Wastewater treatment
Cooling water treatment
Washing systems
Process water treatment
Chemical industry.

Features and benefits
Precise and easy setting
Unique technology
Small number of variants will cover all needs
Full pulse control
Pulse batch control
Internal timer batch control
Analog 0/4-20 mA control
Level control
Fieldbus communication module.

Nord Single Phase Motors

Nord Single Phase Motors

Single phase motors are equipped with starting and/or operating capacitors or are supplied with a Steinmetz circuit as an economic solution for simple requirements.

Performance:

0,12 – 1,5 kW

Efficiency class :

IE1

Global approvals and acceptances

Nord Switchable Pole Motors

Nord Switchable Pole Motors

NORD switchable pole motors enable operation with two or more fixed speeds. Squirrel cage motors with this design provide an economical alternative for applications in which continuous speed control with inverters is not required.

Performance:

0,1 – 17 kW

Efficiency classes:

IE1

Further approvals and acceptances

Nord Standard Motors

Nord Standard Motors

NORD standard asynchronous motors fulfil all common efficiency regulations, are available in all international standards and are available with various options

Performance:

0.12 – 55 kW

Global approvals and acceptances

Efficiency classes:

IE1, IE2, IE3, IE4