Our Products

centro

Oil Seals

  • Oil Seals
  • Packings
  • O-rings
  • Mechanical Seals
  • Lip Seals
Wrapped Belt-Joined V-Belt-Narrow joining

Wrapped Belt-Joined V-Belt-Narrow joining

  • Higher power transmission efficiency
  • Applicable for smaller pulley
  • Space saving
  • Excellent resistance against heat, oil and wear.
  • Prevention from shortening belt lifetime caused by length difference

Measure of section

Pitch(㎜) Height(㎜)
3V Type 10.3 10.5
5V Type 17.5 16.0
8V Type 28.6 24.7
Raw Edge Cogged Belt- Joined V-Belt -Narrow joined-centro

Raw Edge Cogged Belt- Joined V-Belt -Narrow joined

  • Minimizes temporary shock & vibration
  • Prevents popping on the pulley & torsion of belts
  • Maintains uniform tension.
  • Maintains the length stability
  • High power transmission efficiency
  • Space
Wrapped Belt-Joined V-Belt-General joining-centro

Wrapped Belt-Joined V-Belt-General joining

  • The belt prevents abrasion caused by length differences among v-shaped belt used on one pulley, It can adjust the hold based on the need.

Measure of section

Pitch(㎜) Height(㎜)
A Type 15.0 11.5
B Type 19.0 13.5
C Type 25.5 16.5
D Type 37.0 21.
Raw Edge Cogged Belt -Joined V-Belt -Classical joined-centro

Raw Edge Cogged Belt -Joined V-Belt -Classical joined

  • Minimizes temporary shock & vibration
  • Prevents popping on the pulley & torsion of belt
  • Maintains uniform tension.
  • Maintains the length stability

 

Wrapped Belt -Narrow V-Belt-centro

Wrapped Belt -Narrow V-Belt

  • Cover fabrics enhance durability by protecting inner parts.
  • Specially designed cords enhance durability and length stability.
  • Excellent in resistance against heat, oil and wear.
  • Safe use is ensured by preventing static electricity.
  • Enhances power transmission efficiency by reducing slip.
Construction Functions Materials
  • Cover fabric
Protection for the tension member Cotton, Synthetic fabric
  •  Tension member
Primary material for transfer of power Polyester, Aramid
  • Top compression rubber
Maintenance of belt shape(upper) NR, CR
  •  Adhesive rubber
Support and protection of tension member adhesion NR, CR
  •  Bottom compression rubber
Belt shape maintaining(lower) NR, CR
raw-edge-cogged-3v-figure

Raw Edge Cogged Belt – Narrow V-Belt

  • Designed to enhance power transmission efficiency by giving even stress over tension member with a special section all shape of narrower top width and taller height, special raw materials, and production technique.
Construction Functions Materials
  •  Top fabric
Protection for the tension member Cotton, Synthetic fabric
  •  Tension member
Primary material for transferring power Polyester, Aramid
  •  Compression rubber
Sectional shape maintaining by side pressure CR
  •  Bottom rubber
Shock absorption and prevention from compression rubber crack CR
raw-edge-cogged-3v-figure

Raw Edge Cogged Belt – Classical V-Belt

  • Excellent durability and flexibility in driving
  • Specially designed cords enhance durability and length stability
  • Excellent in resistance against heat, oil and wear
  • High power transmission efficiency
  • Can be used on small pulleys
  • Show stable performance on high speed rotation
Construction Functions Materials
  •  Top fabric
Protection for the tension member Cotton, Synthetic fabric
  • Tension member
Primary material for transferring power Polyester, Aramid
  •  Compression rubber
Sectional shape maintaining by side pressure CR
  •  Bottom rubber
Shock absorption and prevention from compression rubber crack CR
raw-edge-cogged-3v-figure

Wrapped Belt- Classical V-Belt

  • Cover fabrics enhance durability by protecting inner parts.
  • Specially designed cords enhance durability and length stability.
  • Excellent in resistance against heat, oil and wear.
  • Safe use is ensured by preventing static electricity.
  • Enhances power transmission efficiency by reducing slip.
Construction Functions Materials
  •  Cover fabric
Protection for the tension member Cotton, Synthetic fabric
  •  Tension member
Primary material for transfer of power Polyester, Aramid
  • Top compression rubber
Maintenance of belt shape(upper) NR, CR
  • Adhesive rubber
Support and protection of tension member adhesion NR, CR
  • Bottom compression rubber
Belt shape maintaining(lower) NR, CR
timing belt-centro

Timing Belt

  • Solves the problem of degrading power transmission, leaking lubricant when using chain during high speed and distance problem between driving and driven part when using gear
  • Prevents from belt elasticity by using glass fiber tension member
  • Excellent in resistance against heat, oil and wear
  • Guarantees high power transmission efficiency under driving conditions of high speed and severe temperature fluctuation
  • Show stable performance on high-speed rotation.
Construction Functions Materials
  •  Rear fabric
Protection of tension member CR, HNBR
  • Tension member
The primary material for transferring power Glass Fiber
  •  Teeth rubber
Tension member protection and belt shape maintaining CR, HNBR
  •  Bottom fabric
Belt and teeth maintaining Nylon
v-ribbed-feature

V-Ribbed Belt

  • The wide width and thin height provide the excellent flexibility
  • High power transmission under operational conditions of high-speed rotation, reverse bending and a small diameter pulley
  • Maintains consistent tension during operation with high tension and low shrinkage cords
  • Excellent in resistance against heat, oil and wear
  • Enhances power transmission efficiency by reducing slip during operation
Construction Functions Materials
  •  Upper fabric
Protection for the inner tension member Cotton, Synthetic fabric
  • Adhesive rubber
Support and protection of tension member adhesion BR, CR, EPDM
  •  Tension member
Primary material for transferring power

Polyester, Nylon

  • Compression rubber
Belt shape maintaining and enhancement of side pressure

BR, CR, EPDM

NARROW-SECTION RAW EDGE V-BELTS-centro

NARROW-SECTION RAW EDGE V-BELTS

Section

~b [mm]

~h [mm]

Sellings Set [pcs]

Length Conversion

XPZ

9,7

8

80

Lw = La – 13

XPA

12,7

10

65

Lw = La – 18

XPB

16,3

13

50

Lw = La – 22

XPC

22

18

40

Lw = La – 30

Professional Quality, Reliability and Performance with Even More Efficiency and Life.
  • Extra Long life.
  • Minimal elongation.
  • Suitable for  small diameter pulley.
  • Suitable for high revolutions and powers.
  • Precise manufacturing on computer driven production line.
  • Resistance to temperatures from -45 to +80 °C.
  • Increased resistance to mineral oils.
  • Increased resistance to abrasion.
CLASSICAL-SECTION WRAPPED V-BELTS-centro

CLASSICAL-SECTION WRAPPED V-BELTS

Section

~b [mm]

~h [mm]

Range of Lw Lengths [mm]

Sellings Set [pcs]

Length Conversion

Z

10

6

530 – 7000

65

Lw = Li + 20

A

13

8

590 – 7000

55

Lw = Li + 30

B

17

11

700 – 15000

40

Lw = Li + 40

20

20

12,5

1110 – 15000

35

Lw = Li + 50

C

22

14

1110 – 15000

35

Lw = Li + 50

25

25

16

1100 – 15000

30

Lw = Li + 60

D

32

20

2240 – 15000

11

Lw = Li + 75

38

38

25

2500 – 15000

9

Lw = Li + 80

E

40

25

2500 – 15000

9

Lw = Li + 80

3L

9,7

6

530 – 7000

65

La = Lw + 16

4L

12,7

8

590 – 7000

55

La = Lw + 20

5L

16,8

11

700 – 7000

40

La = Lw + 26

Professional Quality and Reliability.
  • Modern technology of production process.
  • L=L system (starting from 1000 mm Li) guarantees accurate length tolerances for usage in sets.
  • Electrically conductive (ISO 1813).
  • Resistance to temperatures from -30 to +80 °C
  • Recommended relative humidity 65 ±15 %.
CLASSICAL-SECTION RAW EDGE V-BELTS-centro

CLASSICAL-SECTION RAW EDGE V-BELTS

Section

~b [mm]

~h [mm]

Sellings Set [pcs]

Length Conversion

YX

6

4

120

Lw = Li + 15

X8

8

5

100

Lw = Li + 19

ZX

10

6

80

Lw = Li + 22

AX

13

8

60

Lw = Li + 30

BX

17

11

50

Lw = Li + 43

CX

22

14

39

Lw = Li + 58

X20

20

12,5

40

Lw = Li + 48

Professional Quality and Reliability with Extra Efficiency and Long Life.
  • Extra Long life.
  • Minimal elongation.
  • Suitable for  small diameter pulley.
  • Suitable for high revolutions and powers.
  • Precise manufacturing on computer driven production line.
  • Resistance to temperatures from -45 to +80 °C.
  • Increased resistance to mineral oils.
  • Increased resistance to abrasion
TEXTILE RUBBER OIL SEALS-centro

TEXTILE RUBBER OIL SEALS

Oil seal with flexible reinforced textile-rubber back and rubber sealing lip with garter spring.

A clamping plate is required.

The seat of the garter spring (stainless steel) is designed to prevent its accidental loss during assembly. Particularly useful for “blind” installations on site.

Garter spring also available encapsulated in resin or other materials, for protection from chemicals and dirt.

TGA type provided with axial (A) and radial (R) lubrication groves.

TGR type provided with radial (R) lubrication grooves.

 

Download:

FP-ATS_TGU-TGA-TGR-Info-Data-Sheet_EN-Rev01_30-03-17.pdf

Technical Features

  1. Textile-rubber reinforced back
  2. Rubber sealing lip
  3. Spring housing with engineered seat to prevent its accidental loss during assembly
  4. Garter spring
  5. Sealing edge made by cutting process
  6. Lubrication grooves

Materials

  • Textile-rubber reinforced back:
    NBR; FKM; HNBR
  • Elastomer:
    NBR; FKM; HNBR
  • Garter spring:
    AISI 302; AISI 316
RUBBER END COVERS-centro

RUBBER END COVERS

Rubber End Covers are designed for static applications, and to act as a plug or barrier. They are used in common applications, and specially for sealing in the gearbox as an end cap. The temperature and the pressure ranges are depending on the material.

oil seal type l1-centro

OIL SEALS TYPE L

Oil seals with external metal casing ground according to FP’s internal specifications and executed in one single piece without welding points.

  •  The sealing lip is vulcanized directly onto the metal case.
  • The type L1 is particularly indicated when there is limited space between the housing and the shaft.
  • Also available with an additional dust lip.
Download:

FP-ATS_L-Info-Data-Sheet_EN-Rev01_03-11-16.pdf

Technical features:
  1. Metal outer casing with ground surface
  2. Garter spring
  3. Mould made sealing lip
Materials:
  1. Metal casing: Fe-DC04; AISI 304
  2. Garter spring: AISI 302; AISI 316; C72 phosphased
  3. Elastomer: NBR; FKM; VMQ; HNBR

 

OIL SEALS TYPE L2M®

OIL SEALS TYPE L2M®

Developed specifically for severe operating conditions with great misalignments and high speeds where rigidity and strength are necessary.

Recovery of misalignment up to 5 mm (radial up to 2,5 mm).

A groove on the external diameter allows the operator to center the oil seal in the housing bore, easing the assembly.

The outer metal case of the oil seal is conceived in one single piece without welding points.

Available on demand with rubber or iron spacers.

The sealing lip is vulcanized onto the metal casing.

Download:

FP-ATS_L2M-Info-Data-Sheet_EN-Rev01_07-10-16.pdf

Technical features:
  1. Metal outer casing with ground surface
  2. Stiffening ring
  3. Finger spring
  4. Garter spring
  5. Rubber sealing ring vulcanized on the metal case
Materials:
  1. Metal casing: Fe-DC04
  2. Stiffening ring: Fe 37
  3. Finger spring: AISI 301
  4. Garter spring: AISI 316
  5. Elastomer: NBR; HNBR; FKM; VMQ
OIL SEALS TYPE L1M

OIL SEALS TYPE L1M

These shaft oil seals are similar to the L2M® type, and have been developed for small diameter cylinders, starting from 100 mm. For smaller diameters, please contact us to evaluate our production capacity.

Made with a strong external metal casing ground according to FP’s internal specification, onto which is vulcanized the sealing element. Available in various elastomers.

The presence of a forged steel ring bound to the external metal casing, and a finger spring in stainless steel vulcanized with the sealing lip ensure the correct sealing performance, even when shock loads arise.

This oil seal is recommended for applications with grease and low speeds.

An additional dust lip is available upon request.

Download:

FP-ATS_L1M-Info-Data-Sheet_EN-Rev01_03-11-16.pdf

Technical features:
  1. Metal outer casing with ground surface
  2. Vulcanized finger spring
  3. Mould made sealing lip
  4. Stiffening ring
Materials:
  1. Metal casing:Fe-DC04; AISI 304
  2. Finger spring: AISI 301
  3. Elastomers:  NBR; FKM; VMQ; HNBR
  4. Stiffening ring: Fe 37
OIL SEALS TYPE GM-centro

OIL SEALS TYPE GM

All-rubber oil seal with a vulcanized stainless steel finger spring.

Recommended for difficult assembly conditions and on-site seal replacements which avoid opening the cylinder. It is mostly used in its “split” (open) shape and supplied with the requested length.

In its “endless” (closed) shape, the GM type is suitable as a wiper for hydraulic applications.

Preferably used in applications with grease lubrication and in dusty environments.

The smallest feasible diameter is 100 mm. For smaller sizes contact our offices.

Download:

FP-ATS_GM-Info-Data-Sheet_EN-Rev00_06-10-16.pdf

Technical features:
  1. Rubber body
  2. Vulcanized finger spring
  3. Sealing edge made through cutting process
Materials:
  1. Elastomer: NBR; FKM; VMQ; HNBR; EPDM
  2. Finger spring: AISI 301

 

OIL SEALS TYPE TGF

OIL SEALS TYPE TGF

Self-retaining all-rubber oil seal with a vulcanized flexible metal band to be mounted without clamping plate.

Available also in “split” (open) form. Mainly used for maintenance in applications without any pressure. In this case the clamping plate is recommended.

Garter spring available also encapsulated in resin or other materials for protection from chemical aggressions and dirt.

Download:

FP-ATS_TGF-Info-Data-Sheet_EN-Rev02_30-03-17.pdf

Technical features:
  1. Rubber body
  2. Flexible metal band
  3. Garter spring
  4. Sealing edge made through the cutting process
Materials:
  1. Elastomer:NBR; FKM; HNBR
  2. Metal band: Fe C67 temperato
  3. Garter spring: AISI 302; AISI 316
ROTARY SHAFT OIL SEAL-centro

ROTARY SHAFT OIL SEAL

The rotary shaft oil seal is an indispensable component in any lubricated rotating equipment.

The •FP• oil seals provide the right solution to every sealing problem.

•FP• rotary shaft oil seals are produced according to modern engineering techniques with high-performing materials, as requested by industry specifications.

Download:

FP-ATS_G-M-Info-Data-Sheet_EN-Rev02_15-11-16.pdf

Technical features
  1. Metal body covered with elastomer
  2. Garter spring
  3. Sealing edge made through cutting process
Materials
  1. Metal body:DC04; AISI 304; AISI 316
  2. Garter spring: AISI 302; AISI 316; C72 phosphated
  3. Elastomer:NBR; FKM; VMQ; HNBR; EPDM
OIL SEALS TYPE GMA-cetro

OIL SEALS TYPE GMA

Guarnizione auto-bloccante con anello metallico di rinforzo rivestito in gomma.

Molla di giarrettiera modellata nel labbro di tenuta.

Disponibile con o senza distanziali integrati per sistemi di montaggio gemelli.

Caratteristiche tecniche:
  1. Corpo in gomma
  2. Anello rigido
  3. Molla di giarrettiera
  4. Bordo di tenuta realizzato attraverso il processo di taglio

 

TRACTION MOTORS-centro

TRACTION MOTORS

Generic Features:

Asynchronous single phase electric motors totally enclosed with external fan-cooling. Insulation class F tropicalized.

Constructive shapes: IM B3, IM B5, IM B14, IM B34, IM B35. Manufactured with the best products present on the Italian market to obtain the best output and lifetime.

Mechanical construction and assembling in automatic lines to reduce to the minimum noise and vibrations. Test of the finished product on 100% of the production to eliminate the returns caused by manufacturing defects and have the best reliability. Shafts are generally made of carbon steel C45 but on request we can also make shafts in stainless steel.

The housings, shields and flanges are in die-casted aluminium alloy (on request also in cast iron), fan and fan cover in thermoplastic material or zinc-coated sheet (only fan cover).

The standard voltage is Volt 230-50Hz, 5% of the rated voltage.

TECHNICAL FEATURES

Sizes:

Power:

  • 2 Poles:
  • 4 Poles:

Service:

N. Poles:

Level of protection:

HOLLOW SHAFT MOTORS

HOLLOW SHAFT MOTORS

Generic Features:

Asynchronous single phase electric motors totally enclosed with external fan-cooling. Insulation class F tropicalized.

Constructive shapes: IM B3, IM B5, IM B14, IM B34, IM B35. Manufactured with the best products present on the Italian market to obtain the best output and lifetime.

Mechanical construction and assembling in automatic lines to reduce to the minimum noise and vibrations. Test of the finished product on 100% of the production to eliminate the returns caused by manufacturing defects and have the best reliability. Shafts are generally made of carbon steel C45 but on request we can also make shafts in stainless steel.

The housings, shields and flanges are in die-casted aluminium alloy (on request also in cast iron), fan and fan cover in thermoplastic material or zinc-coated sheet (only fan cover).

The standard voltage is Volt 230-50Hz, 5% of the rated voltage.

TECHNICAL FEATURES MONOPHASE

Sizes: IEC size from MEC 90 to MEC 132

Power:

  • 2 Poles: 1.1 KW – 7.5 KW
  • 4 Poles: 1.1 KW – 7.5 KW
  • 6 Poles: 0.75 KW – 7.5 KW

Service: S1

N. Poles: 2-4-6

Level of protection: IP54

TECHNICAL FEATURES TRIPHASE

Sizes: IEC size from MEC 90 to MEC 160

Power:

  • 2 Poles: 1.5 KW – 18.5 KW
  • 4 Poles: 1.1 KW – 15 KW
  • 6 Poles: 0.75 KW – 11 KW

Service: S1

N. Poles: 2-4-6

BRAKE MOTORS

BRAKE MOTORS

Generic Features:

Asynchronous single phase electric motors totally enclosed with external fan-cooling. Insulation class F, tropicalized.

Constructive shapes: IM B3, IM B5, IM B14, IM B34, IM B35. Manufactured with the best products present on the Italian market to ensure the best quality and lifetime.

Mechanical construction and assembling in automatic lines to avoid noise and vibrations. Test on 100% of the production for the best reliability and zero quality claims.

The shafts are usually made of carbon steel C45 but on request also stainless steel shafts can be proposed.

The housings, shields and flanges are in die-casted aluminium alloy (on request also in cast iron) fan in thermoplastic material, fan cover in zinc-coated sheet (or thermoplastic material on request).

The standard voltage is Volt 230-50Hz, 5% of the rated voltage.

TECHNICAL FEATURES

Sizes: IEC sizes from MEC 56 to MEC 132

Power:

  • 2 Poles: 0.09 KW – 9.2 KW
  • 4 Poles: 0.06 KW – 7.5 KW
  • 6 Poles: 0.09 KW – 5.5 KW

Service: S1 (continuous service)

N. Poles: 2-4-6

Level of protection: IP55

Abb high voltage rib cooled motors HXR-centro

Abb high voltage rib cooled motors HXR

ABB’s TEFC (totally enclosed fan cooled) motors, type HXR, are custom designed for an ideal match with each customer and application.

Typical applications include pumps, fans, blowers, compressors, conveyors, pulverizers, and even ship thrusters and AC generators. Abb High voltage rib cooled motors HXR are an excellent choice for driving pumps in power plants and process industries, as well as many other continuous duty applications.

Losses have been minimized by the effective use of material and optimized fan designs. Reduced core and fan losses mean there is no sharp drop in the efficiency curve at partial load.

ABB is constantly working to further improve the environmental characteristics of its products. The HXR range of engineered motors – featuring high efficiency, long service life and low noise level – are not only environmentally friendly but also cost less to run.

HXR motors also feature low noise levels, and are among the most silent high efficiency TEFC motors available. Most ratings produce less than 80 dB(A) when measured at one meter.

Abb slip-ring modular motors-centro

Abb slip-ring modular motors

Abb slip-ring modular motors are used in applications requiring high starting torque or low starting current. These motors provide maximum availability, and are especially recommended for heavy load inertia applications like mill drives or situations where network conditions are weak.
ABB’s slip-ring modular motors are available as N-series general purpose motors (type NMK) and A-series engineered motors (types AMK and AML).

N-series general purpose motors combine cost-efficient standardized designs and short lead times with safety, productivity, energy efficiency and reliability. They are targeted at applications where a highly customized motor is not needed.

The pre-engineered N-series complements ABB’s A-series of engineered motors, which are highly customized, fine-tuned to the customer’s precise needs, and offer a high degree of engineering flexibility.

]Abb high voltage rib cooled motors NXR and AXR-centro

Abb high voltage rib cooled motors NXR and AXR

Abb high voltage rib cooled motors NXR and AXR provide a unique combination of small size, high power density, high reliability, low losses and easy maintenance. They are based on the successful, high performance rib cooled motor range, type HXR.

These multipurpose rib cooled motors offer high power density, easy configurability, and built-in serviceability. Versions specifically designed for use with variable speed drives are also available. VSD control generally means even higher efficiency and precise process control in both quadratic and constant torque applications.

ABB’s rib cooled motors are available as N-series general purpose motors (type NXR) and A-series engineered motors (type AXR).

N-series general purpose motors combine cost-efficient standardized designs and short lead times with safety, productivity, energy efficiency and reliability. They are targeted at applications where a highly customized motor is not needed.

The pre-engineered N-series complements ABB’s A-series of engineered motors, which are highly customized, fine-tuned to the customer’s precise needs, and offer a high degree of engineering flexibility.

Abb high voltage modular induction motors-centro

Abb high voltage modular induction motors

Abb high voltage modular induction motors provide high efficiency, reliability and availability in the toughest and most demanding applications.

Built on the most successful modular motor platform, they comply with all relevant international standards, are optimized for variable speed control and undergo rigorous testing at every stage of production.

ABB’s modular induction motors are available as N-series general purpose motors (type NMI) and A-series engineered motors (type AMI).

N-series general purpose motors combine cost-efficient standardized designs and short lead times with safety, productivity, energy efficiency and reliability. They are targeted at applications where a highly customized motor is not needed.

The pre-engineered N-series complements ABB’s A-series of engineered motors, which are highly customized, fine-tuned to the customer’s precise needs, and offer a high degree of engineering flexibility.

Abb process performance motors-centro

Abb process performance motors

Abb process performance motors provide great flexibility for customer specific solutions and can be individually designed to meet the exact demands of the application.

Different technologies are needed to provide the best high efficiency motor solution throughout the power range of low voltage motors. ABB motor will always be fit for purpose to provide the most cost efficient and sustainable solution based on your requirements.

Process performance motors offer you:

Solution best suitable for your need
Efficiency classes from IE2 up to IE5
Wide range of options for all industries and applications
Order specific documentation

Abb general performance motors-centro

Abb general performance motors

Developed from the outset for maximum convenience and easy handling, ABB General performance motorscan be used in a wide range of industrial applications. These motors are especially suitable for OEMs to build into pumps and fans, as well as for gearboxes, conveyors, general machinery and other applications. Some standard designs are available from stock, while customer and application specific solutions are manufactured to order and can be tailored to meet specific needs.

  • Simple and robust design
  • Off-the-shelf available
  • Extensive modification possibilities with brand standard designs
  • One line documentation
Abb motors and generators for explosive atmospheres-centro

Abb motors and generators for explosive atmospheres

ABB offers a wide range of low and high voltage motors and generators for all protection types. Abb motors and generators for explosive atmospheres are certified according to all major standards.

  • Broad range of all protection types and levels
  • Dedicated project management for complex projects
  • Support through the whole lifecycle – project management to global certified service network
Abb flameproof motors-centro

Abb flameproof motors

We offer a full range of low and high voltage Abb flameproof motors, from 0.55 to 7,500 kW.

Certified according to IECEx and ATEX, wide range of local certificates available
Flexible design adoptable to any application in the chemical, oil and gas segment
Suitable for Zone 1 and 2.

  • Low voltage flameproof motors
  • High voltage flameproof motors
  • Flameproof motors for underground mines
SERVOVENTILATED MOTORS-centro

SERVOVENTILATED MOTORS

Generic Features:

TECHNICAL FEATURES

Sizes: from Mec56 to Mec200

Power:

  • 2 Poles: From 0.09 To 45 KW
  • 4 Poles: From 0.06 To 30 KW
  • 6 Poles: From 0.09 To 22 KW

Service: S1 (continuous service)

N. Poles: 2-4-6

Level of protection: IP55

FILES

Technical data:

Overall Dimensions:

  •  Shape IM B3
  •  Shape IM B5
  •  Shape IM B14
  •  Shape IM B3-B5
  •  Shape IM B3-B14
Abb dust ignition proof motors-centro

Abb dust ignition proof motors

ABB offers a wide range of dust ignition proof motors, both low and high voltage, from 0.25 to 7,700 kW.

The motors fulfill the EN standards and ATEX directives, and comply with many other international and local regulations
Low voltage motors fulfill IE2 and IE3 efficiency class requirements
With Ex t motors, any explosion transmission of dust is prevented

Abb non-sparking motors and generators-centro

Abb non-sparking motors and generators

Equipment protection level Gc for zones 1 and 2

ABB offers a wide range of non-sparking motors, both low and high voltage, from 0.25 kW to 75 MW.

The motors are certified according to IECEx and ATEX, and comply with many other international and local regulations
Low voltage non-sparking motors fulfill IE2 and IE3 efficiency class requirements

Abb IEC DC motors-centro

Abb IEC DC motors

Abb IEC DC motors features:

Extended speed range capabilities with superior commutating performance
Longer brush wear lengths compared to conventional designed brushes
Reduced commutator diameters resulting in lower peripheral speeds and extended brush life
Precise bearing tolerances preventing the risk of grease leakage into the motor
High quality bearings with long lubrication intervals
Mechanical brush wear monitoring system – no special monitoring probed brushes required

Specifications:

IEC frame sizes 180, 200, 225, 250, 280, 315, 400
Power up to 1400 kW Torque up to 22.000 Nm
Voltage up to 810 V
IM – horizontal or vertical, foot or flange
IP – 22-55
IC-06, 17, 37, 86W, 666, 410
Class 200 Insulation
Meets standards IEC, CE, CSA (up to 710 V)

Abb synchronous motors-centro

Abb synchronous motors

Abb synchronous motors products range:

  • Synchronous motors for general purpose applications
  • Synchronous motors for pulp and paper applications
  • Synchronous motors for chemical and-air separation applications
  • Synchronous direct-on-line 4 and 6 poles motors
  • Synchronous motors for marine applications
  • Synchronous direct-on-line 8 to 40 poles motors
  • Synchronous motors for metals applications
  • Synchronous variable speed 4 to 40 poles motors
  • Synchronous motors for mining applications
  • Synchronous variable speed 4 and 6 poles motors
  • Synchronous motors for oil and gas applications
  • Very high voltage synchronous motors
  • Synchronous motors for water and wastewater applications
HIGH STARTING TORQUE MOTORS-centro

HIGH STARTING TORQUE MOTORS

Generic Features:

Asynchronous single phase electric motors totally enclosed with external fan-cooling. Insulation class F, tropicalized.

Constructive shapes: IM B3, IM B5, IM B14, IM B34, IM B35. Manufactured with the best products present on the Italian market to ensure the best quality and lifetime.

Mechanical construction and assembling in automatic lines to avoid noise and vibrations. Test on 100% of the production for the best reliability and zero quality claims.

The shafts are usually made of carbon steel C45 but on request also stainless steel shafts can be proposed.

The housings, shields and flanges are in die-casted aluminium alloy (on request also in cast iron) fan in thermoplastic material, fan cover in zinc-coated sheet (or thermoplastic material on request).

The standard voltage is Volt 230-50Hz, 5% of the rated voltage.

TECHNICAL FEATURES

Sizes: IEC from MEC 56 to MEC 132

Power:

  • 2 Poles: 0.09 KW – 9.2 KW
  • 4 Poles: 0.06 KW – 7.5 KW
  • 6 Poles: 0.09 KW – 5,5 KW

Service: S1 (continuous service)

N. Poles: 2-4-6

Level of protection: IP55

Abb Megadrive LCI medium voltage drives-centro

Abb Megadrive LCI medium voltage drives

Well-proven and reliable: robust medium voltage drives for high power applications

The well-proven technology offered in the Abb Megadrive LCI medium voltage drives controls your high power applications and provides soft starting of large synchronous motors, reducing the impact on your network and machinery. Thanks to many years of successful performance, the drive is renowned for its high availability and reliability.

The drive`s simple design and proven components enable trouble-free use and maximized uptime of your processes. Get a drive solution that gives you peace of mind by ensuring efficient operation which you can count on day after day and year after year.

 

THREE PHASE MOTORS IE2-IE3-centro

THREE PHASE MOTORS IE2-IE3

Generic Features:

TECHNICAL FEATURES IE2

Sizes: from Mec56 to Mec200

Power:

  • 2 Poles: From 0.75 To 37 KW
  • 4 Poles: From 0.75 To 30 KW
  • 6 Poles: From 0.75 To 22 KW

Service: S1 (continuous service)

N. Poles: 2-4-6

Level of protection: IP55

TECHNICAL FEATURES IE3

Sizes: from Mec56 to Mec200

Power:
  • 2 Poles: From 0.75 To 30 KW
  • 4 Poles: From 0.75 To 22 KW
  • 6 Poles: From 0.75 To 18.5 KW

Service: S1 (continuous service)

N. Poles: 2-4-6

Level of protection: IP55

Abb ACS6000 medium voltage drives-centro

Abb ACS6000 medium voltage drives

Modular and reliable: medium voltage drives with “building block” design for demanding applications

Look no further than Abb ACS6000 medium voltage drives if your high performance applications require a single or multi-motor drive solution. Well-proven, certified modules, redundancy possibilities and a compact footprint have been instrumental in having its design commonly referred to as “best-in-class”. The drive is configured to fit with your needs and adapts to the requirements of your business.

The tailored drive solutions deliver fast and accurate control of dynamic processes in the metals, marine and mining industries. The drive`s multi-motor operation optimizes efficiency while reducing your costs and space requirements.

Abb ACS580MV medium voltage drives-centro

Abb ACS580MV medium voltage drives

Effortless energy efficiency: all-compatible variable frequency drives for a wide range of applications in many industries

Abb ACS580MV medium voltage drives turn complicated to simple while ensuring highest reliability. The straightforward settings menu and assistants help you to commission the variable speed drive quickly and get it into action. All the essential features are built-in as standard, which reduces the need for additional hardware and facilitates drive selection. The drive is easy to use in terms of controlling pumps, fans and many other applications like conveyors and mixers (variable and constant torque).

Focus industries and applications

Cement
Mining
Power
Water & Wastewater
Oil & Gas
Pulp & Paper

Abb ACS5000 medium voltage drives-centro

Abb ACS5000 medium voltage drives

Powerful and reliable: Medium voltage drives with superior safety features and application-specific functionalities

The Abb ACS5000 medium voltage drives effortlessly control your high power applications such as compressors, pumps and fans. It conforms to operations in many fields, but is especially suited for the chemical, oil, gas and power generation industries due to its robust design.

The drive comes with various industry-specific features, which integrate seamlessly with your system and increase productivity of your processes. Due to the ACS5000`s enhanced arc resistant design, you can be sure of highest safety in your day to day operation for your personnel and equipment.

THREE PHASE MOTORS

THREE PHASE MOTORS

Generic Features:

Asynchronous three phase motors. Totally enclosed and with external fan cooling.

Constructive forms: IM B3, IM B5, IM B14 IM B34, IM B35. Side terminal board on request

Insulation class F, tropicalized, according to norms IEC 60034 -IEC 60072 – EN 50347.

Standard voltage: 230-400/50-60Hz, 10% – 400-690/50-60Hz, 10%.

Power and frame size:

  • 2 poles frame size 56-63-71-80-90-100-112-132-160-180 power from 0,18 Kw to 37 Kw
  • 4 poles frame size 56-63-71-80-90-100-112-132-160-180 power from 0,12 Kw to 22 Kw
  • 6 poles frame size 63-71-80-90-100-112-132-160-180 power from 0,09 Kw to 18,5 Kw
  • 6 poles frame size 71-80-90-100-112-132-160-180 power from 0,12 Kw to 11 Kw

TECHNICAL FEATURES

Sizes: from Mec56 to Mec200

Power:

  • 2 Poles: From 0.09 To 45 KW
  • 4 Poles: From 0.06 To 30 KW
  • 6 Poles: From 0.09 To 22 KW

Service: S1 (continuous service)

N. Poles: 2-4-6

Level of protection: IP55

Abb ACS2000 medium voltage drives-centro

Abb ACS2000 medium voltage drives

Flexible and reliable: technology leading medium voltage drives for a wide variety of applications

Abb ACS2000 medium voltage drives perfectly adapt to a wide variety of standard applications across all industries. Various options and drive configurations allow you to choose a perfect match to increase efficiency of your processes and systems.

Boundless versatility makes the ACS2000 sure to fit perfectly into different conditions and environments, including hazardous areas, all over the world. Benefit from the drive`s simple design and robust control platform which ensures reliable operations every day, everywhere.

 

SINGLE PHASE MOTORS

SINGLE PHASE MOTORS

Generic Features:

Asynchronous single phase electric motors totally enclosed with external fan-cooling. Insulation class F, tropicalized.

Constructive shapes: IM B3, IM B5, IM B14, IM B34, IM B35. Manufactured with the best products present on the Italian market to ensure the best quality and lifetime.

Mechanical construction and assembling in automatic lines to avoid noise and vibrations. Test on 100% of the production for the best reliability and zero quality claims.

The shafts are usually made of carbon steel C45 but on request also stainless steel shafts can be proposed.

The housings, shields and flanges are in die-casted aluminium alloy (on request also in cast iron) fan in thermoplastic material, fan cover in zinc-coated sheet (or thermoplastic material on request).

The standard voltage is Volt 230-50Hz, 5% of the rated voltage.

TECHNICAL FEATURES

Sizes: IEC sizes from MEC 56 to MEC 132

Power:

  • 2 Poles: 0.09 KW – 9.2 KW
  • 4 Poles: 0.06 KW – 7.5 KW
  • 6 Poles: 0.09 KW – 5.5 KW

Service: S1 (continuous service)

N. Poles: 2-4-6

Level of protection: IP55

Abb ACS1000 medium voltage drives-centro

Abb ACS1000 medium voltage drives

Flexible and reliable: well-proven medium voltage drives for a wide variety of applications

Whatever your industry, Abb ACS1000 medium voltage drives are an all-rounder to control your standard applications and optimize your processes. Tailor the drive to your specific application by selecting from an extended choice of pre-engineered options.

Extensive versatility makes the ACS1000 suitable for operations in different conditions and environments, even hazardous areas. High reliability in your daily business is ensured by the drive`s simple design and robust control platform that has proven itself over many years.

 

CMS.. series Sew Eurodrive electric cylinder-centro

CMS.. series Sew Eurodrive electric cylinder

The interesting alternative to pneumatic or hydraulic cylinders: electromechanical electric cylinders of the CMS.. series. With patented oil bath lubrication, they deliver precise and reliable linear movement with maximum dynamics. Whether via direct motor mounting or when mounted via an adapter.

Depending on requirement: standard or modular

Applications with linear movement often place high demands on the travel profile. This is why you should implement intelligent drive systems and combine our energy efficient electric cylinders with our intelligent inverters.

Your benefits: Drive systems that easily enable different travel profiles and offer a high level of positioning flexibility, new programming options, power control and a diagnostics function. For reliable implementation of your production processes.

Our CMS.. standard series enables quick and direct motor mounting. It is available in 3 motor sizes for axially serial applications.

Equipped with patented oil bath lubrication which considerably enhances the service life of the CMSB.. generation electric cylinders.

The CMSM.. modular series is available in addition to the standard design. Also equipped with the patented oil bath lubrication, the linear unit can be simply attached to our CMP.. series synchronous servomotors using an adapter. The decisive advantage: Extremely compact drives with the full range of functions offered by the CMP.. modular motor system.

SL2 Sew Eurodrive synchronous linear servomotors-centro

SL2 Sew Eurodrive synchronous linear servomotors

The ideal drive solution for optimum machine integration

The already high demands placed on machine cycles, acceleration, and linear traveling velocities in many areas such as handling, transportation, and production are continuing to increase steadily. At the same time, users of these demanding systems attach particular importance to the use of virtually wear-free and maintenance-free drive technology. The convection-cooled direct drive covers all requirements to ensure rigorously high control quality with powerful dynamics and consistently high precision levels.

Specially designed for process reliability. Because linear motion and force is generated directly, the linear motors do not require mechanical transmission elements or wear parts, such as spindles, ball bearings, or toothed belts.

In addition, the latest winding technology and laminated iron core required for this ensure an optimum force-density ratio. There are 3 motor versions available: SL2-Basic, SL2 Advance System, and SL2 Power System. All motors are available in several widths and lengths, and in speed classes 1, 3, and 6 m/s. Your flexibility is also important to us: The secondaries for the linear motors are available in different lengths and can be lined up easily, if required.

The SL2-Advance/Power System can be integrated easily as a gearmotor. Our motor cooling unit already offers all of the key elements needed for machine construction. It covers cooling surfaces, strength, weight, bearing installation, load assembly, and thermal expansion. The SL2 Power System has a higher rated force thanks to the integrated forced cooling fan.

The SL2-Basic allows you to overcome the limitations of conventional machine construction. Reduce drive components to the bare essentials. Design your own optimum machine using modular components.

Abb legacy drives-centro

Abb legacy drives

Maximizing availability and performance.

ABB has developed a product life cycle management model aimed to provide proactive service offerings for maximizing product’s availability and performance. The life cycle phases are active, classic, limited and obsolete.

The availability of individual services varies dependent on the drive’s life cycle phase. Abb legacy drivesprovide not only optimum support to end-users but also a smooth transition to a new drive when the service life of the current drive ends.

BS.F series Sew Eurodrive helical-bevel servo gear units-centro

BS.F series Sew Eurodrive helical-bevel servo gear units

Low-backlash helical-bevel servo gear units of the BS.F series

Sew Eurodrive Servo gear units that are remarkable for their wide range of variants and compact design – our low-backlash helical-bevel servo gear units of the BS.F series! They are available in six sizes and five output variants, providing you with countless possibilities.

The BS.F  ensure low rotational clearance, even for the standard designs. You also have the option of reducing the rotational clearance further. Rotational clearance will remain consistently low for the entire servo gear unit service life due to the wear-free operating performance and high-endurance design of the running gears.

The versatility of these units extends beyond the technical characteristics to the large number of motor mounting options made possible by the EBH motor adapter.

The Sew Eurodrive helical-bevel servo gear units are designed for nominal torques of 40 Nm to 1220 Nm. The permitted acceleration torque ratings are significantly higher than these values. The units are also remarkable for their high permissible overhung loads, which vary between 2600 N and 36 000 N, depending on the size and gear ratio.

PS.F/PS.C series Sew Eurodrive planetary servo gear units-centro

PS.F/PS.C series Sew Eurodrive planetary servo gear units

Low-backlash planetary servo gear units

With consistently low rotational clearance, high torsional rigidity and a high level of efficiency, these highly precise and extremely powerful Sew Eurodrive servo gear units constitute an optimal basis for a variety of servo drives.

The PS.F Sew Eurodrive planetary servo gear units are designed for nominal torques of 25 Nm to 3,000 Nm; the PS.C series is designed for nominal torques of 30 Nm to 320 Nm.

All gear ratios from i = 3 to i = 100 are integers and finely stepped. This means that the servo gear units are particularly suitable for use with controllers that require integer resolution ratios.

Abb industry specific drives-centro

Abb industry specific drives

Choose a drive that understands your business just like you do

Watch your business thrive with no-nonsense reliability, energy efficiency and intelligent motor control. Try our Abb industry specific drives that speak your language with tailor-made application software. Take your business forward with everything working like clockwork, thanks to the built-in expertise of our industry specific drives.

Highlights:
  • Dedicated drive solutions for industries such as HVAC and water and wastewater
  • Purpose-designed software features for added value to your business
  • User interfaces that speak your language
  • Energy efficiency features that help you save and manage energy
Abb industrial drives-centro

Abb industrial drives

Enabling uncompromised productivity for your business

Cover all your possibilities with our all-compatible ACS880 Abb industrial drives designed to tackle any of your motor-driven applications, in any industries, whatever the power range. Our drive is compatible with virtually all of your processes, automation systems, users and business requirements. The innovation behind the ACS880 drives is our drives architecture that simplifies operation, optimizes energy efficiency and helps maximize process output. The ACS880 series consists of single drives, multidrives and drive modules.

Our ACS880 industrial drives offer you:
  • A wide power and voltage range from 0.55 to 5600 kW, 230 to 690 V
  • Enclosure classes IP00, IP20, IP21, IP42, IP54 and IP55
  • Direct torque control (DTC) for precise open and closed loop control
  • Built-in safety features for simplified configuration
MOVIAXIS MMD60B decentralized servo inverter-centro

MOVIAXIS MMD60B decentralized servo inverter

High-performance MOVIAXIS MMD60B decentralized servo inverter

Do your systems and interlinked machine modules extend to over ten meters or even up to several hundred meters? If so, the functionality of each of the modular system units is important for you. However, it is only possible for these individual system modules to function on a stand-alone basis and be connected via defined interfaces if this modular approach is applied to the software, low-voltage sensor technology, and low-output drives as well.

The MOVIAXIS MMD60B decentralized servo inverter addresses precisely this gap. It combines high overload capacity with a high-performance, real-time system bus connection.

Decentralized installation and the mounting of the frequency inverter close to the motor makes wiring much easier. Field installations also allow significant savings on control cabinet space. This adds up to significant savings on costs and time during installation. And the overall system is easier and faster to install – with retrofitting options possible also.

Abb machinery drives-centro

Abb machinery drives

Build your profits around premium control and flexibility

You design machines to work precisely to your customer’s expectations. Premium control and design flexibility in motor control is essential. So too is dependability. You can count on all of this in all in our Abb machinery drives, with scalability from basic to the highly advanced machinery applications. Our direct torque control (DTC) gives you highly accurate control for virtually any motor. Our integrated safety features and ready-made application control programs are built on user-friendliness.

Our machinery drives offer you:
  • Flexible hardware and programming for an optimal solution
  • Compatibility with different motors and automation systems
  • Ready-made control programs for different applications
  • Direct torque control (DTC) for highly accurate, sensorless motor control
MOVIPRO ADC application inverter-centro

MOVIPRO ADC application inverter

With its freely programmable drive and application inverter, MOVIPRO ADC brings your production system architecture up to date – regardless of whether you use stationary or mobile materials handling technology.

Compact and freely programmable controller for decentralized drive technology

Do your mobile and stationary materials handling systems need drive systems that are compact and resistant to vibration? Do you require perfectly synchronized multi-axis movements? Are integrated safety functions an absolute must for you?

Our decentralized MOVIPRO ADC drive inverter for application and positioning control meets all of these requirements, and more: Because it can be programmed freely (in accordance with IEC 61131-3 and PLCopen), you can implement application-specific and complex functions in a flexible way. In addition to multi-axis synchronization, precise, local coordination of multiple actuators and sensors is also possible.

With the MOVIPRO ADC drive, positioning and application controller, you can build the foundations for an open and flexible system architecture – whether you’re designing a new system or modernizing an old system. We guarantee you functional compatibility with existing control cabinet applications. When combined with our MOVITOOLS MotionStudio, you can benefit from an integrated software environment for your entire engineering process – from setup and diagnostics right through to maintenance.

MOVIFIT FC application inverters – centro

MOVIFIT FC application inverters – technology

Flexible solutions to demanding materials handling tasks with decentralized drive concept

Automation made easy! Implement demanding materials handling applications with our decentralized application inverter MOVIFIT FC in the technology function level design. The technology design provides both the opportunity to operate standardized application modules as well as to implement your system specific requirements through programming. This can be implemented both for simple speed controlled auxiliary axes through to the operation of simple hoist axes or complex conveyor axes.

Our application inverter is equipped with extensive safety functions and supports virtually all common field bus systems. Optimally equipped for a broad range of applications.

Also choose our MOVIFIT FC for energy efficiency. Combine the inverter with our DRU..J series (IE4 motors) energy efficient motors and an efficient brake control. Save energy and costs in the process.

Implement application functions without any time consuming programming in combination with our application modules. Simple parameterization with the aid of intuitive startup wizards enables the implementation of complex motion sequences such as cam positioning for up to three MOVIMOT. Your tasks can also be freely programmed using the standard IEC 61131 languages In addition, a complete range of program components is available for individual and tailored solutions. The MOVITOOLS MotionStudio enables a complete engineering concept. A tool with all the elements necessary for automation and startup of your system.

Our MOVIFIT FC inverter has more than just internal strengths. The high degree of protection IP65 is standard. Its robust aluminum die cast housing is divided into electronics unit (EBOX) and connection unit (ABOX). A major advantage is the closing mechanism with only one screw. This enables quick assembly and smooth unit replacement for servicing.

Save cost and time on installation as well. The integrated T distributor for energy and communication, the integrated repair switch and digital IOs means that a wide variety of external additional components are no longer required for the installation.

Abb micro drives-centro

Abb micro drives

Big benefits for your small motors

Even your smallest motors can enjoy the daily dependability, reliability, and performance of our drive technology. Abb micro drives can be conveniently tuned to your business needs with precise speed control and simple integration. Add compact efficiency, convenient global service, and expertise, and you have everything you need to add big benefits to your small motors.

Our micro drives offer you:
  • Easy integration into machines with flexible mounting alternatives and compact design
  • Straightforward setup with easy user interfaces and tools
  • Confidence and dependability knowing that each drive is tested before it leaves our factory
  • Wide availability via ABB’s value provider network
MOVIPRO SDC drive inverter-centro

MOVIPRO SDC drive inverter

The compact drive and positioning inverter saves on space and reduces the complexity of your systems. Thanks to decentralized technology, it has a high level of integration and can replace entire control cabinets in the field.

Decentralized drive inverter with positioning control makes project planning easier

Do you want to significantly reduce the complexity of your system architecture? Are you looking for a practice-oriented drive solution that takes up little space and is resistant to vibration?

In that case, the MOVIPRO SDC drive inverter with positioning control from our decentralized drive technology portfolio is the right choice for you. The compact unit provides a high level of integration and can replace entire inverter control cabinets in the field. It also has the advantage that the controller is located near the drive.

In this way, you can install autonomous drive sectors and network them with the MOVIPRO SDC.

Depending on your regional requirements, communication is possible via all common bus systems: PROFIBUS, PROFINET, DeviceNet, EtherNET/IP and MODBUS/TCP.

Conveyor systems and machines that have consistent, decentralized drive technology such as this are far superior to comparable centrally-controlled systems.

Standardized 1-axis application modules make project planning significantly easier for you. You can use them to implement speed control and positioning commands conveniently, simply and quickly at any time. There is also no need for programming because parameterization is performed by the user.

The standard control technology also ensures consistency within your system, as the flexible, field-oriented inverter can control both asynchronous and synchronous motors. Furthermore, the inverter includes local I/Os and supports various brake voltages.

Abb general purpose drives-centro

Abb general purpose drives

Cover your control and energy savings options wisely

Take charge of control and energy saving. Enjoy the plug and play motor control convenience, straight from the box. When you are looking for simplicity and intelligence in a self-contained solution, Abb general purpose drives cover your options wisely. Wherever your business needs are, our globally renowned reliability and service easily matches your requirements.

Our general purpose drives offer you:
  • Drives with all the essential features built-in, simplifying drive selection, installation and use.
  • Intuitive user interfaces for quick drive setup and commissioning.
  • Built-in features for energy efficiency helping you save and manage energy.
  • Wide availability via ABB’s value provider network.
MOVIFIT MC controller – technology: for MOVIMOT-centro

MOVIFIT FC standard inverters – classic

Distributors for controlling several drives

Our MOVIFIT MC distributor in the classic function level design is a decentralized gateway for communication and energy supply. It can control up to three MOVIMOT gearmotors with inverters. Maximum flexibility for your system planning. The same drive concept covers the different mechanical specifications of the system.

The classic function level does not require any explicit operating software for startup. Simple DIP switches make the relevant settings and following this the distributor as well as the associated MOVIFIT is then immediately ready for use. The subordinate MOVIMOT is controlled via the PLC using standardized process data profiles. Our “MOVIFIT Gateway Configurator” gives you simple configuration and diagnostic options.

Our MOVIFIT MC distributor is equipped for use in the field. The high degree of protection IP65 is standard. Its robust aluminum die cast housing is divided into electronics unit (EBOX) and connection unit (ABOX). A major benefit is the closing mechanism with only one screw and the automatic unit replacement. This enables quick assembly and smooth unit replacement for servicing.

Our distributor also has a lot to offer in terms of safety. Equipped with extensive and scalable safety functions, they can be used in safety-related areas. Everything is possible, from the safe disconnection of MOVIMOT drives to the speed-dependent safety functions activated via fieldbus.

MOVIFIT MC controller – technology: for MOVIMOT-centro

MOVIFIT MC controller – technology: for MOVIMOT

Our controller is used in systems which include the controller mounted close to the motor. Parameterize your system with up to three drives using our standardized application modules.

Controller for demanding drive tasks

Automation made easy. Implement complex drive tasks and system- specific software requirements with our controller MOVIFIT MC in the technology function level design for up to three MOVIMOT gearmotors with inverter.

Uncomplicated and consistent! The technology function level provides both the opportunity to operate standardized application modules as well as to implement your system-specific requirements through programming. MOVIFIT MC takes on the complete energy supply of the system section.

Implement application functions without any time-consuming programming in combination with our application modules.

Simple parameterization with the aid of intuitive startup wizards enables the implementation of complex motion sequences such as cam positioning for up to three MOVIMOT. Your tasks can also be freely programmed using the standard IEC 61131 languages.

Our controller MOVIFIT MC has more than just internal strengths. The high degree of protection IP65 is standard. Its robust aluminum die cast housing is divided into electronics unit (EBOX) and connection unit (ABOX). A major advantage is the closing mechanism with only one screw. This enables quick assembly and smooth unit replacement for servicing.

Our distributor also has a lot to offer in terms of safety. They are equipped with extensive and scalable safety functions and can be used in safety-related areas. Everything is possible, from the safe disconnection of MOVIMOT drives to the speed-dependent safety functions activated via fieldbus.

MOVIFIT MC Distributors – classic-centro

MOVIFIT MC Distributors – classic: for MOVIMOT

Distributors for controlling several drives

Our MOVIFIT MC distributor in the classic function level design is a decentralized gateway for communication and energy supply. It can control up to three MOVIMOT gearmotors with inverters. Maximum flexibility for your system planning. The same drive concept covers the different mechanical specifications of the system.

The classic function level does not require any explicit operating software for startup. Simple DIP switches make the relevant settings and following this the distributor as well as the associated MOVIFIT is then immediately ready for use. The subordinate MOVIMOT is controlled via the PLC using standardized process data profiles. Our “MOVIFIT Gateway Configurator” gives you simple configuration and diagnostic options.

Our MOVIFIT MC distributor is equipped for use in the field. The high degree of protection IP65 is standard. Its robust aluminum die cast housing is divided into electronics unit (EBOX) and connection unit (ABOX). A major benefit is the closing mechanism with only one screw and the automatic unit replacement. This enables quick assembly and smooth unit replacement for servicing.

Our distributor also has a lot to offer in terms of safety. Equipped with extensive and scalable safety functions, they can be used in safety-related areas. Everything is possible, from the safe disconnection of MOVIMOT drives to the speed-dependent safety functions activated via fieldbus.

Lenze GSS helical-worm gearboxes-centro

Lenze GSS helical-worm gearboxes

Lenze GSS helical-worm gearboxes are a particularly low-noise drive components.

As a compact drive unit in combination with three-phase AC and servo motors, they are extremely versatile. They have a 2- and 3-stage design and can achieve a torque of up to 1250 Nm and a ratio of up to i=1847.

Advantages:

2-stage and 3-stage gearboxes
Hollow shaft with a keyway or shrink disc
Solid shaft with keyway
Foot or flange mounting
Torque plate, including rubber buffer

Can be combined with the following motors:

With three-phase AC motors in line with the ErP Directive in the power range from 0.12 to 15 kW
With servo motors in the power range from 0.25 to 11.3 kW
Drive Package versions in conjunction with the decentralized Inverter Drives 8400 motec cover a power range of up to 7.5 kW

MOVIMOT standard inverter-centro

MOVIMOT standard inverter

For field operation: MOVIMOT, the digital frequency inverter with a power range of 0.37 to 4.0 kW. Flexible application thanks to IP54 degree of protection, also optionally available in IP55, IP65 or IP66.

Standard inverter directly mounted on the motor or for mounting close to the motor

Standard inverters for direct mounting on the motor. Thanks to our modular concept, the MOVIMOT D series can be combined as standard with our DR.. series AC motors with different levels of efficiency.

Mounting close to the motor is also possible. There are different diagnostics options available. A 3 color LED signalizes operating and fault states. The inverter is equipped with a diagnostic interface, an RS-485 serial interface and much more. Our frequency inverter is flexibly available with a connection voltage of 200 V to 240 V or 380 V to 500 V.

Fast installation
The pluggable motor connection enables fast replacement during servicing.

Simple startup
Manually settable setting setpoints.

Reliable design
Additional mechanical protection not necessary thanks to the robust solid metal housing. Permanent IP protection of the electronics.

Well-conceived communication
Through standardized fieldbus interfaces with all commercially available bus systems.

Durable electronics
Optimized, motor-independent cooling for use in a speed range of 300 rpm to 3000 rpm.

Flexible installation
With field distributors, rational connection of fieldbus and sensors. Directly on the motor or separately next to the drive.

Lenze GKS helical-bevel gearboxes-centro

Lenze GKS helical-bevel gearboxes

Lenze GKS helical-bevel gearboxes have the major benefit of enabling extremely precise and reproducible positioning movements owing to their high torsional stiffness and low backlash.

In connection with three-phase AC and servo motors, they form an extremely compact unit. They are available in a 3- and 4-stage design with a torque of up to 11,639 Nm and a ratio of up to i=1936.

Advantages:

3-stage and 4-stage gearboxes
Hollow shaft with keyway or shrink disc
Solid shaft with keyway
Foot or flange mounting
Torque plate, including rubber buffer

Can be combined with the following motors:

With three-phase AC motors in line with the ErP Directive in the power range from 0.12 to 45 kW
With servo motors in the power range from 0.25 to 20.3 kW
Drive Package versions in conjunction with the decentralised Inverter Drives 8400 motec cover a power range of up to 7.5 kW

MOVIFIT basic, basic inverters-centro

MOVIFIT basic, basic inverters

Simple user interfaces for short installation times

MOVIFIT basic, the decentralized basic inverter for efficient materials handling technology. Less is more: we have reduced the MOVIFIT basic to include only the functions and features necessary, and its design means that it is the ideal inverter for the lower function range. The frequency inverter is available in power ranges of 0.75 kW and 1.5 kW.

Even before installing it, this basic inverter will convince you with straightforward and fast order processing. All you need to do is select the required power rating and control, AS-Interface or binary, and one of eight available unit variants. No additional consulting or project planning effort required.

Project planning, installation and startup is even easier with this member of our drive controller family. It seems only natural that we have also integrated a power bus for field installation.

Extremely short installation times? Yes! You want to reduce investment costs for your systems? This is also possible. Thanks to consistent integration of the power distribution with innovative and reliable connector technology.

The energy for AC 3 x 400 V is distributed via the FieldPower terminal from Weidmüller, which is integrated in the unit. Two sensors can be connected to the unit in addition to the drive function when using AS-Interface. These are signaled to the system controller via AS-Interface master without additional costs and the signals can then be processed in the system controller.

Lenze GKR bevel gearboxes-centro

Lenze GKR bevel gearboxes

Lenze GKR bevel gearboxes are a showpiece for lightweight engineering. They are also highly efficient and feature wear-free toothing.

In combination with three-phase AC and servo motors, bevel gearboxes form an efficient, compact drive unit. They are available in a 2-stage design with a torque of up to 450 Nm and a ratio of up to i=76.

Our designs for you:

2-stage gearbox
Hollow shaft with keyway or shrink disc
Solid shaft with keyway
Foot or flange mounting
Torque plate, including rubber buffer

Can be combined with the following motors:

With three-phase AC motors in line with the ErP Directive in the power range from 0.06 to 7.5 kW
With servo motors in the power range from 0.25 to 7.1 kW
Drive Package versions in conjunction with the decentralised Inverter Drives 8400 motec cover a power range of up to 7.5 kW

Lenze G500-B bevel gearboxes-centro

Lenze G500-B bevel gearboxes

Lenze G500-B bevel gearboxes are characterised by high permissible radial forces, closely stepped ratios and a low backlash.

They are available in a 2- and 3-stage design with a torque of up to 20000 Nm and a ratio of up to i=360.

Advantages:

Highly efficient right-angle gearbox with a compact design for space-optimised assembly
Standardised shaft and flange dimensions for easy machine integration
Low backlash and high torsional stiffness guarantee precise results during positioning

Can be combined with the following motors:

With Lenze Smart Motor m300 at a rated torque of 1.75 Nm and 5 Nm
With IE1, IE2 and IE3 three-phase AC motors according to the ErP Directive in the power range from 0.06 to 55 kW
With inverter-optimised MF three-phase AC motors in the power range from 0.55 to 22 kW
With synchronous servo motors and asynchronous servo motors in the power range from 0.25 to 38.4 kW

Lenze G350-B smart geared motor-centro

Lenze G350-B smart geared motor

New freedom in motion for engineers. Lenze G350-B smart geared motor reduce the number of different drive versions by up to 70%. There is no contactor or starter, you can set whatever fixed speeds you like and there are lots of integrated functions for materials handling applications. The smart motor also meets the strictest energy efficiency requirements and allows for really convenient operation via a smartphone.

The setting range of 45 to 220 rpm and maximum torque of 25, 50 or 75 Nm make the g350 smart geared motor the perfect solution for conveying boxes and containers horizontally.

The advantages for you:

Easy modification of the mechanical connection on site reduces the number of variants
Reduction in variants thanks to the use of optimum oil (broad temperature range (-30 to +40°C) and food-grade lubricant
Freely adjustable speed reduces the number of different drives
Integrated soft start function
Less wiring thanks to electronic contactor and motor protection function
Excellent energy efficiency
Can be operated with an NFC-capable smartphone and Lenze app

Sew Eurodrive MOVIDRIVE MDR regenerative power supply units-centro

Sew Eurodrive MOVIDRIVE MDR regenerative power supply units

Energy recycling = cost savings

Is potential energy from lowering and braking movements converted into waste heat in your applications?

Put a stop to that!

Use our MOVIDRIVE MDR regenerative power supply units to harness the regenerative energy of your drives. The MOVIDRIVE MDR regenerative power supply unit acts as a centralized supply and regenerative power supply unit for the connected inverters.

They can be used in combination with our MOVIDRIVE B drive inverters and MOVITRAC B frequency inverters.

Several inverters can be connected to the MOVIDRIVE MDR in a DC link connection. No braking resistors – no waste heat, instead braking energy is fed back into the supply system.

Sew Eurodrive MOVIAXIS multi-axis servo inverter-centro

Sew Eurodrive MOVIAXIS multi-axis servo inverters

Powerful, modular and compact

Are you looking for a highly dynamic servo drive solution which meets your requirements with asynchronous or synchronous servomotors? Then take closer look at the MOVIAXIS multi-axis servo inverters.

Their versatility makes them so adaptable, from tiered motion control or simple positioning through to support of specific kinematics. MOVIAXIS can be flexibly and individually configured for your application and in a way which allows optimal adaptation to the machine and system concepts.

An axis system with MOVIAXIS always consists of a power supply module and a variable number of axis modules.

These also include optional modules such as master module, motion control or 24 V switched-mode power supply, which integrate perfectly within the servo solution both mechanically and electronically.

Also available are a wide selection of communication and automation options as well as energy-efficient components such as the energy storage unit. And MOVIAXIS of course supports all common encoder systems on the motor and track.

MOVIAXIS multi-axis servo inverter – solutions for the future:
Maximum control quality in a compact design in the power range from 10 kW supply system and up to 187 kW peak power.

Sew Eurodrive MOVIDRIVE B drive inverters-centro

Sew Eurodrive MOVIDRIVE B drive inverters

They control everything: MOVIDRIVE B drive inverters

Whether asynchronous AC drives or synchronous servo drives – the MOVIDRIVE® B drive inverters can control it. The broad power range from 0.55 kW to 315 kW, the fantastic overload capacity and the modular concept of the MOVIDRIVE B inverter help to improve the flexibility and efficiency of your applications.

The compact design of the MOVIDRIVE drive inverter saves space in the control cabinet, while its high user-friendliness ensures that you save time during parametrization, while the intelligent IPOS positioning and sequence control is included as standard.

A multitude of inputs and outputs in the drive inverter ensure a competent basic functionality. Optional communication and technology modules provide for quick and easy extension.

Sew Eurodrive MOVITRAC B standard inverters-centro

Sew Eurodrive MOVITRAC B standard inverters

Compact – versatile – safe

Time is money. The MOVITRAC B series frequency inverters help you save both. Their basic operation means that these standard inverters are quickly ready for use and perform your tasks extremely efficiently: from fan applications to materials handling and basic positioning.

Ideally suited for motors in our DR.. series, MOVITRAC B frequency inverters control the speed of asynchronous and explosion protected EDR.. motors.

You can use the standard MOVITRAC B design in materials handling, pump applications or in centrifuges.

Our modular concept with optional extensions and extensive accessories also gives you the flexibility to respond to specific requirements.

Lenze GFL shaft-mounted helical gearbox-centro

Lenze GFL shaft-mounted helical gearboxes

In combination with three-phase AC and servo motors, our Lenze GFL shaft-mounted helical gearboxes represent a compact, effective drive unit.

A low toothing backlash guarantees maximum accuracy. In addition, they can also distribute the power output and torque via an output shaft on both sides. The gearboxes are available in a 2- and 3-stage design with a torque of up to 11,615 Nm and a ratio of up to i=856.

Advantages:

2-stage and 3-stage gearboxes
Hollow shaft with keyway or shrink disc
Solid shaft with keyway
Foot or flange mounting
Torque plate, including rubber buffer

Can be combined with the following motors:

With three-phase AC motors in line with the ErP Directive in the power range from 0.12 to 45 kW
With servo motors in the power range from 0.25 to 20.3 kW
Drive Package versions in conjunction with the decentralised Inverter Drives 8400 motec cover a power range of up to 7.5 kW

Sew Eurodrive MOVITRAC LTP-B standard inverters in IP20-centro

Sew Eurodrive MOVITRAC LTP-B standard inverters in IP20

Frequency inverters that make your life easier!

Connect, choose your motor, perform the automatic calibration and your application will just run and run. Designed and developed for open-loop speed control of synchronous and asynchronous motors, the MOVITRAC LTP-B with IP20 housing is available with up to 15 kW of power. This allows you to complete your tasks in conveyor applications, hoists, fans and pumps with a high level of energy efficiency – even without an encoder.

Why make it complicated when it could be so easy? That’s what we were thinking when we designed the range of functions and the operational principle for our MOVITRAC LTP-B series. The result? Compact functionality and an integrated control plate that makes handling easy for you.

Reduce your energy costs, not your power! Thanks to the energy saving function in the partial load rand and when idling.

And thanks to the STO (Safe Torque Off) safety function, these frequency inverters are not just safe and compact – they are also economical and efficient.

And if you also need wall-mounted frequency inverters, simply choose the design with IP55/NEMA 12 protective housing – with power ratings of up to 160 kW.

 

Lenze G500-S shaft-mounted helical gearbox-centro

Lenze G500-S shaft-mounted helical gearboxes

Lenze G500-S shaft-mounted helical gearboxes are characterised by high permissible radial forces, closely stepped ratios and a low backlash.

They are available in a 2- and 3-stage design with a torque of up to 19000 Nm and a ratio of up to i=495.

Advantages:

Slimline design saves precious installation space for the machine
Solid shaft, hollow shaft and shrink disc for direct integration into the machine
A high level of accuracy with an axial output guarantees maximum efficiency
High centre distance

Can be combined with the following motors:

With Lenze Smart Motor m300 at a rated torque of 1.75 Nm and 5 Nm
With IE1, IE2 and IE3 three-phase AC motors according to the ErP Directive in the power range from 0.06 to 55 kW
With inverter-optimised MF three-phase AC motors in the power range from 0.55 to 22 kW
With synchronous servo motors and asynchronous servo motors in the power range from 0.25 to 38.4 kW

Lenze GST helical gearboxes-centro

Lenze GST helical gearboxes

In combination with three-phase AC and servo motors, our Lenze GST helical gearboxes represent a compact, powerful drive unit.

They are robust and are characterised by high permissible radial forces, closely stepped ratios and a low backlash. They are available in a 1-, 2- and 3-stage design with a torque of up to 5920 Nm and a ratio of up to i=435.

Advantages:

1-stage, 2-stage and 3-stage gearboxes
Solid shaft with keyway
Foot or flange mounting

Can be combined with the following motors:

With three-phase AC motors in line with the ErP Directive in the power range from 0.06 to 45 kW
With servo motors in the power range from 0.25 to 20.3 kW
Drive Package versions in conjunction with the decentralised Inverter Drives 8400 motec cover a power range of up to 7.5 kW

Lenze G500-H helical gearboxes-centro

Lenze G500-H helical gearboxes

Lenze G500-H helical gearboxes are characterised by high permissible radial forces, closely stepped speed reduction ratios and a low backlash.

They are available in a 2- and 3-stage design with a torque of up to 14000 Nm and a ratio of up to i=370.

Advantages:

Closely scaled in terms of size/torque, allowing optimum adaptation to the machine
Standardised shaft and flange dimensions for easy machine integration
High degree of efficiency

Can be combined with the following motors:

With Lenze Smart Motor m300 at a rated torque of 1.75 Nm and 5 Nm
With IE1, IE2 and IE3 three-phase AC motors according to the ErP Directive in the power range from 0.06 to 55 kW
With inverter-optimised MF three-phase AC motors in the power range from 0.55 to 22 kW
With synchronous servo motors and asynchronous servo motors in the power range from 0.25 to 38.4 kW

Lenze G700-P planetary gearboxes-centro

Lenze G700-P planetary gearboxes

Lenze G700-P planetary gearboxes are an excellent solution for dynamic and cost-optimised applications. Its high level of reliability, long service life and excellent scalability make it a precise solution for demanding machine tasks.

Advantages:

For applications in which a medium backlash is required
High input speed possible: max. input speed 18,000 rpm
Wide transmission range: i=3 to 512 in 24 ratios
Wide torque range: 5 to 800 Nm in five sizes
Lifetime lubrication for any mounting position
Can be combined with the following motors:

With synchronous servo motors and asynchronous servo motors in the power range from 0.25 to 20.3 kW

Lenze IE1 MD three-phase AC motors-centro

Lenze IE1 MD three-phase AC motors

Lenze IE1 MD three-phase AC motors for basic machine duties.
MD three-phase AC motor (IE1) for constant and variable motion.

Power range: 0.12 to 22 kW
Torque range: 0.8 to 144 Nm
Suitable for inverter and mains operation.

Advantages:

Four-pole motors in the designs B3, B5 and B14
Setting range up to 1:17.4 with constant torque
Enclosure IP55
Connection options: terminal box, HAN plug and ICN plug
Temperature monitoring
Modular system to adjust the functions to your application
Feedback systems
Service and holding brakes
Integral fans and blowers

Lenze IE3 m550-P three-phase AC motors-centro

Lenze IE3 m550-P three-phase AC motors

Energy efficient Lenze IE3 m550-P three-phase AC motors for constant and variable motion.

Power range: 0.75 to 45 kW
Torque range: 4.9 to 290 Nm

Suitable for inverter and energy efficient mains operation.

Advantages:

IE3 energy efficient
Four-pole motors in the designs B3, B5 and B14
Setting range up to 1:17.4 with constant torque
Enclosure IP55
Connection options: terminal box, HAN plug and ICN plug
Temperature monitoring
Modular system to adjust the functions to your application
Feedback systems
Service and holding brakes
Integral fans and blowers

Sew Eurodrive MOVITRAC LTE-B basic inverters in IP20-centro

Sew Eurodrive MOVITRAC LTE-B basic inverters in IP20

Frequency Inverters that fit!

Our MOVITRAC LTE-B frequency inverters are characterized by a compact range of functions, simple handling and quick integration into your application. They are available in three sizes for power ranges from 0.37 kW to 11 kW and line voltages of 115 V, 230 V and 400 V.

Designed and developed for controlling the speed of asynchronous motors without an encoder, MOVITRAC LTE-B reliably implements your simple handling applications. These basic inverters offer economic advantages, particularly in small, modular conveyor lines, and in fans and pumps.

The standard version of MOVITRAC LTE-B for control cabinet installation is supplied with IP20 degree of protection. For field use, the MOVITRAC LTE-B frequency inverter supplied with IP66- field housing is the right solution.

Easy communication with all common fieldbus types; simply use DFx gateways

 

Lenze MF three-phase AC motors-centro

Lenze MF three-phase AC motors

Lenze MF three-phase AC motors are a compact and highly efficient solution for operating on inverters.
Energy-efficient, inverter-optimized MF three-phase AC motor for variable motion.

Power range: 0.55 to 22 kW
Torque range: 1.53 to 59.2 Nm

Particularly suitable for tasks that demand large setting ranges with minimal sizes.

Advantages:

Exceeds efficiency class IE2
Four-pole motors in the designs B3, B5 and B14
Setting range up to 1:24 with constant torque
Enclosure IP55
Connection options: terminal box, HAN plug and ICN plug
Temperature monitoring
Modular system to adjust the functions to your application
Feedback systems
Service and holding brakes
Integral fans and blowers

Lenze MF three-phase AC motors-centro

Lenze MF three-phase AC motors

Lenze MF three-phase AC motors are a compact and highly efficient solution for operating on inverters.
Energy-efficient, inverter-optimized MF three-phase AC motor for variable motion.

Power range: 0.55 to 22 kW
Torque range: 1.53 to 59.2 Nm

Particularly suitable for tasks that demand large setting ranges with minimal sizes.

Advantages:

Exceeds efficiency class IE2
Four-pole motors in the designs B3, B5 and B14
Setting range up to 1:24 with constant torque
Enclosure IP55
Connection options: terminal box, HAN plug and ICN plug
Temperature monitoring
Modular system to adjust the functions to your application
Feedback systems
Service and holding brakes
Integral fans and blowers

Sew Eurodrive MOVIMOT gearmotor with inverter-centro

Sew Eurodrive MOVIMOT gearmotor with inverter

Proven products for decentralized drive technology: Gearmotor with inverter

Your proven path to decentralized drive technology: MOVIMOT, a combination of a gearmotor and a digital frequency inverter. Available in all designs and mounting positions of our standard gearmotors, with or without a brake. A gearmotor and a digital frequency inverter matched to your connection voltage with 380 V to 500 V or 200 V to 240 V. MOVIMOT is the power duo for applications in the power range from 0.37 kW to 4.0 kW. Even with an integrated frequency inverter, MOVIMOT requires only marginally more installation space than conventional gearmotors.

Easy-to-use basic functions can be scaled up with a wide range of additional functions. The manual setpoint setting function allows you to easily start up the drive on site.

Extended parameterization is also possible using our MOVITOOLS MotionStudio software. Flexible connection technology with optional industrial plug connectors. Can be used worldwide thanks to country-specific approvals.

The MOVIMOT connection technology ensures fast, error-free installation. A T distributor for 400 V, 24 V and control signals is integrated into the unit. We also offer a broad range of field distributors and prefabricated hybrid cables so you can implement the ideal installation topology for any system.

MOVIMOT drives fitted with hybrid cables can be connected to a field distributor and made ready for operation in seconds. For servicing, the connector can be disconnected without any danger, even by personnel without technical expertise. The drive can be replaced and the new drive reconnected quickly. The system is ideal for all systems which demand high levels of operating availability.

CMP ELVCD: Sew Eurodrive Extra-Low Voltage Compact Drive-centro

CMP ELVCD: Sew Eurodrive Extra-Low Voltage Compact Drive

The CMP ELVCD: A little voltage with a lot of benefits

Up to now, extra-low voltage drives have been particularly in demand for applications in the automotive and consumer goods industries. However, compared to conventional industrial servo drives, this field has different product requirements in terms of robustness, durability, serviceability and scalability.

This is why, during the conception of the CMP ELVCD, our focus was not on yet another extra-low voltage drive, but rather on creating a complete industry-standard, decentralized servo drive with all the characteristics of an SEW­EURODRIVE servo gearmotor.

For this reason the CMP ELVCD is fully integrated into our automation system with MOVI‑PLC®. It can be used for all automation tasks with dynamic and precise motion sequences up to 500 W.

Sew Eurodrive MOVI‑SWITCH gearmotor with motor starter-centro

Sew Eurodrive MOVI‑SWITCH gearmotor with motor starter

Additional space requirements in the control cabinet? Not with the MOVI‑SWITCH

Are you looking for a particularly sturdy and economical gearmotor with integrated switching and protection functions? No problem. The MOVI-SWITCH gearmotor for decentralization applications up to 3 kW is exactly what you are looking for. The switching and protection functions integrated in the motor terminal box make it possible.

You can choose between designs with a contactless star bridge connector or a contact-based switching element.

All in one motor. Our 3 MOVI-SWITCH designs are compact, sturdy and equipped with high-performance features. Thermal motor protection and an optional AS-Interface, all integrated into the motor in a compact fashion.

All AC motors and brakemotors in the MOVI-SWITCH range can be easily combined with suitable gear units from our SEW‑EURODRIVE modular system.

MOVI-SWITCH can be used in a wide range of ambient conditions. It is available with the IP54 degree of protection, or alternatively with the IP55, IP65 or IP66 degrees of protection, and is designed for ambient temperatures from -25 °C to +40 °C (to +60 °C).

 

CMP ELVCD: Sew Eurodrive Extra-Low Voltage Compact Drive-centro

CMP ELVCD: Sew Eurodrive Extra-Low Voltage Compact Drive

The CMP ELVCD: A little voltage with a lot of benefits

Up to now, extra-low voltage drives have been particularly in demand for applications in the automotive and consumer goods industries. However, compared to conventional industrial servo drives, this field has different product requirements in terms of robustness, durability, serviceability and scalability.

This is why, during the conception of the CMP ELVCD, our focus was not on yet another extra-low voltage drive, but rather on creating a complete industry-standard, decentralized servo drive with all the characteristics of an SEW­EURODRIVE servo gearmotor.

For this reason the CMP ELVCD is fully integrated into our automation system with MOVI‑PLC®. It can be used for all automation tasks with dynamic and precise motion sequences up to 500 W.

Sew Eurodrive MOVI‑SWITCH gearmotor with motor starter-centro

Sew Eurodrive MOVI‑SWITCH gearmotor with motor starter

Additional space requirements in the control cabinet? Not with the MOVI‑SWITCH

Are you looking for a particularly sturdy and economical gearmotor with integrated switching and protection functions? No problem. The MOVI-SWITCH gearmotor for decentralization applications up to 3 kW is exactly what you are looking for. The switching and protection functions integrated in the motor terminal box make it possible.

You can choose between designs with a contactless star bridge connector or a contact-based switching element.

All in one motor. Our 3 MOVI-SWITCH designs are compact, sturdy and equipped with high-performance features. Thermal motor protection and an optional AS-Interface, all integrated into the motor in a compact fashion.

All AC motors and brakemotors in the MOVI-SWITCH range can be easily combined with suitable gear units from our SEW‑EURODRIVE modular system.

MOVI-SWITCH can be used in a wide range of ambient conditions. It is available with the IP54 degree of protection, or alternatively with the IP55, IP65 or IP66 degrees of protection, and is designed for ambient temperatures from -25 °C to +40 °C (to +60 °C).

Sew Eurodrive planetary gear units P-X series-centro

Sew Eurodrive planetary gear units P-X series

High torque, high thermal rating

If you need a compact, cost-effective solution with high thermal ratings, our planetary gear units of the P-X series are the right solution. These standardized, powerful industrial gear units combine planetary gear units of the P series with primary gear units of the proven X series of industrial gear units. As an added benefit, all the mounting options and optional features of the X series are also available for this solution.

The P-X series combines all the advantages of two groundbreaking industrial gear unit concepts. The special optimization of the gear unit housing and the shared oil chamber for both gear units ensure very high thermal ratings.

Compact, flexible and cost-effective

Whether hollow shaft or solid shaft, with a key, smooth or spline according to DIN 5480; whether a horizontal, vertical or angled mounting position, the P-X series offers you a number of options. The flange’s increased load bearing capacity means that you can flange-mount even heavy motors.

This offers you extraordinary economic advantages, for example through simple installation and alignment. In combination with the high operational reliability, these advantages also help you to reduce maintenance costs.

Lenze SDSGA asynchronous servo motors-centro

Lenze SDSGA asynchronous servo motors

Lenze SDSGA asynchronous servo motors for precisely controlled motion.

Torque range: 0.27 to 1.9 Nm
Power range: 0.075 to 0.6 kW

Particularly suitable for machine tasks where hygiene is critical.

Advantages:

Smooth surface
Plug connections for quick mounting and easy serviceability
Resolver as feedback
Available with holding brake
IP54 or IP55 enclosure

Sew Eurodrive planetary gear units P-X series-centro

Sew Eurodrive planetary gear units XP series

High-performance planetary gear units with free drive shaft

The industrial gear units XP series are extremely space-saving planetary gear units for very high torque ratings up to 5 200 kNm. They enable specific drive solutions for applications in the high-performance area. An additional advantage: They are able to very flexibly customize the amount of stages and the individual gear ratios to your application.

Depending on the application, it is important for users and outfitters of systems to position gear units and motors separately from each other. We have designed our XP series as a stand-alone gear unit with a free input shaft for such purposes.

Do you need a primary gear unit? No problem. Select a gearmotor from our comprehensive modular concept. We will attach it directly to the planetary gear unit for you. Or you can combine the XP gear unit with an industrial gear unit from the X series.

You need even more power? No problem. We offer you project-specific industrial gear units from the XP series whose performance surpasses the stated torque range of 5 200 kNm.

Sew Eurodrive planetary gear units P series

Sew Eurodrive planetary gear units P series

Space-saving planetary gearmotors for operations with low output speed

Process engineering plants which run slowly depend on low output speeds and a high torque. This includes mixers and rotary filters. In addition to these features, users and outfitters of comparable systems demand reliable drive components.

With the Sew Eurodrive industrial gear units of the P series you receive powerful and reliable planetary gearmotors which can be supplied at short notice in standardized versions, depending on the size. Thanks to our modular concept, you have access to a comprehensive range of optional equipment.

Primary gearmotor for more power

Industrial planetary gear units of the P series receive powerful support via an upstream gearmotor. Additional components which demand a lot of space and increase costs are thus a thing of the past. This means couplings, intermediate flanges and adapter flanges.

Lenze MCA asynchronous servo motors-centro

Lenze MCA asynchronous servo motors

Lenze MCA asynchronous servo motors are the ideal solution for dynamic applications.
MCA asynchronous servo motor for precisely controlled motion.

Torque range: 2.0 to 1,100 Nm
Power range: 0.8 to 53.8 kW

Particularly suitable for environments which require minimal dimensions and a high degree of engineered operational reliability.

Advantages:

Small volume
Low moments of inertia
Plug connections for quick mounting and easy serviceability
Electronic nameplate for easy commissioning
Resolver as feedback, alternately: incremental encoder or absolute value encoder
Available with holding brake
Natural or forced ventilation
Enclosure IP65 (forced ventilation IP54), in the range from 500 to 1,100 Nm IP23

ML series Sew Eurodrive industrial gear units

ML series Sew Eurodrive industrial gear units

Service-friendly helical gear units and bevel-helical gear units for large machines

Simple assembly, startup and maintenance are essential for users or original equipment manufacturers of machines and systems. These are exactly the benefits that the ML series industrial gear units feature. In addition to its high usability, ML series provides you with an extremely rigid housing concept that supports stability. This means that the helical gear units and bevel-helical gear units can be used in large special-purpose and individual machines for the entire range of industrial applications.

ML series industrial gear units are graduated in five sizes, which offers you a large number of application options.

s a leading manufacturer of industrial gear units, we provide you with the maximum amount of flexibility and variability. Applying the principle of welded construction, we are prepared to implement customer-specific applications and customized solutions for you at any time.

Lenze MQA asynchronous servo motors

Lenze MQA asynchronous servo motors

Lenze MQA asynchronous servo motors achieve their performance through high torque and exceptional dynamics. Naturally ventilated MQA asynchronous servo motor for precisely controlled motion.

Torque range: 66 to 1,100 Nm
Power range: 10.6 to 60.2 kW

Particularly suitable for applications with heavy motor demands.

Advantages:

Low moments of inertia
Plug connections for quick mounting and easy serviceability
Electronic nameplate for easy commissioning
Resolver as feedback, alternately: incremental encoder or absolute value encoder
Available with holding brake
Enclosure IP23